HT201269 Do I need to get a fresh Sim card? My wife's 3G has the old style sim and my old 4 (that I am passing to her) has the micro-sim, they are different phone numbers - what do I do?
Good morning, this may sound dumb but I don't know how to to do this.
My wife currently has a iPhone 3g with her mobile number and the Sim card is the old style standard sim
I am transferring my iPhone 4 to her and that has a microsim with my number info on it.
Does this mean that I have to get a clean microsim for her or will all the data transfer from Itunes to the 'new' iP4.
Now, how do I actually go about doing it?
Do I take my sim out ot the iP4 and put it into the micro adaptor and slot it into her phone and back up from her machine, or what do I do - Please respond in technophobe (I'm an old duffer:-) )
Uncle H
You need to get a sim sim, activated, wirh your wife's account info on it. Your carrier should give you one for free. Either that, or you cut down your wife's existing sim. If you do a Google search you'll find instructions/tools on how to do so.
After you get the sim situation straightened out, backup your wife's 3G in iTunes. Then on your 4, turn off iMessage, FaceTime, Find My Phone & delete the iCloud account. Then: Settings>General>Reset>Erase All Content & Settings. When finished, restore from the backup you made of the 3G. Sync her content to the phone.
You should be good to go.
Similar Messages
-
I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.
I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. -
Connected ipad to computer with usb and downloaded 2 apps that aren't showing up on my ipad. Says they are downloaded on itunes, but I don't see anything on my ipad. Tried downloading AGAIN and it says the same thing. Downloaded but don't see them on the ipad. I have synced it several times. Am I missing something?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
How do I get my iPhone3 to stop showing 2 new messages in the inbox when they are none there?
The mailbox icon on my iPhone has the little red bubble with a number 2 next to it, but when I go to my inbox, I don't see any unread messages. Is there something I did wrong? What do you suggest I do? Thanks!
Hey jel177!
It seems like you may need to turn off your iTunes in the Cloud features and download or sync the songs manually to your phone. Here is a link that can help you adjust those settings:
iTunes Match - iPhone
http://help.apple.com/iphone/7/#/iph6e2dfb83
Then, you can use this link to find your purchases and download them to your phone:
Download past purchases
http://support.apple.com/kb/ht2519
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
Hi, so I pushed autofill because I thought that it would put music on my phone from a different iTunes library but it didn't work, and now the songs show up grey in my music on my phone and they won't play, but they are still there. What can I do to fix this and get rid of the grey songs?
Go back to iTunes, select the Music tab, uncheck the 'sync music; button, then hit apply.
-
I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring. One phone is for work and one is for private and I don't need both phones to ring from one call. It's bizarre.......is this supposed to be like this? If so where can I turn it off?? And while we are at it iOS8 has installed iBooks on both of my phones and iTunes won't let me uninstall it. I don't need or want iBooks on my phones.
Hi,
There are two easy fixes to this.
One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
Two, go to Settings and turn-off "Handoff". This can be found under the General page.
Hope this helps! -
I sent my Iphone 5c in for repair and when they sent it back my sim card wasn't in it is there any way i can have them send it back or do I need to get a new sim card for it?
You'll have to get a new one from your carrier. I believe the shipping instructions for mail in service explicitly tell you to take it out as you will most likely not receive the same phone back. Apple doesn't repair most phones, they replace them.
-
I updated my iphone 4 and my daughter's iphone 4s. It's a family share plan - same bill, different phone numbers. My texts are showing up on her phone, and vise versa. Only to contacts that we both have - ex. my mother I'm sure I've done something wrong in the icloud share ........help.
ON either device go to settings - message - send&receive - either uncheck or remove the apple id.
-
on a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed. How do I remove them? they are constantly checked even when i uncheck them. this is causing copies of my text messages to go to those phones.
Are you using the same AppleID for all those phones? If so, get them all their own AppleID.
KOT -
I just upgrade from the 4 to 5s. Are my apps supposed to transfer over and perhaps it just takes time to load like my email and pitures are? I tried to install apps and it showed that they are already installed. What do I do to get them to show up?
Hi, Twilavegas3.
Thank you for visiting Apple Support Communities.
If your restored from a backup and the apps that are missing on the device show "Open" in the App Store, then they are located on other pages on your iPhone or are in folders. Also, with the iOS 7 update most developers have changed icon badging. This can cause some applications to be difficult to find.
iPhone User Guide
Cheers,
Jason H. -
Hi my iPhone does not have reception. I have tried the sim in a different phone and it has reception. Any ideas what I can do
try these things
-reset your network by going setting> general>reset>reset network setting
-toggle airplane mode on and off
-then back up your information and then restore as new.
-still no service then if your within your limited warranty apple can replace it for nothing if not it is 199$ for replacement -
iMac screen appears to have smudges under the glass along the top of the screen. They are not on the surface and it doesn't matter what wallpaper is in place. Anyone else had this happen?
