HT201343 If you have a Mac Pro and want to use airplay, this work great with an apple TV set up!
http://airparrot.com/download/Mac/AirParrot.dmg
Now like my iOS and MacBook Air I can use apple tv on my Mac Pro tower! Try before you buy!
Yes count your self lucky. AirPlay is extremely failure prone and very aggravating to most users. Espeically if you do not have EXTREMELY high end networking hard ware if you are using WiFi. If you insist on going down this road you can look into an app called AirPariot. It might let you use AirPlay..... but again I wouldn't
Similar Messages
-
I have a mac osx and want to use a magic jack without the computer on all the time.
I am trying to use a magic jack plus without plugging into my mac. (It will work plugged directly into the computer but I bought it so I would not have to keep my mac on all the time to use the phone).
What do I need to get a separate modem. I am on air port express (an old one)It appears that Magic Jack installs software on your system that it needs to run. Look at some of the threads in "More Like This" on the righthand side of this page or look here:
http://www.voipreview.org/review/magicjack -
I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?
download the installation files and install using your serial number or adobe id,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
We have 2 Mac Pros and 4 Xserve Raids-
I have 2 Mac Pros and 4 Xserve Raids and want to do a quick fix. I want to hook them all to gather so we can share assets for Final Cut Pro. We have a Fiber Switch and tons of cable. I know that I can’t work on the same project file as the other machine. but can we use the same assets? And will the drives just mount to both of our machines if I just connect them all to the Fiber Switch?
We are planning on an Xsan later this year just not any time to do it.
Oh and a little off subject but can an Xserve Raid mount through the Gigabit connection? I want to connect a couple of laptops to edit some XDCAM video at 35Mbs a sec. Or will I have to wait till we put the Xsan in? Or do all the machines hooked though the Xsan have to be Fiber Channel?
thanx for any help,
Dan.+I have 2 Mac Pros and 4 Xserve Raids and want to do a quick fix. I want to hook them all to gather so we can share assets for Final Cut Pro.+
You can do this but you're begging for trouble. Really. It could be possible to mount shares as read-only on one machine and writable on the other and at least make resources available but if you really want to do this then a SAN is what you want/need. If you're in too much of a rush to implement a proper SAN system you're also in too much of a rush to reproduce a project file or replace a source file that has been corrupted and lost because someone clicked on the wrong thing. Think about it.
+Oh and a little off subject but can an Xserve Raid mount through the Gigabit connection?+
If you're running server you can share out over ether as remote mount via afp or smb but I don't think this is what you're asking. Fibre is the only way to directly mount a drive directly to the desktop and edit video from it if that's what you mean.
+Or do all the machines hooked though the Xsan have to be Fiber Channel?+
XSAN is also *fibre only*. Ether is packeted and out of order and has latency and a bunch of other problems as a streamed data delivery system. You need fibre.
HTH,
=Tod -
I have a Mac Pro and it seems to have a malware. How can I remove it
I have a Mac Pro and seems like it has a malware, adware . How can i remove it. MACkeeper keeps on popping
You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?
RE: SATA Bus speed:
Typical Rotating drives available today, whatever their SATA spec, can source data off the spinning platters no faster than about 125MBytes/sec.
SATA 3 is rated at 6G bits/sec, which theoretically is about 750 Mega Bytes/sec
SATA 2 is rated at 3G bits/sec, which is theoretically about 375 Mega Bytes/sec
SATA 1 is rated at 1.5G bits/sec, which is theoretically about 187.5 Meg Bytes/sec
None of the SATA Busses is a bottleneck for consumer Rotating drives you can buy today. Trying to speed up the SATA Bus will not provide any real-world performance increases for Rotating Drives.
https://discussions.apple.com/message/22690384 -
I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?
Thanks roaminggnome. Can I do that transfer wirelessly or do I have to get a large jump drive to copy and transfer. I presume that I cannot use my iPod right?
-
I have a MAC PRO and a MAC AIR all dedicated to the same I cloud/Itunes account. i purchased i photo on the air but can i install it on the PRO free as i have already paid for it on my account?
Yes if your system minimum reguirements for hardware and software
LN -
I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)
I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)
-
I have downloaded MAMP for Mac and want to use it for working with Wordpress. I'm on an Imac with Maverick OS 10.9. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!
It depends on how you installed it. You have to shutdown the MySQL service first. If you used the standard, but obsolete Startup Item, you can do that with the Startup Item. If you created a launchd script, you can do it with launchctl. Once MySQL is no longer running, you can delete the Startup Item or launchd script and the rest of MySQL.
-
How can i stream(air mirroring) *.mkv files between Mac Pro and AppleTV2 by using quicktimeX?
How can i stream(air mirroring) *.mkv files between Mac Pro and AppleTV2 by using quicktimeX?
Need support!How can i stream(air mirroring) *.mkv files between Mac Pro and AppleTV2 by using quicktimeX?
As stated you can't. Even if the compressed data is TV compatible, the container is not. If the file is playback compatible with the QT X Player, you can, of course, play the file on your main system and "mirror" its display to the TV. Unfortunately, this normally means only the video is played back via the TV device. On the other hand, if you convert the MKV content to an TV compatible file (or move the compressed data to an TV compatible container if the data is already TV compatible), then you can mirror the QT X player (with audio) to the TV device in the full screen mode, air play/mirror it from iTunes (or any mobile device), or stream it directly from itunes.
Basically, what you can do here depends on the compressed data in the MKV file container and how you define "mirroring." -
I have a Macbook Pro and want to take the Hard drive back to as it was the day I purchased it.
Hi, I have a Macbook Pro and want to take the Hard drive back to as it was the day I purchased it, It came preloaded with Lion so no disk, how can I do this so I can sell it without any of my personal data on it.
Thanks
PaulWhat operating system are you using?
OS 10.7.2
What model/vintage/year is it?
Macbook Pro 17" 2011
Do you have the original OS X install DVD disc that came with the computer?
It came preloaded so no disk -
I have an old MACBook and want to use it as an external drive to load disks on to my new mac. How do I?
Apple makes a Thunderbolt to Firewire adaptor if your new computer does not have a Firewire port.
-
I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?
1. Remove the drives, install them in external enclosures.
2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire -
I had an HP laptop. Just bought a Mac Pro and want to get my music and photos moved over. Can't I just open my I tunes in my new laptop and then connect my Iphone or I pod and sync my music into my I tunes?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Maybe you are looking for
-
MB1C Intial Stock posting error
Hi Gurus, When i am doing MB1C intial stock posting i got a error " G/L Account 39999 does not exist in Company Code 9999".... Give me suggestion... Thanks in Advance Ravikumar Talluri
-
Dynamic selection of records based on checkbox checked
Hello, I want to select a list of records from a multirecord block by using the checkbox checked values as the criterion and use the records selected in the where clause for querying in another forms. The data from the multirecord block is from a que
-
Security in essbase at the database level
i need to edit users ability to access various databases within an application in essbase. the user has been provisioned in shared services to the app, but, it appears to further restrict particular databases, that has to be done in essbase. right? i
-
3D graph plot properties - cannot be changed
Hi all, I still cannot change the plot properties of the 3D graph. I open the Plot Properties tab up and it gets stuck on the first page. This means that I cannot release any VIs which use the 3D graph - a big problem. Has anyone else experience thi
-
when i am trying to start the listener i am getting the following error. LSNRCTL>start listener TNS-12560 TNS protocol Adapter error No such file or directory error. Let me know the sloution for this problem please. OS is windows sever 2000 Database