HT203434 what  does it  mean when i  connect to  recharge and a microphone appears with lightening   sign just  above  it?

what does it mean  when i  turn on my mini wi fi i pad and it shws  a microphone and  lightening  coming out  from it  and  nothing  else is able to be brought up??

I think that you are seeing the lightning bolt and the lightning connector on the screen. That means that you have to plug the iPad into a wall socket using the power adapter becuse the battery is too low to charge using your computer.
Look at the photos on this website and not the one under the Connect to Power heading.
Charge the battery in your iPad - Apple Support

Similar Messages

  • What does it mean when the ipod is diabled and says connect to iTunes

    what does it mean when the ipod is diabled and says connect to iTunes

    It means...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • What does it mean when starting up, all you get is an envelope with a question mark in it?

    what does it mean when starting up, all you get is an envelope with a question mark in it?

    You should reinstall OS X. See the following for reinstalling instructions for Lion/Mountain Lion or Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • What does it mean when I log into Facebook and a pop-up comes out saying "[JavaScript Application] Error: jQuery("#fb_menu_account a", document).attr("href") is undefined"?

    What does it mean when I log into Facebook and a pop-up comes out saying "[JavaScript Application] Error: jQuery("#fb_menu_account a", document).attr("href") is undefined"? I would like to know what I can do to fix this. The site ends-up running slow. I have tried clearing the cookies and cache, but that doesn't work.
    == URL of affected sites ==
    http://www.facebook.com

    Does is still happen in Firefox Safe Mode. See [[Safe Mode]].
    If so, it's probably being caused by an add-on.

  • What does it mean when I start my computer and there is a file folder with a question mark?

    What does it mean if I start my computer and there is a file folder with a question mark blinking?

    That Disk 1/ Mac OS is the install DVD not the hard drive. Your hard drive is not recognized which would mean it's probably dead.
    For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
    Or OWC  http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
    Here are video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
    Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
    If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • What does it mean when trying to startup I get a grey screen with a box with a question mark flashing

    My wife was getting the circling pinwheel so she shut down her MacBook Pro. When she started it back up we got the flashing box with a qestion mark in it. It will do that for a while then shut off.
    Any suggestions?

    It usually is a sign that the MBP cannot locate the OSX.  Either the HDD needs attention or the connection to the HDD has failed.  You will need the original installation disks to address the HDD for repair or if you MBP came with Lion or later, boot to the recovery partition and see if the HDD can be repaired.
    Ciao.
    Use this link as an aid in resolving the problem:
    https://discussions.apple.com/docs/DOC-5281
    Message was edited by: OGELTHORPE

  • What does it mean when your iphone wakes up and shows a message saying "Your SIM sent a text message"?

    This message appears at least 5 times a day, my carrier is from Peru. Does anyone knows if it's normal or how to stop it?
    Thanks!

    A red check means the text wasn't sent (maybe the number has been changed, they have texts blocked, there was a network problem).

  • What does it mean when you get an Apple and a grey status bar during start up of a MacBook Pro?

    When I start up my MacBook Pro I get an Apple icon and a grey status bar.  Some days the start up goes really fast and other days it takes a few minutes for the computer to start up.  My laptop never used to do this.  It started a month ago.  Is there something I should do to resolve this?  Below are my computers spec's:
    OS X Yosemite V 10.10.1
    MacBook Pro (15-in, 2.53GHz, Mid 2009)
    Processor: 2.53GHz Intel Core 2 Duo
    Memory 4 GB 1067 MHz DDR3
    Start up Macintosh HD
    Any help someone can provide me would be greatly appreciated.  Thank you in advance!!

    The boot progress bar with progress bar with a dark background is a new feature for Yosemite and appears for seconds before the desktop loads. It is normal that "some days it goes really fast".   Yosemite is heavier than Mavericks and as a result  the boot time is slightly longer. On Mavericks it was a little wheel that spun, now it is a progress bar.

