HT204216 What is the comparable feature to the snap feature of window 7?

how do you do that?

OS X does not have that feature, but there are a couple of third-party utilities that will add it. For notebooks I'd recommend BetterTouchTool

Similar Messages

  • I wonder to know what is the enterprise solution for windows and application event log management and analyzer

    Hi
    I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
    I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
    I Want to know the point of view of Microsoft expert and give me their experience and solutions.
    thanks in advance.

    Consider MS System Center 2012.
    Rgds

  • What is the earliest version of Windows that you support.  I tried to download a trial of Photoshop and XP is no longer supported.

    What is the earliest version of Windows supprted?

    You're welcome.  For more detail, see:  System requirements | Photoshop
    -Noel

  • What is the difference between Constant Window, Variable Window,Main Window

    hello all
    what is the difference between 1) Constant Window
                                                2) Variable Window
                                                3) Main Window   in SAP SCRIPT

    Hi,
    Window Types
    When defining a form window, you must select a window type for the window.
    You can choose between three types:
    Constant Windows (CONST)
    Variable Windows (VAR)
    Main Windows (MAIN)
    Constant Windows (CONST)
    Starting with Release 4.0, the system internally processes windows of type CONST similar to windows of type VAR.
    Therefore, if you create a new window, always use type VAR.
    Variable Windows (VAR) 
    The contents of variable windows is processed again for each page, on which the window appears.
    The system outputs only as much text as fits into the window. Text exceeding the window size is truncated;
    the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different form pages.
    As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike.
    The only difference is that constant windows have the same size throughout the form.
    Main Windows (MAIN) 
    Each form must have one window of type MAIN. Such a window is called the main window of the form.
    For SAPscript forms, the main window has a central meaning:
    It controls the page break.
    It contains the text body that may cover several pages.
    It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
    As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to
    output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the form.
    The SAPscript composer thus avoids reformatting of the text after each page break.
    If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page.
    This page must not call itself as subsequent page (recursive call), since this would produce an endless loop.
    In such a case, SAPscript terminates the output after three subsequent pages.
    For printing header lines or totals, the different output areas of the main window are of special importance.
    go through this links:
    In Scripts Variable window and constant wind difference?
    Main Window
    Re: Main Window in SAP Script
    What is the difference between Constant window and variable window?
    Regards
    Adil

  • What is the shortcut to maximize window (full screen) which is normally done by pressing " -- " like key on the right top corner in macbook pro ?

    What is the shortcut to maximize window (full screen) which is normally done by pressing "<-->" like key on the right top corner in macbook pro ?

    There's no <--> key on ANYones keyboard. (Great answer Shootist )
    The other part of his answer is only applicable to certain windows (browsers specifically) as there is NO system wide maximize command in the manner you are asking.
    Apple's "maximize" function (green +) simply maximizes the window to the content, not the screen.
    For other keyboard shortcuts (and of course they may be outdated) try: this

  • What is the use of MAIN WINDOW in SCRIPTS

    what is the use of MAIN WINDOW in SCRIPTS, y we con't create a script w/o main window.
    Title was edited by:
            Alvaro Tejada Galindo

    Hi
    See this
    What are the different types of windows in SAP Scripts?
    Windows are defined in the Layout sets which define the position and the text to displayed.
    The different types of windows are:
    MAIN - Main Window
    The main window is a continous window which can extend over several pages. If the text in the main window fills up a page, a new page is created.
    Only one main window can be defined in the SAP Script whereas upto 100 instances of main window can be created in a page.
    VAR - Variable Window
    This window can have the variable contents displayed on them. The contents of the window cannot exceed the window size. The content can be formatted for each page.
    CONST - Constant Window
    The constant window can have a fixed content and is formatted only once.
    Main Windows (MAIN)
    Each form must have one window of type MAIN. Such a window is called the main window of the form. For SAPscript forms, the main window has a central meaning:
    • It controls the page break.
    • It contains the text body that may cover several pages.
    • It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
    As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the form. The SAPscript composer thus avoids reformatting of the text after each page break.
    Variable Windows (VAR)
    The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different form pages.
    Constant Windows (CONST)
    Starting with Release 4.0, the system internally processes windows of type CONST similar to windows of type VAR. Therefore, if you create a new window, always use type VAR.
    <b><REMOVED BY MODERATOR></b>
    Anji
    Message was edited by:
            Alvaro Tejada Galindo