The " glass" front of your iMac is really not glass, at all, but an optically clear polycarbonite (plastic) that a black border painted or possibly "printed" on the backside (to hide the strong magnets that hold this cover on) that has a metal frame glued to the back to which this frame is held in place with very strong magnets.
You use one or two small suction cups or a suction cup from a windshield mounted mobile GPS mount or purchase a small commercial glass cup, that is used to handle bare glass, to get the polycarbonite frame off.
The reason I mention the material is polycarbonite is that you should NOT be using ANY type of retail/commercial window glass cleaners on this front glass or on the LCD screen.
Polycarbonite easily scratches and clouds when using ANY conventional glass cleaning solutions.
You need to use a lint-free, microfiber style cloth dampened in warm water (completely wring the water out of the microfiber cloth to the point cloth is just warm and damp with NO water dripping at all from the cloth) and use this to get the screen and glass don't screen clean. -
My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software. I'm not sure what to do to remedy this situation.
This might sound like a silly question, but are you sure the iOS devices (iPhone, iPad, iPod touch etc.) are still trying to connect to the same network from your own Airport router, as the MacBook Pros are? If you tap Settings on them, is the network name next to where it says Wi-Fi, the right one?
I've got a weird feeling that either in the past couple of days, a neighbour got an Airport device and hasn't set it up yet (causing your iOS devices to try to help), or that perhaps there's an issue with your Airport router and they're noticing it and trying to help out, while for whatever reason, Airport Utility isn't opening itself on the MacBook Pros like it normally should if there's a problem.
If you open Airport Utility on one of the MacBook Pros, does it report any problems with your Airport device, and can you view/edit the settings on it? -
I have photos with the same numer but they are different photos how can I fix that?
I have photos with same names but they are different photos. Can I rename these photos ? How can I do this?
you can save a file with the same name by dragging and dropping from iphoto to a Finder folder
but (and there are always buts) you can only do up to 4 photos at a time
any more and you are not given the option
This is the error message you get:
An item named “IMG_8770.JPG” already exists in this location. Do you want to replace it with the one you’re moving?
4 or lesss your options are:
Keep Both Stop Replace
5 or more your options change
Skip Stop Replace
it will add a space and a 2 to the name
IMG_8816.JPG turns to IMG_8816 2.JPG
this is the solution I was looking for; let the computer do the name change
Cheers! -
I have added photos to a portfolio website I'm building and a lot of them look VERY grainy when you click on them. They are nice clean large files and can print bat high res way over 16" x 20" so whats happened to them in iWeb?
When you are dealing with websites, image file size is a trade off between quality and download speed. There's not a lot of point to having high quality images if they take too long to download in the browser.
Nowadays we also have to consider the device that the end user is viewing the images on. An image that is optimized for viewing on a large screen is total overkill and unsuitable for those using mobile devices.
Really we should be supplying different versions of media files for different devices using @media rules in the stylesheet but this is rather outside of the scope of iWeb. If you use the built in image optimizer and the iWeb Photo template with slideshow, the application will optimize the images according to the way in which you set this function in preferences and the slideshow size will be automatically reduced for those viewing it on smaller screens.
If you want to give your viewers the opportunity to view large, high quality images, you can supply them as a download.
Maybe you are looking for
-
Goods receipt for multiple line items
I have a SC with two line items: L1 = 5 pieces L2 = 10 pieces Let's say the supplier delivered 5 pieces of L2 and L1 is still outstanding. I cannot do a goods receipt for 5 pieces for L2 and 0 for L1 as it requires a number larger than 0. Does
-
Need help on storing persistance records in J2EE JSP application
Hi, I want to store a hashtable of info with about five attributes (id, name, username, date) in a persistent state in JSP order to not always call the database. I am either going to use session or request objects. My question is if it's a good idea
-
Oracle Ebiz 12.1.3 versus 12.1.1 changes
Hi All, I am working with oracle apps 12.1.3 which involves kind of comparison analysis with 12.1.1 and based on this result I should go ahead with next part of my work. I could not see ETRM help for 12.1.3. Is there any documentation available on th
-
Gcc4.5, lapack/blas libraries, fink/mac ports - need help
I have been compiling a model for my research on our lab's Linux cluster, and want to switch to running in on my macbook (osx 10.5.8). I have to set user-specified fc and cc overrides, flags for lapack and blas libraries, and env. variables for mpi a
-
Upgrade 10.2 to 11.2 manualy using cold backup copy on new server.
Hi, I am going to manually upgrade my databases to 11.2 from 10.2. I will use cold backup of 10.2 and copy in to the new server Red Hat Linux 5. I got a Note (742108.1) done for upto 10.2.0.5 and it tells to set orapwd file=$oracle_HOME/dbs/orapw<SID