HT204053 imported local ICS files will not upload to iCloud
Although I follow the instructions in http://support.apple.com/kb/HT4967 (iCloud: Manually Importing data....) there is no way iCloud will reflect the changes on my MacBook after I import each ICS file into the iCloud account. I am running ML. I tried several times both with iCloud calendard sync on and off (in system preferences) with no success.
I am really annoyed at iCloud and the mess it has created with my Mac Calenders and Notes. There is no wat to push from the Mac to the Cloud, rather than the cloud overriding every device??
I found my own answer following two main steps:
1. Follow these instructions for the calendars you want on iCloud from today onwards. Its tedious but it works in the end.
http://support.apple.com/kb/TS4337?viewlocale=en_US
Article: TS4337 --- iCloud: Advanced Calendar and iCal troubleshooting
2. Follow this tip for any other calendars you want to access but not on iCloud (e.g. archived calendars of old clients, projects, etc.)
https://discussions.apple.com/thread/4146260?start=15&tstart=0
essentially only disable the iCloud account from inside Calendars preferences,
and start importing calendars. When you enable again iCloud (from Calendars perefences) you will have both sets (looking as 2 accounts)
Similar Messages
-
File will not upload, what to do
file will not upload, what to do
Hi John,
There is a size limit of 10GB for ExportPDF.
It also may depend on what type of document it was prior to being converted to PDF. Are there pictures or was it scanned? Are you trying to convert it to Excel or Word?
If you would like, I can take a look at the document to see what I can do? If so you are welcome to email it to me directly: [email protected]
Looking forward to hearing back from you!
Kind regards, Stacy -
IMovie WILL NOT upload to iCloud Drive
For some reason my iMovie App on my Macbook will not upload the videos to the cloud. I make a lot of videos for myself, my friends and for youtube, and i really need them to backup and they won't show up in iCloud Drive. I have checked the iCloud Drive settings and iMovie is checked and I have tried uploading it through the iMovie folder in iCloud website in the iDrive files and it won't work because it says the files must be in a format iMovie can open. I have also tried doing it through the iDrive folders on my Macbook and it still won't work. What is going on? Is my macbook broken, or something?
Looks like this has been solved by yesterdays IOS8 update - thanks!
-
IPhone 4s Notes Will Not Upload to iCloud?
I have my @me account set up on the iPhone 4s and "Notes" will not upload to the cloud.
I was able to get contacts, calenders, reminders and mail, but Notes is empty?I think I found the problem. My iPhone Notes has multiple accounts, and I did not know this.
The choice in Notes is;
All Notes
From My Mac
iCloud
The notes on my iPhone are under the "From My Mac" section, the iCloud account has no notes.
How do I transfer the Notes on my iPhone that are in the "From My Mac" section to the iCloud section? -
Photos will not upload to iCloud in iPhoto can anyone help?
I am unable to upload photos from my events to my icloud photostream. I have reset the photostream and I still show "uploading X photos" in upper right of iphoto window while in the icloud tab in iphoto. photos will not upload. I am also unable to move pictures into icloud on any of my devices. (iphone 5 & 2nd gen ipad) will appreciate any and all help to cure my photostream problem. Thank you.
Hi,
The set up is quite basic, actually extremely basic. I am just using my mac and an iPad to play notes on and using the installed synths that came with the program.
I have 17 different tracks on this piece of music with some of them using the same noise on multiple tracks to play diffent riffs.
If I try and open a new track with let's say for exame the standard piano. Try to record a part. It plays though the system but will not record even though the timing no is red.
I can send you a screen shot later today if needed. My other optioni think is to copy all of the parts into a new project and start again.
Thanks for your time. -
I am connected to my server but files will not upload
Help! Dreamweaver CS5 is telling me my files upload - successful - but they do not change on the internet.
I cannot figure out why this is happening as it was working before. Yes I"m plugged in, yes I I'm 'refreshing' the browser. Will not work in Chrome or IE.
Help!
Thank you.
NancyHello Nancy,
it's well known, that in all these cases you describe I'm not a friend of a detailed troubleshooting. To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable. -
I am trying to import an excel file ... see below. It appears if you select both Tasks and Assignments tables it will not allow you to do this, says file is not in a project recognized format. So I import Tasks tab first then run the
wizard again and import the assignments tab while selecting merge with project option. This works with one exception:
If there are more than one assignment per task. It does not merge in the 2nd assignment, only the first.
Is there a way to import a task with 2 or more assignments?
