HT201699 My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?
My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?
Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work
Similar Messages
-
We just had our modume replace and I am now trying to print on my HP Office Jet Pro
Hello mariamac80,
It sounds like you cannot print from your network printer on your MacBook. Printer issues can be a but tough to nail down, but I would recommend trying the troubleshooting in this article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.
Return, cancel, or exchange an Adobe order
-
I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.
Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print -
Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?
The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
(photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
Did you ever have cs2 installed on this particular computer before?
If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
You'll need to use the non activation version of cs2 from here and the supplied serial number:
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products -
I have an ipod shuffle 1st generation. it will work ousing usb port in car or on computer but i can not get it to play using headphones. what would be the reason for this.
Sorry for the typos, I hope my message still gets across!
-
I have an ut ipad 2 with no configuration for the i cloud. I have follow the instructions of synch the ipad with itunes v 10.6 in my pc, but i can not get the display of the cloud icon in the general settings of the ipad. appreciate any help
I'm asking because ios5 introduced iCloud. You have to have updated to ios5 to see it.
-
I have the Sony Erickson Experia X10 phone with Android 2.6 running on it. My phone is listed in the compatible phones list, but I can not get it to locate the app, nor can I get it to download. I have tried from the browser, the market app and even android.com's site. I can find the mobile app on the android.com market site (via my laptop) but it insists that it is not compatible with my phone. I love my FF and want the continuity this would provide. Please help!!
There is no version 2.6 of Android. If you are using Android 1.6, then you will need to update your phone to Android 2.0 or later before you can install Firefox.
To check which version of Android you have, open the "Settings" app, then choose "About phone" and look for "Android version." -
On my iPhone 4 I can play music through the speaker or headphones, but I can not get audio in phone mode! I can hear anything through the ear piece or via a headphone. Nor can people hear me when I call. I must be doing something wrong, but what?
Hello Angela,
Thank you for the details of the issue you are experiencing with sound on your iPhone. I recommend the following steps for an issue like this:
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
You can find the full article here:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Airport Exopress light is solid green, but I can not get on the internet. Does anyone have a suggestion how to fix this?
Would you please provide some more information about your current network so that we can help you? For example, is your AirPort Express the only router in your current network configuration? That is, is it connected directly to a broadband modem or to another router upstream of it? Regardless, what is the make & model of this modem?
When changing network equipment or when setting it up for the first time, it is always a good idea to perform a completer power recycle of your networking equipment. Please check out the following AirPort User Tip for the details. -
I want to put all my music onto an external hard drive. But I can't get it to put music on my itunes. The music list is completely empty and so is my IPOD. How do I do this? I have a PC with Windows.
You say the music is not on the external HD, the music list (iTunes?) is empty, and it is not on the iPOd. Then where is the music you want to move to the external HD?
You can redownlaod iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have photoshop on my mac book but I can not get it to update thru my creative cloud
I have photoshop on my mac book but can not get it to update thru creative cloud installer any idea's everything else has updated but i can not get the latest version of photoshop cs6 update
Try Photoshop's Help menu > Updates
Gene -
I have purchased Itunes Match, and go to Settings/Music and it tells me to subcribe to Itunes Match. I click on that and it says I am subscribed, but I can not get it to quit playing ADs. I have rebooted.. Nothing seems to work.
Any ideas
Message was edited by: BobTheInspector
Figured it out. Must sign out from Itunes and then back in and it works.Welcome to the Apple Community.
You cannot use iCloud.com on a mobile device, only on a computer. Documents in iCloud are available via the apps themselves on a mobile device. -
I Updated my iphone 4 to iOS 6 but I can't get Siri to start by holding down the home key... Am I missing something? I thought Siri is included in iOS 6!
Siri is available on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Cellular data charges may apply.
-
Hi there. A common question but I can not get any of our iphone/touch/pad to be recognised as a device on itunes on a PC with XP. ANy quick solutions?
jrburrows wrote:
Ok, fair enough. But since Job's death - Apple's control on leaks has been terrible. I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones. Because of the vast ammount of leaks. With the iPad mini leaks, it's 99% sure to come out next week.
Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
Amd by "others" I meant other people on iPads - not other devices/manufacturers. It's possible to do so, I just want to know how. I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
No, USB is not the future, you missed the memo about cloud and wireless computing?
Maybe you are looking for
-
What does this message mean and how can I avoid it?
This computer's local hostname "joseph-santos-computer-4.local" is already in use on this network. The name has been changed to "joseph-santos-computer-5.local".
-
** Production Deployment Topologies ... **
Hi all, I've been reading up on Coherence deployment topologies and would like some assistance on the best practice for deployment into a Production environment. In production deployments, what are the recommended deployment best practices: I underst
-
So I need to create empty applet, with smallest size. import java.applet.Applet; public class EmptyApplet extends Applet public void init() }After compiling its size about 2KB is any chanses to increase its size?
-
Image Does Not Show Up in Downloads
Hey everyone- My podcast can be found at: https://itunes.apple.com/us/podcast/core-training-for-distance/id826714987 (I am still working on some of the meta tags...) My question is this. My image shows up fine in the iTunes store. However, when you g
-
Printing comment in reader 8.0
I am a long time reader but first time post. I have done plenty of search on this and found the solution but just need to clarify one thing. I was able to print comments in reader 8.0 via editing the registry. When it does print, it prints out the co