HT202157 After the upgrade, my Apple TV pretends to connect the HDMI to a USB connector...
After the upgrade, my Apple TV pretends to connect the HDMI to a USB connector...
Thanks !!!
I didn't notice that there is a micro usb connector in the back of the Apple TV.
I thought according to the message in the screen of the Apple, it was a connection between the HDMI and a computer with USB an iTunes.
My next step if to find a USB to MICRO USB cable...
Similar Messages
-
I needed to upgrade my iTunes to register and sync a iPhone 5c. I upgraded by Apple Software and finally was able to download the upgraded iTunes. When I try to start iTunes I get this message, "The file iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. How can I repair this?
If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
HT202157 After the latest update I no longer get Netflix
After the latest apple tv update I no longer amable to open Netflix. Any ideas? Already tried reboot
I had already attempted that. After a day with no changes I finally reset the apple tv to factory settings. I of course had to reload all my personal settings, IDs password etc. Netflix works again. Must be an issue apple has with the latest upgrade that added History channnel, A & E along with a few others.
-
How to connect an external monitor to macbook pro. The monitor has no usb connecter, only a port.
Most MacBook Pro models have a Mini DVI port, a Mini DisplayPort or a ThunderBolt port for connecting an external display. USB does not have enough bandwidth to support a responsive display connection.
What model MacBook Pro do you have, by year, CPU speed or MacBook Pro 3.1 designation? -
G5 PowerBook; Intel cpu; recently upgraded 10.3.9 to 10.5.8 also upgraded to iLife6. After several downloads suggested from Apple, iMovie6 is a mess. Clip indicator runs 3 clips ahead of the sound and video. Jerky. Unusable. All the movies were created with iMovie 4 and loaded all into this version and saved all in this version.
Video card is GeForce FX 5200; Quartz Extreme: Supported: Core Image: Hardware Excelerated.
Perhaps in the multiple downloads, Apple sent me a version that outruns my aged video card?
Help is most appreciatedThe uptime of your Mac is more than 10 days. How about a simple reboot?
-
How do I get my contacts back after an upgrade on apple?
Okay so I have an iphone 4 and I was doing an upgrade on my computer through apple and after restoration, I've lost all my contacts. How do I get them back?
Did you do a manual backup first?
Do you have them backed up on iCloud?
Are they synced to some outside service such as GMail? -
I paid all this money for apple tv and purchased the tv shows and now i can't watch them. please advise.
Hi I have an apple tv 2. I don't recall the last time I updated, but I was always advised against it. I was turning on apple tv but had tv on wrong output and I guess I accidently hit update. It says not to unplug or turn off, so I went ahead and let it update. I have a collection of old movies that I owned before RedBox came out, so I downloaded them to my itunes library. Now a lot of my newer movies will not show up on my playlists. Movies that were there before. Anyone know what happened, but better yet, please tell me there is a way to undue this new update? PLEASE!
I know it's not the internet connection, because I can go to my computer and airplay it to the apple tv with no problem. But this will be such a pain. -
Updates completed on my devices and the airplay seems to have stopped. Can not get either of my i pads or phones to airplay. Any suggestions?
Troubleshoot the network connection. AirPlay requires that the iDevices and ATV be on the same network.
-
Lost apple store icon after ios7 upgrade on apple configurator
anyone else seeing this issue? running Configurator 1.4!
Hi NevisIPAD,
Did you install any configuration profiles? Sounds like the restriction for "Allow installing apps" is unchecked. When that box is unchecked, the App Store disappears. Fix the restriction and you should be good to go.
Hope this answers your question!
~Joe -
After 2.4 update, Apple TV no longer connects to 5 Ghz network
Hi,
I have a dual-band AirPort Extreme with 2 networks. One 802.11n only 5 Ghz, the other the slower speed. I used to have the Apple TV connected to the 5 Ghz network and it worked fine. But now it won't pick up an IP address on that network. I have to connect to the slower network now.
Is there any remedy to this? When connected to the 5 Ghz network, Apple TV just gets a self assigned IP address. I even tried manually assigning an IP address and that didn't work. It just wasn't able to connect to the Internet.
I also recently updated the AirPort to 7.4.2.
