HT201280 adding a row

how do you add a row in numbers?

One of several ways:
Select a cell, right click, choose to add a row below or above.
Select a cell, go to the menu item Table/Add Row Above (or Below).
Select multiple cells spanning two or more rows, go to the menu item Table/Add Rows Above (or Below)
Select a cell in the last row of the table, hit Return to add a row
Click the little gray box below the last row number to add one row.
Click and hold the little gray box below the last row number and drag down to add multiple rows.

Similar Messages

BI-IP - Bex Analyser - Adding colums / rows in workbooks

Hi experts,
In BI-IP (BW 7) in Bex Analyser we are facing the following problem:
In the workbook if the user inserts a column nearby the input ready columns and inputs values at the time of transfer / save values, the system automatically copies these values to the next input column. The same if they insert rows and add values, at the time of transfer values the system deletes the row but adds the values in the above row.
Is it how Bex Analyser (workbook) works or we are having a problem?
Thanks and regards,
MA
Edited by: Maria Almeida on Apr 30, 2008 1:16 AM
Edited by: Maria Almeida on Apr 30, 2008 1:17 AM

Hi Maria,
Please do not take it offesive.
The issue you guys are encountering is due to lack of Training to Users.
Planning is an intelligent activity. Planners are expected to do their home work before they embark on planning and layouts help capturing values in an orderly manner.
It would be wonderful if you restrict the access to queries, else train the users on the impact and relevance.
As you are aware adding a row is possible in WAD.
Regards
Srinivas

Adding/removing rows in TABLEVIEW

Hi. I've got a TABLEVIEW in one of my subscreens. But when load itab into that tableview with 'LOOP AT...' tableview appears but I can't add rows to it. I can't delete existing rows too. What should I add to my programm to have possibility of adding/removing rows from my tablewiev? Greetings. P.

Hi Friend,
To add/delete rows in your table view.
You have to add/delete rows from internal table fro where you are displaying values.
You have to write code in PAI..
In LOOP ... ENDLOOP check the OK_CODE if it is ADD (for eg.) you have to add a blank row to internal table by just passing a blank work area.
And if it is DELETE (for eg.) delete the row of that index (TABLEVIEW-CURRENT_LINE)...
for these two excersies you have to readjust lines of tableview...after taking number of lines from internal table (DESCRIBE TABLE INT_EX LINES WS_LINES
TABLEVIEW-LINES = WS_LINES) write this piece of code in Intialization.
Hope it will solve the problem.
Regards
Krishnendu

Adding a Row to Table, ComboBox as a TableCellRenderer Problem !!

Hell All:
I have a JTable with one of the Cell as ComboBox. Initially I draw the JTable with Three Rows and the
the ComboBox in the Second Column works fine. I see each comboBox has different Items. The ComboBox also has a Renderer (as I am customizing the Item's Text )
Here is the snippet from my Code.
==========================
// UIEditSubAllocation.ALT_ACCOUNT = 2;
// Get the Viewindex.... to get the correct column
int viewIndex = this.m_suballocTable.convertColumnIndexToView(UIEditSubAllocation.ALT_ACCOUNT);
// get the Table Column...
TableColumn altActColumn = this.m_suballocTable.getColumnModel().getColumn(UIEditSubAllocation.ALT_ACCOUNT);
// Create Three ComboBox..
JComboBox[] altActCell = new JComboBox[3];
for (int i =0;i< 3;++i) // adding Three Rows of Table Data...
String [] alternateAccounts = new String[4];
for(int j = 0; j < alternateAccounts.length; j++) // Each Alternate Accounts i.e combobox has 4 items..
alternateAccounts[0] = "Tom";
alternateAccounts[0] = "Vic";
alternateAccounts[0] = "Tracy";
alternateAccounts[0] = "Andy";
altActCell[i] = new AltAccountComboBox(alternateAccounts,this.m_suballocTable);
} // End of adding Three Rows
altActColumn.setCellRenderer(new AltAccountTableCellRenderer());
if (viewIndex >= 0)
ComboBoxEditor altActCellEditor = new ComboBoxEditor(altActCell);
altActColumn.setCellEditor(altActCellEditor);
The CombBoxEditor code is...
ublic class ComboBoxEditor extends DefaultCellEditor
* Constructs a ComboBoxEditor that uses an array of items of type object.
* @param items - an array of items of type object
public JComboBox[] m_comboBox;
public ComboBoxEditor(JComboBox[] box)
super(box[0]);
m_comboBox = box;
for(int i = 0; i < box.length; i++)
m_comboBox.setEditable(false);
public Component getTableCellEditorComponent(JTable table, Object value, boolean isSelected, int row, int column)
if(row >= this.m_comboBox.length)
return super.getTableCellEditorComponent(table, value, isSelected, row, column);
return m_comboBox[row];
But when I click a Button (in a Panel) which adds a Row (with No values for the ComboBox ).. to the Jtable .. The Row Gets added fine.. but the JComboBox comes with Values from the First Row's ComboBox. I Don't want any Values in the JComboBox for the new added Row. Can someone tell me
how do I remove the Items from the ComboBox.
I will really appreciate for any help...
Thanks
-Pankaj