Background
To figure out what the format for the file needed to be, I started with a MPP file and from project saved as Excel and selected the "Project Template" file. Now I am trying to import that XLS to see how it works
ID
Active
Task Mode
Name
Duration
Start
Finish
Predecessors
Outline Level
1
Yes
Auto Scheduled
DS001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
1
2
Yes
Auto Scheduled
MT001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
2
3
Yes
Auto Scheduled
CT001
1 day
June 17, 2014 8:00 AM
June 17, 2014 5:00 PM
3
4
Yes
Auto Scheduled
CT002
2 days
June 18, 2014 8:00 AM
June 19, 2014 5:00 PM
3
3
5
Yes
Auto Scheduled
DS002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
1
6
Yes
Auto Scheduled
MT002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
2
7
Yes
Auto Scheduled
CT003
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
4
3
Task Name
Resource Name
% Work Complete
Work
Units
CT001
Engineer1
0
8h
100%
CT002
Engineer2
0
16h
100%
CT003
Engineer1
0
8h
100%
CT003
Engineer2
0
8h
100%
Andrew PayzeAndrew,
I did a quick test using your example although I didn't include the Predecessor or Outline Level fields to keep things a little simpler. I imported the Excel data into a new Project file with a single import of task and assignment data. It is very important
to set up the Excel Workbook correctly. On Sheet 1 I entered the task data (Name, Duration, Start). I did not include the ID or finish date as that is redundant - Project generates its own ID and will calculate the finish date based on the start date and duration.
On Sheet 2 I entered the assignment data basically just as you show it except I didn't include the Units.
The data imported as expected.
John -
I have page documents showing an arrow in the upper left coner of the document icon, but they never have uploaded to iCloud. What am I missing?
If you are able to move the document to your desktop on your Mac, you should do so. Then delete all references to that document in the iCloud on your mobile devices, at iCloud.com and if necessary from system preferences> iCloud> manage.
Once you are sure it has been removed from all locations, try adding it back using a slightly different filename, from your desktop. -
ITunes Song File Will Not Upload To iTunes Match/Cloud
I have two song files that are failing to upload. Both files play fine. I have tried creating new AAC files. I have reimported the files from the CD using error check. I have turned off iTunes match and turned it back on, I have deauthorized the computer and reauthorized it. Other files on the CD imported correctly and uploaded. I have tried adding both files one at a time. One file is 6 MB and one file is 4.5 MB.
iTunes Match gets to step of uploading the file, hesitates, stops and restarts the process. Thanks for any suggestions,
KenHi,
These are 2 song files imported from 2 CDs using iTunes as AAC MP4 files. All the other songs on the 2 CDs have uploaded to the iTunes Match cloud with no problems.
Importing one of the songs as MP3 (4.5 MB became 4.1 MB) worked. However, when I repeated the process with the second problem file, iTunes Match again fails at the upload step. Seems to be random, but your suggestion worked for one out of two.
Thanks. Can anyone think of anything else to try?
Ken -
I have to upload a scanned receipt to a website and I get the error message "connection was reset". I have uploaded these receipt for two years and last week I have had to use another browser to complete this operation. I connect to the website and do the report I must do, but I can no longer upload to this site.
Are you using any additional software for the uploading?
Try using Firefox in [[safe mode]] when you upload. There is no need to make changes when you see the option. Disable all plugins whilst in safe mode. Then try the uploads.
You mention [/questions/921993 elsethread] that it is a work site. Have you contacted your IT department. One possibility is that the site is not recognising Firefox 10.
(One temporary workaround and troubleshhooting test would be to install Firefox3.6.27 [http://portableapps.com/news/2012-02-01_-_firefox_portable_3.6.26_released portable] as an additional browser and try that.) -
Photos not uploading to iCloud Photo Library from Photos beta
I have been trying for a couple of weeks now to upload photos from my Mac to the iCloud Photo Library using the new Photos beta. I have about 2,800 photos and the upload process just stalls with about 2,000 photos left to upload.
I've tried turning the upload on and off and rebuilding the library but nothing works. A couple of times when restarting the upload process I have received this error message:
Referenced files will not upload to iCloud Photo Library
Select referenced files in your library and choose “Consolidate” from the File menu to copy the original files into the library.
So I gather I'm supposed to select a few files and consolidate them, but I have no idea what the "referenced" files are. Might anyone know?
thanks!We aren't allowed to discuss beta software in this forum according to the hosts. Try the Developers forum.
-
My Pages file is 731mg It contains 5999 words, and five slideshows. iWorks gives 1GB of space which I have available to use. My file will not upload to iWorks with the message: 'Not enough space.' Why?
racer4ever wrote:
My Pages file is 731mg It contains 5999 words, and five slideshows. iWorks gives 1GB of space which I have available to use. My file will not upload to iWorks with the message: 'Not enough space.' Why?
If your file is 731 mBytes on HD it may be highly larger when it is expanded.
Yesterdays I built a doc for my grandson with 12 pictures.
On disk, the file is using 901 Kbytes.
When I open it, the Ram used by Pages jump from 84 Mbytes to 104 Mbytes which means that the used Ram is about 20 times the file size.
I made the same test with a document containing only text. It's 2.7 Mbytes on disk and use 20Mbytes in Ram too.
So, what is surprising isn't that you are unable to open it, it's how you created it. I assume that you were using an other machine.
