HT204291 Airplay intermittent problem, why does not airplay work well anylonger?
Airplay intermittent problem, why does not airplay work well anylonger. Suddenly it drops out. Now this function has gone from great to ****.
Trying to view streamed content from the ipad to the Apple TV? Nah forget about it. Sooo dissapointing.
Restart your wifi router
Similar Messages
-
Why does not siri work in finland?
Why cant Siri provide directions or maps in Finland? What is the reason?
If I ask "What is the weather out side?" Siri finds the weather location almost everywhere and informs me" Here is the weather information for (Name of the place)" But if I ask "Where am I?" "Siri says: Sorry I cannot provide maps and directions in Finland" And just a minute a go it gave me the weather information.
And what makes it more annoying is that if I ask Siri " What's the time?" It says Sorry I don't know what time is it in ( it gives me the street address where I am).
So what is this madness? If siri knows exactly where I why can not it give that information? Is there some problems with European law or something else?
And why cant Google maps navigation work in Finland? If these few features would work in Europe Apple would crush Nokia like a bug.The reason is that Apple has not provided location service outside of the US as of yet. Such services depend on large back-end databases (which in the US, anyway, Apple does not own themselves), so it takes a lot of work to set up in any given country. Apple is still working in on Siri and it continues to expand. But all anyone here can do is point you to the following information about Siri and Apple's announced plans for it:
http://www.apple.com/iphone/features/siri-faq.html
http://www.apple.com/ios/ios6/siri/
Regards. -
Problem: Why does this only work for powers of 2?
I wrote this program to create a golf league schedule for, ideally, eight players. However I want it to be flexible enough to permit for other denominations, such as 10 or 12. When I run the program it works perfectly for any number that is a power of 2 (2,4,8,16,32,etc...) but it will not work for other even numbers such as 6,10, or 12. If anyone has any insights it would be most helpful.
*(This is my first post on this forum so if anything looks not quite right or if this post isn't worded exactly how it should be then I apologize in advance)*
Here's the three classes.
public class ScheduleDriver
public static void main(String[] args)
//instance variables
int max; //size of flight matches array
ScheduleMaster master;//instance of class
//get max number of players for flight
System.out.print("Max number of players in this flight:");
max = Keyboard.readInt();
master = new ScheduleMaster(max);
//create weekly schedules for season
master.createSchedule();
//display weekly schedules
master.displayWeekly();
}//end main
}//end ScheduleDriver
public class ScheduleMaster
//instance variables
int maxPlyrs;//maximum number of players in flight
Week[] weeklySchedule;//array of weekly matches
public ScheduleMaster(int plyrs)
//set up instance data and declare array size
maxPlyrs = plyrs;
weeklySchedule = new Week[plyrs];
//set up the size of each week's matches array
for (int pos = 0; pos < plyrs; pos++)
weeklySchedule[pos] = new Week(plyrs);
}//end for
}//end constructor
public void createSchedule()
int count = 0;//index of weeklySchedule array
final int QUIT = -1; //quit value for loop
int flag = 0; //value to continue or exit loop
//for each player A
for (int a = 1; a < maxPlyrs; a++)
//for each opponent of player A
for (int b = (a + 1); b <=maxPlyrs;b++)
//set count/index and reset flag to zero
count = (a - 1);
flag = 0;
//while still haven't found correct week for this match
while (flag != QUIT)
//if at least one of these players are already scheduled
//for a match this week
if (weeklySchedule[count].checkPlayers(a,b) == true)
//if last valid index of array has been reached
if (count == (maxPlyrs - 2))
//reset count/index to zero
count = 0;
else
//incriment count
count++;
}//end if
else
//assign this match to array of matches for week
//and then exit loop
weeklySchedule[count].setMatch(a,b);
flag = -1;
}//end else
}//end while
}//end for
}//end for
//fill in last week/position night
for (int pos = 0; pos < maxPlyrs;pos++)
//set up position match
weeklySchedule[maxPlyrs - 1].setMatch(pos + 1, pos + 2);
//incriment pos
pos++;
}//end for
}//end createSchedule
public void displayWeekly()
//for each week in schedule
for (int pos = 0; pos < maxPlyrs;pos++)
//display header
System.out.print("WEEK " + (pos + 1));
//if pos/index is 0 or even, flight plays front 9
if ((pos % 2) == 0)
System.out.println(" [FRONT 9]");
//else flight plays back 9
else
System.out.println(" [BACK 9]");
