HT201328 01 *********65 3 i have to unlock my iphone n this is my serial num anyone can help

01 **********65 3 i have to unlock my iphone n this is my serial num anyone can help
<Edited by Host>

Only the carrier the device is locked to can authorize the unlock of your phone. Contact them.

Similar Messages

I am trying to install new os x in to my iMac but it says this disk is locked is anyone can help me to unlock the disk

i am trying to install new os x in to my iMac but it says this disk is locked is anyone can help me to unlock the disk

Launch the Terminal app, copy & paste this command into the window that pops up, and hit the return key. At the Password: prompt, carefully enter your admin password, since nothing shows up on the screen, and hit the return key.
sudo chflags 0 /Volumes/
Then, copy & paste these next two, one at time, into the window and hit the return key after each:
sudo chmod a+rx /Volumes/*
killall Finder
Quit the Terminal app and try installing again.

I have misplaced my ipod 4th gen. It has no battery or find my ipod isn't on I'm not 100% it doesn't have wifi but I don't think it does. If anyone can help I will be very great full. Thank you.

I have misplaced my ipod 4th gen. It has no battery or find my ipod isn't on I'm not 100% it doesn't have wifi but I don't think it does. If anyone can help I will be very great full. Thank you.

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

TS1702 GarageBand does not appear as purchased. I still have my receipt/order number when I purchased it. Anyone can help?

When I try to check the applications in Purchased, GarageBand does not appear even though I purchased it before.
I also have the receipt number and order number for that transaction.
Anyone can help?

There is a very helpful reply already posted:
http://community.skype.com/t5/Skype-Number/Want-to-set-up-your-Online-Number-as-Caller-ID-go-here/m-...
the short answer is that you need to set up your Skype Number in the Caller ID feature - it's free.

I am using iphone 4 and planning to visit india for few months. can i buy local sim card from india and use in my iphone? i have alrady unlock my iphone.

I am using iphone 4 and planning to visit india for few months. can i buy local sim card from india and use in my iphone? i have alrady unlock my iphone.

Of course

I have a unlocked A1530 Iphone 5s that is not in English how do I get it to be ? Also it has a little dot you tap on that brings up 4 things help !

I have a unlocked A1530 Iphone 5s that is not in English how do I get it to be ? Also it has a little dot you tap on that brings up 4 things help !

Try this link to get the language changed:
iOS: How to change the language when it's set to one you don't understand - Apple Support
Best of luck!
GB

I have a unlocked sprint iphone 6, can i connect it to my existing line. I currently have a galaxy s5

i have a unlocked sprint iphone 6, can i connect it to my existing line. I currently have a galaxy s5

The AT&T, T-mobile, and Verizon iPhone 6 and 6 Plus are actually all the exact same phone and all have CDMA built in. I imagine Apple did this to simplify manufacturing and got a deal from Qualcomm to only get charged for the Verizon iPhones for the CDMA components which is probably all on the same chip now. That info is probably locked up so tight in a contract we may never know.
Anyway, it is true for multiple reports around:
not only is the iPhone 6 unlocked, but the t-mo... | Apple Support Communities
http://forums.macrumors.com/showthread.php?t=1784285
http://forums.macrumors.com/showthread.php?t=1789829
This is not true for any iPhone before the iPhone 6

In this report i have marked one line..if this width 30,i need to multiply by a number 0.3 and if the width =30,it multiplies by 0.37...how to use this logic here..??? anyone can help??

In this report i have marked one line..if this width < 30,i need to multiply by a number 0.3 and if the width >=30,it multiplies by 0.37...how to use this logic here..??? anyone can help??
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',
T3.ItemName as 'FG Item Name',
T2.PlannedQty as 'FG Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
0 as 'FG Pending Qty',
0 as 'FG Receipt Qty',
'' as 'Issue Item Code',
'' as 'Issue Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
0 as 'Issue Item - Return Quantity',
'' as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2
UNION ALL
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',
T3.ItemName as 'Item Name',
T2.PlannedQty as 'Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
(Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',
(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription order by T2.DocNum desc

Hi,
Try this:
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',T3.ItemName as 'FG Item Name',T2.PlannedQty as 'FG Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) <30 then ((T2.U_OD-T2.U_ID)/2) *0.3 end, 0 as 'FG Pending Qty',0 as 'FG Receipt Qty','' as 'Issue Item Code','' as 'Issue Item Name',Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',0 as 'Issue Item - Return Quantity','' as 'Return Doc No',SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntryINNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCodeLEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntryWHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2UNION ALL SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',T3.ItemName as 'Item Name',T2.PlannedQty as 'Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) >=30 then ((T2.U_OD-T2.U_ID)/2) *0.37 end, (Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry
where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,
T2.PlannedQty,T2.U_OD,
T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription
order by T2.DocNum desc
Thanks & Regards,
Nagarajan

In Lion, sometimes clicking on close button or tabs doesn't respond as if the buttons aren't there, i have to move the cursor away and move back to make them work again, anyone can help me?

