HT201328 I am trying to get the unlock code from ATT

I am trying to get the unlock code from ATT for my Iphone 4S bought in an Apple store, and now they refused to give it, because it is reported as stolen.
I have all the invoices and recepts, .
How can I do to unlock the phone if they continue in their negative and hostile attitude???
Thanks,
Paul
[email protected]

hipichik Hello there. Let's get more specific information. What type of lock code are you referring to? And what are you looking to do with your phone?
SheritaH_VZW
Follow us on Twitter
@VZWSupport

Similar Messages

HT1937 HI i`ve been trying to get a unlock code from orange for over 2months with no joy,please can you help

Hi i`ve been trying to get a unlock code from orange for over 2months with no joy,please can you help

We're users here. We cannot help. You will continue to work with Orange.

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

HT1688 i got the unlock code from at&t but i don't know how to input the code on the phone to unlock the iphone 4s

i got the unlock code from at&t but i don't know how to input the code on the phone to unlock the iphone 4s

There is no "unlock code". If you legitimately unlocked your iPhone via ATT, you will get an email detaling the unlock process, which involves connecting to iTunes. Follow the directions in the email.
If you used one of those web sites that promise an magical "unlock code" you probably got scammed.

How can i get the source code from java concurrent program in R12

Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
Zulqarnain

user570667 wrote:
Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
ZulqarnainDid you see old threads for similar topic/discussion? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Source+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

I own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error. i am using copy and paste to prevent miss typing the code.

i own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error. i am using copy and paste to prevent miss typing the code.

Hi Lawrence,
Please try the steps mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html
Regards,
Rave

How do I get the java code from a class file ?

I want to know how to findout the java code from a .class file . Is there any utility or any way to get the java code from a .class file. If so , please let me know the step by step procedure .
Thanks
Shiva

Check out Mocha (http://www.brouhaha.com/~eric/computers/mocha.html)
It's free!

I lost all of my Itunes music because of an infection that required them to wipe my computer. I am trying to get the music back from multiple sources. What I have recovered is a mess. Albums are mixed or songs not grouped as album. Help?

My computer got infected with some terrible virus. I contacted the manufacturer and they said the only thing to do was wipe the whole thing. I could not back it up bec this mess?ause it would include the infection. I have been trying to recover the lost music from several different places. A friend tried to help me by putting all of his music on my computer from his external hard drive. That was very nice of him but now it is a terrible mess. The recovered songs are not grouped into albums correctly. Some albums are mixed - every other song is from the other album. Some songs are listed separately and not grouped as an album. I tried to ask iTunes to find album art work and it has been running that for over 48 hours. Is that possible? When I try to stop it I get a message that says I will lose all the data. I admit that I am not very tech. savvy and I really don't know what I am doing. It took me more than 20 years to make that collection and I am heart broken. Do you have any ideas about how I start to fix

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

How can i get the tax code from Condition record number

Hi all,
i have the Condition record number from which i have to get the tax code as i looked inthe KNOP that Condition record number there but no tax code is maintained there.
so is there any other way to find the tax code for particular Condition record number
Regards
suresh

hi suresh,
can u tell me the field name for condition record number and in which table it is stored.
because i knew one condition number which is stored in table EKKO and the field name is
KNUMV- Number of the document condition.
from ekko take relevant details and look for ekpo where u find the tax code
filed name of the tax code id MWSKZ- Tax on sales/purchases code

Just bought a laptop in store, now trying to get a promo code from best buy

I recently purchased a laptop in requirement with the new deal from microsoft offering a free xbox upon purchase of a PC of 699.99 or more. The guy in the store told me I needed to contact microsoft for the xbox, but microsoft says I need to get a promo code from best buy, help!

Best Buy is no longer participating in the xbox promo.
Crystal
Superuser
Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
*Remember to mark your questions solved and click the star to give kudos to show your thanks!*
While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
My opinions do not in any way shape or form represent Best Buy's Official decisions.

Trying to get the last row from a resultset

Hi,
I'm trying to do a query to postgreSQL and have it return the last updated value, (last row).
My prepared statement is returning the correct results, but i'm having a problem getting the latest value.
I'm using a comboBox to drive a textfield, to load the last entered values in depending on which item in the comboBox is selected.
I've tried a variety of things and most seem to return the first row, not showing the updated values.
Or, if it does work, it takes to long to load, and i get an error.
here is the working code;
Object m = machCBX.getSelectedItem():
try { PreparedStatment last = conn.prepareStatement("SELECT part, count FROM production WHERE machine = ?",
ResultSet.TYPE_SCROLL_INSENSITIVE, //tried both INSENSITIVE and SENSITIVE
ResultSet.CONCUR_READ_ONLY);
last.setString(1, String.valueOf(m));
rs. = last.executeQuery();
if(rs.isAfterLast) == false ) {
rs.afterLast();
while(rs.previous()) {
String p = rs.getString("part");
int c = rs.getInt("count");
partJTX.setText(p);
countJTX.setText(c);
}this grabs values, but they are not the last entered values.
Now if i try to use rs.last() it returns the value i'm looking for but takes to long, and i get:
Exception in thread "AWT-EventQueue-0" java.lang.OutOfMemoryError: Java heap space I also know using ra.last() isn't the best way to go.
I'm just wondering if there is another way other than getting into vectors and row count? or am i better off to go with the later?
thanks
-PD