//display lines
System.out.println("----------------");
//display week's matches
weeklySchedule[pos].display();
//skip a line
System.out.println("\n");
}//end for
}//end displayWeekly
}//end ScheduleMaster
public class Week
int[] schedule; //array of players involved in matches for week
int max; //max number of players
int count = 0; //number of players currently involved in matches
public Week(int size)
//set up instance data and size of array
max = size;
schedule = new int[size];
}//end constructor
public boolean checkPlayers(int playerA, int playerB)
boolean flag = false; //flag to determine if at least one of
//the players to check are already playing
//this week
//for each element of array
for (int pos = 0; pos < max; pos++)
//if player A matches player already playing this week
if (schedule[pos] == playerA)
flag = true;
}//end for
//for each element of array
for (int pos = 0; pos < max; pos++)
//if player B matches player already playing this week
if (schedule[pos] == playerB)
flag = true;
}//end for
return flag;
}//end checkPlayers
public void setMatch(int playerA, int playerB)
//if array can take more matches
if (count <= (max - 2))
//insert players into array of active players for week
schedule[count] = playerA;
schedule[count + 1] = playerB;
//incriment count of players playing this week by 2
count = count + 2;
}//end if
else
System.out.print("No more matches can be entered!!!");
}//end setMatch
public void display()
//for every even numbered index starting at zero
for (int num = 0;num < max;num++)
//display the player at that position and the next consecutive
//player who will be his opponent for the week
System.out.println(schedule[num] + "VS" + schedule[num + 1] +
//incriment num
num++;
}//end for
}//end display
}//end WeekAh, I have discovered the problem. The reason for the infinite loop was because of the resetting of the counter/index after every successful match entry back to (a - 1). This was causing matches to be put into weeks where they didn't belong, which caused the program to infinitely loop because it couldn't find an appropriate week to place it's next match. The only time the count should be reset back to zero is when a new player A is being processed or the last valid array index has been referenced before an out of bounds exception would be thrown. I'm still not entirely sure why this doesn't occur on powers of 2 but theh again I haven't put too much thought into it having solved the initial problem! :)
Anyways thanks for the input all who posted, much appreciated.
Happy programming!!!! -
why does the airplay symbol not appear on the top left of my imac i bout this computer this august and i bought the apple tv yesterday?? what can i do to make the airplay work??
Open > About this Mac and see Version. If it's 10.7.x, read > http://www.apple.com/osx/uptodate
-
Why does not the scroll on tbody in new versions of Firefox and how it can solve the problem?
why does not the scroll on tbody in new versions of Firefox and how it can solve the problem?
scrolling overflow on tbody is no longer supported because that is not allowed in CSS 2.1 specification.
See [https://developer.mozilla.org/en/CSS/overflow notes for overflow] -
I just bought an Apple TV and I'm trying to connect airplay but the icon does not appear! My iPhone and Apple TV are on the same wifi connection but the airplay button does not apper? The same thing with my iPad mini
Try restarting all devices including portable iOS ones and your router.
Check Airplay is not disabled in AppleTVs settings.
AC -
Why does not Adobe flash player for iPad ,This is a very big problem
Why does not Adobe flash player for iPad ,This is a very big problem ,I do not know why Apple is so Popular
but Adobe is, in fact, continuing to update Flash for Android.
Only essential bug and security fixes. No new feature updates have been released for 2 years.
Of course we have those who wish fervently that the lack of Flash supprt will damage Apple severely and obsess about it all the time.
I thought they'd realised it was a lost cause ages ago... they mostly seem to have disappeared from this forum, at least... -
I have a problem in the program .. Why does not work ? :(
I have a problem in the program .. Why does not work ?
It look like the pic, !!
Thanx alot,You have opened the render engine, not the full program.
Mylenium -
Why does the AirPlay selection disappear with iTunes radio?
Usually there is a selector icon next to the volume slider at the top of the iTunes window that lets you choose among speakers and airplay devices. Why does this icon disappear when an iTunes radio station starts playing? After doing some trial and error, the option only disappears for certain stations.