  • What are the limits of using windows internal database in RMS?

    hi,
    We dont have SQL server to use and opting to use windows internal database
    What are the limits of using windows internal database in RMS?
    tnx

    Hi,
    the main limitation is that you cannot access a SQL express from remote (even there are tricks to work around that), so you cannot add another machine to the RMS cluster. 
    Microsoft's recommendation for production systems is to use a full SQL server, what allows you clustering and running all sorts of maintenance tasks.
    Other than that SQL Express has a 10GB total limitation for all databases running on that server.
    See also http://technet.microsoft.com/en-us/library/dd772673(v=WS.10).aspx for RMS hardware and software requirements. 
    Hope that helps,
    Lutz

  • What is the product key of windows 8.1 pro build9600

    what is the product key of windows 8.1 pro build 9600
    This question was solved.
    View Solution.

    Download and run Belarc Advisor, it will give you all sorts of information about your system including some keys
    http://www.belarc.com/free_download.html
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • HT3986 what is the risk to install windows 7 on mac book pro?

    what is the risk to install windows 7 on mac book pro?

    If you have back ups and follow apples instructions on using bootcamp assistant to install Win7, there is no risk.
    If you choose not to follow the instructions apple provides and have no back ups well then there is high risk of dissapointment.
    Just follow the instructions and you should be fine.
    Good luck.
    Edit:  Here's a link to the install instructions. Just choose the one for "Lion OSX". Should be the first one on the list.
    http://support.apple.com/manuals/%23macos
    Message was edited by: Probie1983

  • What is the setting- Pop up window 'Valuation' appears in Results Recording

    Hi,
    When i am doing Results recording in qa32, after processing all characteristics the status of all characteristics appears '5' but while saving it gives a pop-up window named 'valuation' where under 'valuate inspection point' sub screen field 'valuation' with entry 'Accept' in grey mode appears. Also a tab named 'valuation' appears on the same pop-up window with pencil symbol through with UD can be made in RR only.
    What is the setting because of which this pop up window comes while saving the results recording.
    Thanks in advance.
    Regards,
    Abhijit.

    HI,
    I am using insp. point 200 which have default valuse in valuation tab. In functional module tab no FM are attached.
    What are the setting required tobe changed in i want to use Insp. Point and do not want the Pop up window of Valuation.
    In some other cases i am using point and pop up doesn't come.
    Abhi.

  • What are the chances on installing Windows 8 pro on mac?

    Hi guys, i just wanna know if what are the chances on installing a windows 8 pro on mac?
    I just bought a CD of windows 8 pro. Im planning to use it on my mac because i am currently studying a software which is applicable on windows such as Visual Studio 2008, 2010 or 2012.
    I am planning to use bootcamp for windows 8 pro, i dont like to use parallels or vm.
    and i heard about bootcamp doesnt support windows 8, is that true?
    If it is true, so does it means it is not possible to use windows 8 using bootcamp?
    Am i right that bootcamp offers the drivers or something?
    Or can i just update the drivers for windows manually, u know the thing which u can found it on control panel on windows.

    Grazzii wrote:
    Running Windows 8 on my iMac right now buddy. You don't actually need Bootcamp to do all the heavy work for you - it's just a parition tool. However, you will need Bootcamp tools once Windows is installed to get the most out of windows. Without the Bootcamp tools installed, Windows will run - your mouse and keyboard should also work, but the resolution, graphics, speed.etc will all be a little over the place. I used Bootcamp tools 3.0 as it came with my iMac, not sure if the latest 4.0 works...
    Boot Camp 5.1 is the latest version, but no version includes drivers for Windows 8.

  • What is the default password for Windows server r2?

    What is the default password for the evaluation copy of Windows 2012 R2?
    You can't log on and it wants to change the password , yet nothing works . 
    This is the non gui version.  About to format it and install the GUI version to see if it doesn't have this bug.
    Thanks

    I downloaded from MS on Friday. 
    It refuses to let me set a password or log on. Tomorrow I will blow it off and try the gui version to see if it's any better.

