HT204135 I have a MacBook Air and bought a Canon MP495 printer scanner with WiFI. Since the Mac gas no disk drive and had to down load the printer, scanner drivers and a navigation and network software from Canon's website. How do I get the software to wo

I have down loaded printer,scanner drivers and 2 applications Navigator and Network from Canon's website. I cannot seem to get these to run althought the printer works when connected to the Mac with a LAN cable Canon's documentation is useless because it relies on downloading a disc which you cannot do without a CD drive that MacBook Air does not have. Any suggestions appreciated.

Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen

Similar Messages

  • I just installed the latest version of iTunes to get the updates and new software on my iPod but it hasn't updated my iPod or put any of the new software on there either.  How to I get the software to sync onto my iPod?

    I just installed the latest version of iTunes to get the updates and new software on my iPod but it hasn't updated my iPod or put any of the new software on there either.  How to I get the software to sync onto my iPod?

    Are you sure it's not 6.1.6?  If it is, that is the latest iOS version that will work on a 4th generation iPod Touch.  Later versions require a 5G iPod which has twice as much RAM.

  • I got a new iphone 6.  When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup.  How do I get the most recent backup onto my new phone?

    I got a new iphone 6.  When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup.  How do I get the most recent backup onto my new phone?

    Hello, Anita.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are wanting to restore your new iPhone 6 from an iPhone 5 backup.  This sounds like the iOS version of your old iPhone 5 may be newer than what was installed on your iPhone 6.  Try going through the steps in the article below.  
    iOS: Unable to restore from backup of a newer device
    I would also check to see the backup dates in iTunes and if the  backup is located on iCloud instead of iTunes.  
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
    Cheers, 
    Jason H.  

  • My podcasts do not show the pictures only the sound when I import them to iTunes from Garage Band.  How do I get the pictures to show up in iTunes?

    My podcasts do not show the pictures only the sound when I import them to iTunes from Garage Band.  How do I get the pictures to show up in iTunes?

    Well, all I can tell you is that if your file is an m4a with chapter markers, those markers having suitably sized images attached, and you drag it into the Music area of iTunes (so that it appears as a song) in List view, when you play it and then command-click on the small image in the header (next to the progress bar) you should see your embedded images.
    If this isn't happening the best place to ask would be in the GarageBand forum: my own experience of GB is rather out of date and in any case I've never used it for podcasting.

  • Why do songs keep duplicating in my Library. One song has duplicated five times. If  I delete the unwanted duplicates will it delete the song entirely from my library? How do I get the four unwanted duplicates out of my library?

    Why do songs keep duplicating in my library. One song has duplicated five times. I have many that have duplicated up to 3 times. How do I get the duplicates  out of the library without removing the song completely?

    As above, Apple's official advice on duplicates is here... HT2905: How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
    The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
    tt2

  • If I buy music from my iPOD touch, how do I get the music into iTunes also for backup on CD?

    If I buy music from iTunes using my ipod touch instead of the computer, how do I get the music into iTunes also so that I can back it up on CD?

    File>Transfer Purchases

  • HT201364 I have a macbook air 1.1 --- maverick update wont install  -- isnt this a late 2008 mac air?

    How do I figure out whether my MacBook Air can run with OS X Maverick? I think its a late 2008 MacBook Air, but the installer wont allow me to install.
    Thx,
    flying gorilla
    odel Name:          MacBook Air
      Model Identifier:          MacBookAir1,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          1.6 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          4 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MBA11.00BB.B03
      SMC Version (system):          1.23f20
      Serial Number (system):          W8813CU6Y51
      Hardware UUID:          71716D67-B5FC-50DC-8CB5-DF2A06EEA879
      Sudden Motion Sensor:
      State:          Enabled
      System Version: Mac OS X 10.6.8 (10K549)
      Kernel Version: Darwin 10.8.0
      Boot Volume: Macintosh HD
      Boot Mode: Normal
      Secure Virtual Memory: Enabled
      64-bit Kernel and Extensions: No
      Time since boot: 10 minutes

    No, it's the very first MBA. Max OS X is 10.7.5. A Late 2008 MBA is 2,1.
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    A. Upgrading to Mountain Lion or Mavericks
    To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    B. Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Changed my Apple ID and my iMessages have disappeared from my iPad. How do I get the same messages back again?

    I have recently changed my Apple ID (wish I didn't as it's causing nothing else but issues so far) and my iMessages have disappeared from my iPad. I have signed out / signed in with the new account but it doesn't work. How do I get to see the same messages on my iPad again as the ones on my iPhone?

    Hello, see if this might be it...
    I think you accidentally hit CMD+Option+8, do it again, or open System Preferencess>Universal Access>Seeing & turn Zoom OFF.

  • Macbook air 2011 so slow speed to visit Internet with WIFI

    I bought Mac book air 2011 13' inch core i5 last week. Recently, I found it is sooooo slow to visit
    internet with WIFI, even I cannot open the any website with Safari..........
    Is there anyone the same to me?????