I used iTunes open stream at http://kera-ice.streamguys.us/keraliveaacplus.m3u
works fine -
I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger not supported sign every minute or two. I decided to turn it off for the night and the next morning it worked fine and only the bottom sensor was triggered. Why does it still work and how long will it last?
Water in itself will not kill electronic components if you let it dry out. Your first reaction to turn it off was a good one but you could have waited even longer.
It also depends what's on your water that will stay after the water itself had dried; like salt. Anything that iseither acid or conductor left on the circuit board will reduce the life of the board. Given said this, no one could state how long your iPhone will work since no one will know for sure where the water had time to infiltrate before you removed your device and no one what's may left there.
Consider yourself lucky. I don't understand however what you mean by a sensor triggered. -
Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?
Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction. -
My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.
Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
Long shot but...
I wonder if it's a variation of this, of which I've seen many different symptoms...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
1. Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US -
After updating safari why does it only works intermittently now?
After updating safari why does it only work intermittently now?
Please explain in more detail what you updated and what isn't working now. You might also add anything you have already done to correct the problem.
-
Why does not my servo motor work?
Hello all,
I can work my servo motors, so I have two questions.
Firstly, I'm using PXI-7340 & UMI 7764 to control AC motor on servo motor (TAMAGAWA SEIKI co.),
But in MAX, motor doesn't work with servo type.And there is no signal between AnalogOutput and AnalogOutputGround.
Can I connect UMI to the motor correctly?
Now, I connect encorder signals with changing differential line driver (motor driver) to TTL (UMI) using quadruple differential line receiver.
Is it right?
If it is right, why does the motor work?
Secondarily, when I use stepper type in MAX, the motor work with open-loop. But when I use stepper type in MAX, the motor doesn't work with cloosed-loop.Why?
Polarities of encorders(A, B, Index) make matches my servo motors by setting in MAX.
Why?
Thanks,
megumi
Attachments:
TAMAGAWA SEIKI motor&driver.pdf 3063 KBThank you for your reply.
The "does not work" means that the motor doesn't move with servo type.
In MAX, there is no error when a target position is less than 999 in 1-D Interactive, but doesn't move. When the target position is more than 1000 and I click "Apply" and "Start", error ramps of "Motor off" and "Following error occurred" are red. And the motor doesn't move.
I thought that firstly signals of encorder have been wrong because the motor have not moved with stepper mode of closed-loop and feedback of encorder.
So I would connect correctly wiring of encorders, but the motor doesn't move.
Wiring of all is "STEP", "DIR", "AO", "ENC A, B and Index bar" respectively. In MAX, type is servo mode, feedback is encorder, kinds of limit switch are not used.
I supply it if you need the other setup of wiring or information.
Regards,
Megumi -
Why does not the text "Powered by Adobe Forms Central" fästän man has paid form
Why does not the text "Powered by Adobe Forms Central" fästän man has paid form
[email protected]These forms are not embedded correctly. I'm surprised they even work. You need to go to the distribute tab, click Embed button, copy the embed code provided and then paste that into your HTML. This FAQ explains in more detail and some of the issues you may encounter while embedding: http://forums.adobe.com/docs/DOC-1991
Randy
Maybe you are looking for
-
Hi Guys, We have come across requirement where we have to use Views rather then Database Tables... Kindly share your knowledge and views..: 1. Is there any difference in handling the views as compred to Tables....? 2. Like Tables do we have to create
-
From JHeadstart 1012 UIX to JHeadstart 1013 JSF : bc4j.xcfg issue
Greetings After doing all the procedures announced in the JHeadstart 10.1.3 release notes (the project compiles successively). When running the application this error emerges : 500 Internal Server Error oracle.jbo.ConfigException: JBO-33001: Cannot f
-
Hello all, I was reading a post about pdf security and the following script, created by Mike Brog, was mentioned. However, I do not know how to modify it to work for me. I am very new to scripting. Some of the elements look familiar to me, but I stil
-
hi Exdperts, Is there any function module to findout the given word in screen or report. just like Ctrl+F
-
How to supress '-' sign for commission (MPP)
hello, i have a requirement as i have to pass the commission values in the table control there if i have 2 .00 the valve is passed int to the table control but for 2 .00 - the program is getting terminated. so how can i supress the negative sign, an