Thanks,
BrendanI had this when I updated to 7.4.1 and solved it by changing the channel from automatic to manual and selecting 44
The reason for this is that my TC was bought in the US and my MBP in the UK where there are slightly different frequencies used. Thus, my MBP (UK) wasn't able to see the channel that the TC had selected. Changing this sorted it out.
This was at 5GHz
To change the channel, select your Airport extreme in airport utility, then manual setup. In summary, click on the channel word, which takes you to the wireless config. If you can't select anything other than automatic, then press alt and click automatic and you should be able to manually select a channel.
Hope that this helps -
Please give me the name of the connector for the laptop. Is it a "display port"?
Note that you'll find two alternatives: one that has a TB plug at one end and a little box with a female HDMI jack at the other or a cable that has male TB and HDMI plugs at both ends. First one gives you the flexibility of using a standard HDMI cable of whatever length you need, at an extra cost. Second simplifies things and eliminates one connection (and possible point of failure), but may limit how far away you can place the computer from the display.
-
after I upgrad my iphon 4s, iTunes logo appears with a picture of USB cord when I turn on the power.please please help
I had this same problem when I tried to update. It locked up during the update. Your phone is in recovery mode. The only way I could restore my phone was to connect to a different computer and ask it to restore my phone. It worked and thanks to the fact that I had backed everything up to the iCloud before updating, everything is back to normal. I won't be updating to IOS 6.2.1 again. I had also updated iTunes and now whenever it starts it gives me an error message -42110 and doesn't recognize my Iphone when it's connected. Hopefully, Apple will fix this soon. Good luck.
-
No TV (xawtv) after Xfree86 upgrade (fixed?)
Upgraded to new xfree-4.4.0-1.
Now I can't fire up my TV card using xawtv
Terminal output is:
This is xawtv-3.91, running on Linux/i686 (2.6.3-P4v.2)
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 144 (GLX)
Minor opcode of failed request: 5 (X_GLXMakeCurrent)
Serial number of failed request: 268
Current serial number in output stream: 268
I think it has something to do with {maybe??} the ttf-bitstream-vera font thingy :?: :?:
Any help is much appreciated
Thanks,
slyski
I think I fixed it.
I was reluctant to upgrade to the 2.6.5 kernel after the 2.6.4 usb hotplug errors.
But I went ahead anyway and the hotplug errors aren't there and the TV (xawtv) works OK now.
GO FIGURE
slyskiThanks for the reply Xentac,
Since it started working again after the 2.6.5 upgrade I didn't check the command
line thing anymore.
Since I seen another post about this I investigated again and the error about the font
is still there:
This is xawtv-3.91, running on Linux/i686 (2.6.5-P4v.1)
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
but at least it works now.
Thanks,
slyski -
On upgrading iPhone 4 to ios 6 using iTunes, it returned an unknown error then froze completely with the iTunes icon and USB connector on the screen. Reset didn't work. iTunes doesn't recognize the devise anymore.
if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.
-
When will Apple fix the Yosemite connection problems with Bluetooth and USB?
Since my Yosemite upgrade, my Apple mouse disconnects randomly - with increasing frequency, and my USB port does not connect properly with devices that used to work just fine. Is there a way to reverse Yosemite?
Re: how do i downgrade my OS for my macbook pro
Maybe you are looking for
-
GUI_DOWNLOAD - Column Width
Hi all, I have a requirement to use gui download but im having problem in its column width, i want the excel to have a column width same as the title of the column, is this possible (to have different column width in the output excel file) Thanks.
-
Yeah I am looking to buy the book Adobe Illustrator Cs6 Classroom In A Book by Kordes Adobe Creative Team and all others....is there a blunk price I can get them somewhere.
-
Hello, I am implementing OSS note 725170, I pasted the content of the note at the bottom of this message. As per the note I created the class CX_BSP_WD_HTTP_RESPONSE_ERROR with superclass CX_NO_CHECK. Instead of selecting the 'Installation = 3
-
Price will be negative - CKM3N
I run de material ledger but apear this error in one material. What can i do? FLAVIA Errors During Price Determination: Price will be negative
-
Hellow all, I have 2 Tables 1) Employee 2) Category Employee Table Structure 1)emp_id 2)emp_name Category Table Structure 1)Category_id 2)Category_name I Need in Form when I enter Employee id = first 2 Digit which is 01,02,03 as on 99 For Example Emp