  • What does it mean when ipone has white screen and constantly vibrating

    My iphone is turning on and off then constantly vibrates whats the problem

    Sounds as if it got wet. If so, it's pretty much done. But, have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

  • Hey what does it mean when i charge my ipod and its on the battery screen and it turns to the apple screen then it turns off and it just keeps repeatedly doing it

    it doesnt seem to wanna charge i just got it its an 8 gb black ipod with the camera on both sides

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1689 WHAT DOES IT MEAN WHEN I RECEIVED A PHONE CALL AND 3 NAMES CAME UP AS THE CALLER

    what does it mean when i received a call and 3 names came up as the caller

    Could mean that you have three different contact entries with the same phone number.

  • HT4199 What does it mean when I click on my wifi name and the bars come up but the network keeps thinking and the ipad says safari cannot open the page because it is not connected to the internet. ?

    What does it mean when I click on my wifi name and it show I'm on my wifi, but the network keeps thinking and the ipad says, Safari cannot open this page because it is not connected to the internet. ?

    When you click on the WiFi network name, have you also provided the password for accessing the network?  You should get a dialogue box asking you for the security information the first time you connect.
    If you are not able to connect, you might want to go to Settings > General > Reset > Reset network settings.
    Then go back to Settings > WiFi and select your network name again and make sure the security information is now entered correctly.
    If you still cannot connect, power down the router, wait a few minutes, power up the router, with the iPad powered down the whole time, and after the router has had several minutes to stabilize power up the iPad.  See if it now connects correctly.

  • What does it mean when my ipad is in Recovery mode? It's connected to my imac for software update and it says I must "restore" the ipad before itunes can be used. Will I lose everything on my ipad?

    What does it mean when my ipad is in Recovery mode? It's connected to my imac for software update and it says I must "restore" the ipad before itunes can be used. Will I lose everything on my ipad?

    Unless you have a backup from which you can restore, yes you will lose all of your data and settings.
    You should be able to sync your content back to the iPad if you have been syncing with iTunes all along. If you don't sync with iTunes, you can download much of your paid content again for free as long as you use the same Apple ID. This explains downloading past purchases.
    http://support.apple.com/kb/ht2519
    Unfortunately, at this point, you must restore the device before you can move on. There is nothing you can do to avoid it now.

  • What does it mean when I keep getting the following message:  Cannot open Page:  Safari could not open the page because the server stopped responding"  I have it connected to my wifi, have 3 strong bars,but the circle just keeps going around.

    What does it mean when I keep getting the following message on my IPad2:

    Usually it's because you are not making internet connection via wifi.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • What does it mean when it said SIM not provisioned , my iPad 3 is not connect with wifi

    What does it mean when it said SIM is not provisioned , my ipad3 is not connect to wifi , Please help

    Does your iPad 3 have a SIM slot?
    Does it have a SIM in it?
    Has your SIM been activated by a cellular carrier?
    It sounds as if your iPad, which as you say is not connected to WiFi, is trying to connect to the internet but failing.

Maybe you are looking for

  • Moving to Uk and Need help with Voltage Issue

    Hi I recently (less then a month) bought a new Intel based iMac (17/1.83/512/160/COMBO/AP-USA) with built in iSight, and now I am moving to UK for a year. I want to take my iMac with me. Can someone help me with true answer on how to solve the voltag

  • Inserting RFC Response to Tracking table using JDBC as a receiver

    Hi All I want to update my tracking table with the RFC response but the problem is I cant figure out he Target structure on my JDBC. Every time when testing on my http://xxxxxx:50000/mdt/channelmonitorservlet I get nothing on the  "Processing Details

  • Context Problem when using Use One As Many

    Hi SapGuru's. i have got a requirement in an IDOC To File Interface where the segments in the IDOC are like E1LFA1M->E1LFM1M->E1WYT3M THE Test data is like below <?xml version="1.0" encoding="UTF-8"?> <ns0:IDOC_Test_Mt xmlns:ns0="urn:sap.shoprite.co.

  • EvalScript() not returning in Fireworks with setDocumentImageSize()

    I have had an issue with building an extension for Fireworks (CS6). The issue is that when certain commands are run in the JSX file, evalScript() never gets a return value. The problematic functions are these: - setDocumentImageSize() - setDocumentCa

  • Upload material using idoc in lsmw

    hi , i m trying to upload material using idoc inbound processing in lsmw. but whnever i m giving partner name as lsmw & port name as lsmw (even i tried with different name also ).  it gives error like port does not exits. regards, swapnil