I'm not sure if anyone had run into this issue. Clicking the same place on the display sevral times will cause the click to stop working. For example, if i open safari and click on the Show Reading List button, it will work the first time i click it, but stop responding to my command as i click more, as if the button is not there, i have to move away the cursor and click somewhere else and move back to click the button to make it work again. And it happened everywhere, not just the show reading list button. The scrolling and moving are normal.
In fact, I have my trackpad replaced in an apple store for this issue but it turned out this is not a hardware problem, and it is not only my problem. Ironically, i found the same issue on several of the demo Macs inside the apple store. So anyone can help me here? Thanks.

Hi manni394, what version of Firefox are you running now?
Firefox 22 has a new way of setting the default zoom level: it is based on your Windows font size setting. So, if you set Windows fonts to 125% (enlarged 25%), your Firefox pages also will be enlarged 25%. On pages that do not adjust their layout, you may get a horizontal scroll bar.
To reduce the zoom on a page, hold Ctrl and tap the - key (the one on the numeric keypad or the one on the number row of the keyboard). The zoom should be reduced for each tap.
If you want to globally adjust your zoom level to be lower, you can use either of these add-ons:
* [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level]
* [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint]
If you already have one of those add-ons, check the default/global zoom level in case it needs to be adjusted.

I have an ipod touch and it is disabled cause my cousin changed the password and forgot what it is so now it is stuck .. i connected it to the itunes but still the keypad didnt appear and couldnt remember the password.. anyone can help me ?

i have an ipod touch and it is disabled cause my cousin changed the password and forgot what it is so now it is stuck .. i connected it to the itunes but still the keypad didnt appear and couldnt remember the password.. anyone can help me ?

Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Downloaded IOS 7 and now I do not have a dictionary in iBook. This is very frustrating. What can be done to fix this issue?

Downloaded IOS 7 and now I do not have a dictionary in iBook. This is very frustrating. What can be done to fix this issue?

I've got to agree with Allan. It sounds like the hard drive is corrupt at least. It's possible it might be physically failing. Without backups, it's possible your data is already gone. You need a professional to help you.
If you do not have an Apple Store near you or simply don't have the time to spare, there are some things you can try, but you must understand that it's possible these things could make the chances of recovering your data worse than they already are. Perform the instructions to follow at your own risk!
First, you can try repairing your hard drive with Disk Utility. If that works, see if you can start up the machine. If you can, the very first thing you need to do is back up any data you don't want to lose. You may still need to take other steps, as your system may be damaged as well, but getting the data is the important part.
If Disk Utility cannot repair the problems, you can try DiskWarrior. It can repair problems that Disk Utility cannot. However, it also increases the risk of destroying your data if it fails. If it works and you can start up the machine, do the same as I advised for following success with Disk Utility.
If repairs (with either) were successful, but the machine still won't start up, you can try reinstalling the system. Hold down command-R at startup and then just install right on top of the existing system. If all goes well, you'll be able to start up afterwards and can get your data backed up. If all goes badly, it'll further decrease the chances of getting your data back.
If neither can repair the damage, you're in bad shape. You will need a professional to help you, unless you are willing to lose all your data.

I'm new at this but I am hoping someone can help me.I have recently been away for 5 weeks and my Tom Tom required updating.When I clicked to update it required a pc.As I didn't have access to a pc it wouldn't work is there any way to do this without a pc?

Hi, I'm new at this but I am hoping someone can help me.I have recently been away for 5 weeks and my Tom Tom required updating.When I clicked to update it, it required a pc. As I didn't have access to a pc it wouldn't work is there any way to do this without a pc? I was without this app for 3 weeks! Thanks, Lea

The process to update your Tom Tom is a big data file, you will need to be connected to a Wi-Fi network for it to download. If will take about an hour.

I have made many purchase on app but when i want to made an in-app purchase of a game, it appears "your purchase could not be completed". i have disabled the restriction already but it still doesn't work. anyone can give a hint or a hand here? cheers~~~

i have made many purchase on app but when i want to made an in-app purchase of a game, it appears "your purchase could not be completed". i have disabled the restriction already but it still doesn't work. anyone can give a hint or a hand here? cheers~~~

http://www.apple.com/support/itunes/contact/

Hello THIS IS RAZA I GOT A MACBOOK PRO I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks Screen Shot 2015-03-21 at 10.

Hello
THIS IS RAZA
I GOT A MACBOOK PRO
I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanks

This is a scam. Do not phone these people, at best they will charge you for unnecessary 'cleaning' and at worst they will gain access to your Mac and steal your data. You've probably managed to install some 'adware' which is producing this fake warning. 'Adwaremedic' should remove it and is safe to use - please see
http://www.adwaremedic.com/index.php

HT201328 01 *********65 3 i have to unlock my iphone n this is my serial num anyone can help

Similar Messages

Maybe you are looking for