OK, you've got a major misunderstanding...
The relational database model is built on the storage of sets - UNORDERED sets. In other words, when you hand a database a SELECT statement without an ORDER BY clause, the database is free to return the results in any order.
Now it so happens that most databases will happen to return data retrieved by an unordered SELECT, at least for a while, in the same order that it was inserted, especially if no UPDATE or DELETE activity has occured, and no database maintenance has occured. However, eventually most tables have some operation that creates a "space" in the underlying storage, or causes a row to expand and have to be moved or extended, or something. Then the database will start returning unordered results in a different order. If you (or other people) never ever ever UPDATE or DELETE a table, then on some databases the data might well come out in insertion order for a very very long time; given human nature and the way projects tend to work, relying on that is a sucker's bet, IMHO.
In other words, if you want the "most recent" something, you need to store a timestamp with your data. (With some databases, you might be able to take advantage of some non-standard feature to get "last updates" or "row change timestamps", but I know of no such for Postgres.
While this won't solve your major problem, above, your issue with rs.last is probably occuring because Postgres by default will prefetch your entire ResultSet. Use Statement.setFetchSize() to change that (PreparedStatement inherits the method, of course).

Trying to get the 1st character from an int

Hello all,
Ill try to make this as easy to explain as possible.
I want to get the 1st number of the int that the person enters
so for example: 100
then i want to get 1
200
then 2
and so on...
Here is the code so far. It works, but i just dont know where to get it from and i need it to be able system.println it.
Once again, thank you.
package bars;
public class Employee {
// class constants
// Data fields
private String custName;
private String custAddress;
private double rate;
private int custID;
private double steve;
public Employee(int id, String name, String adress, double ra) {
custName = name;
custAddress = adress;
rate = ra;
custID = id;
public String toString() {
return "Customer ID: "+ custID + "Customer Name : " + custName +
"Customer Adrress" + custAddress + "rate: $" + rate ;
public int getBalls(){
return custID;
public String getBallsy(){
return custAddress;
public double getRate(){
return rate;
the other one...
package bars;
import javax.swing.JOptionPane;
import javax.swing.*;
import java.util.*;
public class EmployeeApp {
//methods
private static int readInt (String prompt){
String numStr = JOptionPane.showInputDialog(prompt);
return Integer.parseInt(numStr);
private static double readDouble (String prompt){
String numStr = JOptionPane.showInputDialog(prompt);
return Double.parseDouble(numStr);
public static void main (String[] args){
//read and store the payroll data in an employee object
Vector programmers = new Vector();
for (int i = 0; i < 1; i++) {
Employee programmer =
new Employee(
readInt("Enter Customer ID: "),
JOptionPane.showInputDialog("Name: " ),
JOptionPane.showInputDialog("Address: "),
readDouble ("Enter hourly rate: ")
int steve = programmer.getBalls();
int bob = steve;
programmers.add(programmer);
System.out.println("here: " + steve);
System.out.println(programmers.toString());

I am not sure what you want, but this method will return the left digig.
public int getLd(int n)
if (n > 10) return(getLd(n/10));
else return(n);
}Noah

I am trying to get the verification code to be able to send photo emails and i don't seem to be able to get the CODE.

I need help getting my photo email set up. I keep getting a message to type in the verification code that was sent to me in an email.. I have three emails but no code number. Can someone help me with this

Errors 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

I have received the unlocking approval from ATT 4 days ago. Why I still can't unlock it now??

How could this happen????

You would have to ask AT&T....
What happens when you restore the phone in iTunes? Are you not getting the "Contratulations, your iPhone is unlocked" message?
Are you getting an error?
What is the error?
Was the phone hacked to unlock it, or jailbroken before you requested a legitimate unlock?

I just received my new phone from Verizon, I turned it on and followed direction for set up...now I lost my connection with ATT....How do I get the service back from ATT...not due to change until the 16th

I just received my new 6 from Verizon by mail. I was not due to change carriers til the 16th, but I turned on the new phone and did the set up...now I lost ATT. How do I get the ATT carrier back on my old phone?

I just received my new 6 from Verizon by mail. I was not due to change carriers til the 16th, but I turned on the new phone and did the set up...now I lost ATT. How do I get the ATT carrier back on my old phone?

HT201328 I am trying to get the unlock code from ATT

Similar Messages

Maybe you are looking for