  • What are the steps to install Windows 8.1 on my Macbook Pro w/retina using VMware?

    I have never attempted anything like this so I'm being (overly) cautious.  I already have vmware installed. Do I need Windows 7? 8.1? 32 or 64 bit?  SO many questions and I can't find the answers on Windows or vmware's sites.

    There are 2 ways to use Windows with Fusion.  You can either install it directly as a Virtual Machine, or you can install it as a Boot Camp parttion and you will have the option of using it with Fusion or booting directy into Windows.  I prefer to do it the latter way.
    If you install Windows within Fusion directly once you open Fusion
    1. Select "New" from the File menu.
    2. Double Click on Install from Disk or Image
    3. If your using a DVD it will show in the next Window, or if you are using an ISO click on "Use another disc image..." and locate the image
    4, Click Continue and then follow the prompts through installation.
    If you want to Install Windows via Bootcamp, you should use the Bootcamp assistant.  You will need the Windows DVD or disc image, and an 8GB flash drive.  Just run the assistant and follow the prompts.  Once Windows is installed, run Fusion and then:
    1. Select "New" from the File menu.
    2. Click on More Options...
    3. Click on Install from Boot Camp
    4. Click Continue and then follow the prompts to setup your Boot Camp partition to be used in Fusion.

  • What is the Java equivalent to Windows SystemMetrics?

    Hello,
    I would like to retrieve component metrics on items such as titlebar height, horizontal scrollbar height, default font etc.
    Unfortunately, I want to know the information without neccessarily having an instance of the control type visible (ie I want to know how high my forms titlebar will be before I create the form).
    The reason I need this is to feed information back to a third party product that requires the type of details that you could query from the SystemMetrics available in Windows.
    The tricky part is that the windows app needs to know these details before the Java app has created its first form.
    Any help would be much appreciated,
    thankyou, Sean.

    thankyou camickr,
    that link was very useful - please have the dukes.
    one thing that the link code doesn't give details about is how to find the metrics on the top level containers. Do you have any suggestions?

  • What is the size of capture window for MX440-VTD8X?

    I am trying to figure out how best to resize video I have captured with my MX440-VTD8X. For the application I am using (AVISynth) I need to calculate the PAR (Pixel Aspect Ratio), for this I need to know the size of the capture window for my video capture card.
    I think that this card uses a Philps SAA-7114H, although I cannot be certain as MSI don't seem to publish this fact anywhere. (I found a few references to the 7114 via Google so that is the best lead I have had so far).
    Anyway, even if I knew it used a 7114H that doesn't much help as I can't find any published data that tells me what the capture window (in microseconds) is for this card. The WDM driver might modify the window so how, so I can't just look it up in the datasheet for the 7114H.
    I am looking for figures for the capture window for both PAL and NTSC,
    could someone please help?
    many thanks,
    Kevin

    To quote from the article I have been using which gives step-by-step instructions on how to calculate to aspect ratio ..
    (Pixel Aspect Ratio, Source Aspect Ratio and Target Aspect Ratio)
    "To determine your source PAR, you first have to know what the aspect ratio of the capture window of your capture device is. This capture window is fixed, but again it is rarely exactly 4:3. The device always digitizes the same area of your video and resizes it to the size you set in your capture application. The raw captured height is always 480 lines for NTSC and 576 for PAL. The width of the capture window has to be determined. A table with known values (and a more elaborate explanation) can be found in section 5.4. A method for determining this value yourself can be found in chapter 11.
    Once you know the capture window width, the Image Aspect Ratio of your device can be calculated as:
    PAL IAR = (4 / 3) * ([window width in µs] / 52.0 µs) / (576/576)
    NTSC IAR = (4 / 3) * ([window width in µs] / 52.6555 µs) / (480/486) "
    The 'window width' is given for some capture cards in the guide, but unfortunately not the MSI one I am using, and the 'window width' does vary from one type of capture card to another.
    Without this information I am at a brick wall. There is a method to determine the window by using a PAL DVD player as the source video, playing some test image, the problem is that I only have an NTSC DVD player so I can't use that technique,
    this is something that the manufacturer must know, but unfortunately they rarely publish it,
    Kevin

Maybe you are looking for