Yvan KOENIG (VALLAURIS, France) vendredi 23 septembre 2011 21:42:04
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
Index.htm will NOT upload . . . desperate : /
This is my own site which I've run for 3 years. Same
computer, same program, didn't touch site set up, firewalls or
anything. This morning I make a few quick text changes to the
homepage and the file will not upload. It has in fact wiped out my
entire homepage because once it did kind of upload but some "files
were skipped during the operation". Yeah. Some files. Like, all of
them. (
http://www.ExchangeHJ.com)
The error is "no response from server" However, I created
this file:
http://www.exchangehj.com/test.html
and it uploaded just fine.
I can also connect to other sites on different servers and
upload fine.
It appears to be just index.htm. I have tried to change the
name to default.html, still will not upload
(Made switch to CS3 last year so all newer files are html and
old files are htm, has never caused a problem as long as the links
are right everywhere)
Please, any ideas? This is a online company web site, a blank
homepage is not okay. And it's killing my saturday . . . I just
wanted to post a quick note to the site :(
The rest of the site is still there:
http://www.exchangehj.com/equineMarketing.htm
If you try to go to home page from there you get Page Not
Found (it calls specifically for index.htm)
If you just type site url it come up blank.
help. thank you.Talk to your host. Quickly.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"daazlin" <[email protected]> wrote in
message
news:g5aq4r$e1b$[email protected]..
> This is my own site which I've run for 3 years. Same
computer, same
> program,
> didn't touch site set up, firewalls or anything. This
morning I make a few
> quick text changes to the homepage and the file will not
upload. It has in
> fact
> wiped out my entire homepage because once it did kind of
upload but some
> "files
> were skipped during the operation". Yeah. Some files.
Like, all of them.
> (
http://www.ExchangeHJ.com)
>
> The error is "no response from server" However, I
created this file:
>
http://www.exchangehj.com/test.html
and it uploaded just fine.
>
> I can also connect to other sites on different servers
and upload fine.
>
> It appears to be just index.htm. I have tried to change
the name to
> default.html, still will not upload
> (Made switch to CS3 last year so all newer files are
html and old files
> are
> htm, has never caused a problem as long as the links are
right everywhere)
>
> Please, any ideas? This is a online company web site, a
blank homepage is
> not
> okay. And it's killing my saturday . . . I just wanted
to post a quick
> note to
> the site :(
>
> The rest of the site is still there:
>
http://www.exchangehj.com/equineMarketing.htm
> If you try to go to home page from there you get Page
Not Found (it calls
> specifically for index.htm)
> If you just type site url it come up blank.
>
> help. thank you.
> -
Documents are not uploading to iCloud from Pages
All software is up to date. On OSX 10.9.1 I am only having this issue on my MBP. Documents are uploading to iCloud from my phone just fine. I had edited a document and it continues to just say "Waiting" and doesnt upload any changes. I also started a new document and saved it but it will not upload to iCloud, so I can not access it on the phone. I am not sure if this is a glitch from the most current Pages update. Is anyone else having this issue? Is there a fix for this issue?
Unfortunately neither of those options work. Last thing I did was reinstall Pages and it is exactly the same. Unfortunately now it will not appear in the Launchpad and I have to keep it in my dock. Having such a horrible day with this. I do not understand why Apple charges us so much for their hardware and then forces us to use things like iCloud, because they restrict the full benefits of things like Dropbox or Skydrive, when they cant have it working properly. I have read other posts on here with similar issues or even worse off.
I greatly appreciate your help Winston. I think I will have to contact Apple now, I am just hoping it ends up being a simple fix. -
Photo will not upload new photos from same camera that always worked in IPhoto. Says "could not be uploaded )may be unrecognized file type or files may not contain valid data). Help!
Try image capture or a card reader - after the photos are safely on your Mac then use the camera's format command to reformat the memory card
LN
Maybe you are looking for
-
How can I put a mathematically if - formula in a field of a pdf - form?
Hello together, I am absolutely unexperienced with JavaScript. I have to implement formulas into a Form. In one field I have to add field a and b - but the result should be displayed only, if the result is positiv. In the next field the result has to
-
Host command, change directory where it opens command prompt
I'm using the HOST command to host out to the command prompt. What I want to know is how to change the directory that the command prompt opens up at. I want it to open up at the c:\ but instead it's opening up at in the forms60 path where forms is in
-
Delete signatures in Adobe X (Password issues)
A few months ago I was having problems with Adobe so it was deactivated and re-installed. I'm assuming this is why I'm having issues now, however, I was able to sign until now. I am unable to sign any documents due to "password incorrect". I did not
-
Any ideas?
-
Labview and engine dyno (newbie)
I am totally new to labview. I recently purchased various parts from a "Mustang" automotive engine dyno. I got the eddy current unit, the load cells, and shaft encoders. I was unable to get the control unit and a/d cards for the computer so I am rese