Hi ,
as per my opinion one approach would be that ,
you create a custom table region same as standard one using Jdeveloper and create other required fields also using jeveloper ,and then put this region in extend property of existing standard table region .
thanks
Pratap

Re:Adding a row in a matrix using Lost_Focus event & deleting a row

Dear All,
Iam facing a problem in adding a row in a matrix using last focus event.its like if i keep the cusor in the last coloumn in a matrix n if i press tab it should add a row .the row is getting added the problem here is the cursor is gng to first row but it should come to the second row.
the second problem is while deleting a row the row is getting deleted but the row count is showing the deleted row no.
pls suggest a solution for these problems.
Thanks & Regards
Anand

Hi,
If pVal.BeforeAction = False Then
            Select Case pVal.EventType
                Case SAPbouiCOM.BoEventTypes.et_KEY_DOWN
                    If pVal.ItemUID = "matlab" And pVal.ColUID = "mtimeout" And pVal.CharPressed = 9 Then
                        oMatrix = oForm.Items.Item("matlab").Specific
                        Dim rc As Integer = oMatrix.VisualRowCount
                        If rc = pVal.Row Then
                            addrow()    'funtion for adding row
                            oMatrix.Columns.Item("labc").Cells.Item(oMatrix.RowCount).Click()
                            'SBO_Application.MessageBox(oMatrix.RowCount)
                        End If
                    End If
This is the function i hav used
Private Sub addrow()
        Try
            If (oForm.UniqueID = "updt") Then
                oForm = SBO_Application.Forms.ActiveForm
                oForm = SBO_Application.Forms.Item("updt")
                omatrix = oForm.Items.Item("matlab").Specific
                omatrix.AddRow(1, omatrix.VisualRowCount)
                Dim rc As Integer = omatrix.VisualRowCount
                'SBO_Application.MessageBox(rc)
                otext1 = omatrix.Columns.Item("mdatein").Cells.Item(rc).Specific
                otext1.String = "s" 'RecSet.Fields.Item("date1").Value
                otext1 = omatrix.Columns.Item("mdateout").Cells.Item(rc).Specific
                otext1.String = "s" 'RecSet.Fields.Item("date1").Value
                End If
        Catch ex As Exception
            SBO_Application.MessageBox(ex.Message)
        End Try
    End Sub
this is the code which m using
Regards,
Anand

Can iOS Numbers copy formulas when adding new rows?

iOS Numbers table add row is not copying previous cell formulas. Is this supported or not?
I have a table with lots of columns and all of them have formulas. When I click at the lower left of the table to add a row, none of the new cells have the formulas. I have to manually go through every column and copy the formulas to the new row.
This is not very practical if you're planning to use Numbers on the go with an iPad. In my case, I have to quickly get a new row ready as needed. I was hoping there is a preference setting somewhere like "copy formulas when adding new row".

I had the same issue with the added twist that I wanted to reference the created cells in formulas in other sheets. This is what works for me:
I use a form to enter data. The referenced sheet is set up like this:
1     Name     Date     ServPayment    SalesPayment     Total
2     Week1                                                                 =sum (ServPayment,SalesPayment)
3                                                                                =sum (ServPayment,SalesPayment)
4     TotWeek1                                                            =sum (Total2,Total3)
"Total" sums the 2 Payments, TotWeek1 sums the totals.
In the entry form I never add data to the empty line. In this example, I would start at "Week1" and tap the "+" to add a new form. This creates the line in the referenced sheet with my formulas. As I continue, I always start at the last entry I have made and tap "+".
When I create a line that does not have the formula on either side, I do not get the formula.
Hope this helps.