    Hi,
    i solved the problem this way,
    first reset PRAM (google for "reset PRAM lion" if you don't know how = restart and immediately push these buttons simultanously  [option] [cmd] [P] [R] )
    then
    in network prefs, uncheck "ask for confirmation when connecting to other networks"
    (or something of that kind, i don't use the english version)
    this solved my problem
    hope it will help you as well
    give peace a chance

  • I have a 3G iPhone and have changed my email which I use an an ID.  it is changed on my iTunes (PC) but the old email/ID still appears on my 3G iPhone so I cannot update my Apps..........how do I get the iPhone to accept the new ID??

    I have a 3G iPhone and have changed my email and Apple ID on my laptop/iTunes account.
    How do I get this new ID to show on my 3G iPhone.
    I still have the old ID and cannot update my Apps.
    PLEASE HELP !!
    thanks, Nosuh

    Did you purchase or download the apps with your old ID?  Apps are tied to the ID that is was purchased from.
    If it is a new app you bought with your new ID, you can go into settings - appstore- apple id and then log out.

  • Purchased Elements 10 Editor from Apple App Store, how do I get the Organiser component?

    I purchased Elements 10 Editor through the Apple App Store on my iMac not realizing that it did not include the Organizer component.  How do I go about getting the Organizer component?

      Purchases from Apple are stand alone apps. The Organizer is only available with the boxed product or downloads direct from Adobe.
     

  • On my laptop running windows 7 most of the information has disappeared from the window - headings (file, edit, view, etc), address bar and navigation buttons - all i can see is tabs - how do i get the missing items to display

    On my laptop running windows 7 all the info displayed at the top of the homepage window is missing. All headings, i. e. File, Edit View, etc. are gone. There is no address bar. There is no home button, refresh button, etc. My wife was using the machine when it happened so I don't know what she did. How do I restore these features?

    F11 did not work F10 did. ThaNK YOU FOR THE HELP

  • HT1727 My old computer is dead, but I copied many of my CDs on to it, and I assumed into my iTunes library.  A lot of the songs are on my shuffle, and many of the CDs are lost/scratched/just plain gone from my life.  How do I get the songs on the new lapt

    Why are these songs not all in the magical musical cloud?

    follow the steps given here...
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • HT4623 I have ios 5.1 and according to my ipad there are no ios updates but yet there are apps I would like to use that require 6.0 or later.  how do i get the most recent ios 7.0.3?

    how and where do I the the latest IOS for IPAD!!!

    Fredronalderman wrote:
    there are apps I would like to use that require 6.0 or later.  how do i get the most recent ios 7.0.3?
    Finding iOS Apps Compatible with Older Devices
    App Store: Downloading Older Versions of Apps

  • I have a macbook air/ipad/phone, etc.  I use my macbook for my home business and bought a TC.  My husband does not want it to be our default wifi.  Does it have to be?

    I have a macbook air/ipad/phone, etc.  I use my macbook for my home business and bought a TC to do backups.  My husband does not want it to be our default wifi/modem as he is exclusively a PC user.  Does it have to be?  I thought it did everything wirelessly??  I don't want to start disconnecting our modem/router etc as we are all set up with wireless printing and backups for that computer.  If I have to muck around with it I am thinking of not bothering??

    The TC will connect to your existing modem/router using an Ethernet cable. You will not have to use the wireless on the TC....you can even turn it off if you wish.
    Backups to the TC will occur over your existing wireless.
    Connect from a LAN <-> port on the modem/router to the WAN "O" port on the TC. Locate the TC anywhere that the Ethernet cable will reach. You can run the cable up to 300 feet with no loss.
    Things will not automatically configure themselves. You will have to do some mucking around....no more than you would if you were installing the TC anywhere else.
    Configure the TC to "create a wireless network". Once it is setup, you can ignore the TC wireless, or turn it off.

Maybe you are looking for

  • Date Stamping Photos

    I am newbie to Lightroom but am quickly loving this program.  One of the issues that led me here is date stamping.  Our dSLR does not allow for date stamping (Nikon D40x).  What it does is retains the "capture date" in the metadata ( i beliee most ca

  • How do I create a .llb file that includes only the subVIs used in a VI?

    hi.... can anybody help me ...i wanna creat a library file that holds only the sub-VIs that are running in particular main VI . are there options for that in labview??

  • Struts controller classes and ADF in JDeveloper 10.1.3 EA

    I've noticed that ADF Struts has changed quite a bit from JDev 10.1.2. In the previous version of ADF Struts, the default data action class was oracle.adf.controller.struts.actions.DataForwardAction. In version 2 of ADF Struts, the default action cla

  • Macros in Numbers in iOS

    The same basic question has been asked numerous times over recent years for iWorks/Numbers on OS X/iOS:  "Can you use macros?"  The answer is always "No." In my case, it's the current version of Numbers for iOS 7. Would some then explain how the temp

  • IPhone 4 shuts off randomly, will only turn on after hard boot, then shuts back off within 10 minutes

    My iphone 4 just had its 30 pin port replaced and also i believe the battery was just replaced. It will only turn on with a hard start (Holding the wake/sleep + Home) then within the next 10 minutes it shuts back off. I have been trying to recovery m