Null Pointer Exception When Adding New Row on Table

Hello JheadStart Team
I have used detail group with table layout , when I am clicking on AddRow button on detail table , I encounter NulllPointer Exception . I have traced the code and fount that in JhsCollectionModel when adding new row following
condition occurs :
DCIteratorBinding ib = getRangeBinding().getIteratorBinding();
int rangeSize = ib.getRangeSize();
int rowsInRange = ib.getAllRowsInRange().length;
because getAllRowsInRange is Null then the error raise.
My JheadStart ver is 10.1.3.3.85 .
Detail Group with table layout setting is :
Use Table range=true
Show New Row at top=true
New Rows:empty
Show Add New Row Button :true
Regards

Given the build you are using, I assume you are an Oracle employee.
Is this correct? if so, please post your question to the [email protected] mailing list.
Steven Davelaar,
JHeadstart team.

Adding/deleting rows from a treeTable with a read-only view object

Hello --
I'm getting a JBO-25016 error when I go to delete a row from a treeTable. I want to create the hierarchy from a stored procedure, have the user add and remove nodes without calling back to the database. I will iterate through the tree and see what has changed and made the necessary updates on the database manually.
What is the correct method for adding/removing rows form the UI component?
Thanks!
Tom

Thank you, Amit! That did the trick.
Edited by: Tom on Apr 28, 2011 11:51 AM

How to default the value of a selectOneChoice when adding a row to a table

I have a table where one of the fields is a selectOneChoice. When adding a row to the table, the new row to be added displays the selectoneChoice field blank. I would like to have this field default to a specific value within the selectoneChoice when clicking the add button. Any suggestion on the code I need to add in the backing bean? Thanks in advance.

After some studying I figured out how to do this... code below for anyone interested:
DCIteratorBinding dcib = (DCIteratorBinding) bindings.get("someIterator");
RowSetIterator iter = dcib.getRowSetIterator();
Row newRow = iter.createRow();
newRow.setAttribute("yourFieldName",fieldDefaultValue);
iter.insertRowAtRangeIndex(0, newRow);
iter.closeRowSetIterator();

EDIT method doesn't work after adding new row

I would like to start editing after adding new row into TableView.
I copied example from Oracle website: [Using JavaFX UI Controls - 13 Table View|http://docs.oracle.com/javafx/2/ui_controls/table-view.htm#CJAGDAHE]. Then I put additional button for adding new row and define action for the button.
    final Button addButton = new Button("Add");
    addButton.setOnAction(new EventHandler<ActionEvent>() {
        @Override
        public void handle(ActionEvent arg0) {
            Person p = new Person("", "", "");
            table.getItems().add(p);
            table.getSelectionModel().select(p);
            table.edit(table.getSelectionModel().getSelectedIndex(), table.getColumns().get(2));
    });In result I can see selected new row but the table doesn't start edditing in the third column.
I have similar method for editing existing rows and it works properly.
    final Button editButton = new Button("Edit");
    editButton.setOnAction(new EventHandler<ActionEvent>() {
        @Override
        public void handle(ActionEvent arg0) {
            table.edit(table.getSelectionModel().getSelectedIndex(), table.getColumns().get(2));
    });Could you help me what I do wrong?

Try wrapping the setCaretPosition(...) method in a SwingUtilities.invokeLater(...)
caret=outputArea.getDocument().getText(0,outputArea.getDocument().getLength()).length();Should be:
caret = outputArea.getDocument().getLength();

How to refresh the grid so that default values come on adding new row.

Hi Experts,
In alv grid while adding new row, i want some 2-3 column values to come by default from already existing row in grid.
i am getting new row in internal table with 2-3 default values and rest columns blank on adding new row in alv grid
but the entire row is coming blank, not able to get the default values in new row
how can i refresh the grid so that default values come on adding new row.
thanks

Hi Surabhi,
Use this in Interactive section even if you are doing simple ALV.
DATA:
lv_ref_grid TYPE REF TO cl_gui_alv_grid.
CLEAR : gv_tcode.
*-- to ensure that only new processed data is displayed
IF lv_ref_grid IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = lv_ref_grid.
ENDIF.
IF NOT lv_ref_grid IS INITIAL.
CALL METHOD lv_ref_grid->check_changed_data.
ENDIF.
THis will solve your problem.
Regards,
Vijay

Generating Indiex for dynamically added table rows in HRFORMS

Hi ,
We are developing Payslip in HRFORMS by copying standard form.
We have got one business scenario which requires a table rows needs to generated dynamically to populate the retro values in the form.
We could able to generate the table rows dynamically by below command in HRFORMs scripts.
Table1.Row.InstanceManager.addInstance(1) but it is not generating with correct index.
Please help in adding table rows dynamically at specified index.
Regards,
akula

You can do that with 2 differents ways :
by creating a colomn key which is the concatenation of the key for each lin
by using field groups
I think you have to use the second one.
[sample by help|http://help.sap.com/saphelp_nw70/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm]
In this case you can put dynamiquely what are you wanted in your keys.
Regards,
Christophe.

I manually added two rows in error. How do i delete them?

Help, I manually added two rows, but cannot find out how to delete them without deleting all the responses!

Hi;
You can delete a single, or multiple rows in the Response Table by clicking on the row (or selecting multiple rows by clicking on the first row and then Shift+Click on the last row you want to select) and either using the right click context menu item "Delete Row/s" or clicking the arrow that appears when you mouse over the left side of the row/s and selecting "Delete Row/s" from the menu:
Thanks,
Josh

Disable users from adding-deleting row/columns

we are running sharepoint 2010 and I would like to setup some type of persmission that will disable certain users from adding-deleting rows/columns.
any suggestions will be appreciated
thank you

Each list in sharepoint can be assigned certain roles.YOu can break the inheritance for that list and assign a group as a new role to the list.The users belonging to that group will only have access to that list depending to what permissions you give that
group.The code goes something like this:
SPWeb web = (SPWeb)properties.Feature.Parent;
string ListName = "C";
SPList list = web.Lists[ListName];
            list.BreakRoleInheritance(true);
string GroupName = "Owners";
SPGroup group = web.SiteGroups[GroupName];
SPGroupCollection removeGroups = web.SiteGroups;
foreach (SPGroup removeGroup
in removeGroups)
if(removeGroup.Name != GroupName)
SPPrincipal principal = (SPPrincipal)removeGroup;
                    list.RoleAssignments.Remove(principal);
SPRoleDefinition rDefination = web.RoleDefinitions.GetByType(SPRoleType.Administrator);
SPRoleAssignment rAssignment =
new SPRoleAssignment(group);
            rAssignment.RoleDefinitionBindings.Add(rDefination);
            list.RoleAssignments.Add(rAssignment);
            list.Update();

Adding new row to the reports list page

How can I add a new report row in the reports list of the reports tab.
Ex: a new row to the report "users by Date of Join report" is to be added
How can we add Please help me out in this

I am facing the same problem!
camickr wrote:
Try adding an empty row containing a null value for the String instead of the empty String.camickr, it will not help, the DefaultRowSorter in the "*+compare(int model1, int model2)+*" method return -1 if the first value is null and 1 if the sacond value is null. and incase of DESCENDING it mult by -1.
                // Treat nulls as < then non-null
                if (v1 == null) {
                    if (v2 == null) {
                        result = 0;
                    } else {
                        result = -1;
                } else if (v2 == null) {
                    result = 1;
                } else {
                    result = sortComparators[counter].compare(v1, v2);
                if (sortOrder == SortOrder.DESCENDING) {
                    result *= -1;
                }And this is the real problem!
The empty line is sorted as the smallest value and incase of DESCENDING it will be the first line (because of the mult by -1).
We could have overide it and incase of the empty row(usualy the last row) do not mult by -1 in DESCENDING mode.
But the problem is that the "+*compare*+" method and it's caller "*+Row+*" inner class are private :-(
It is not wise to do it but we can do like kmp83 wrote:
kmp83 wrote:
copy/duplicate "private" code from DefaultRowSorter into my extended class.Anyone have another suggestion?

HT201280 adding a row

Similar Messages

Maybe you are looking for