From JHeadstart 1012 UIX to JHeadstart 1013 JSF : bc4j.xcfg issue
Greetings
After doing all the procedures announced in the JHeadstart 10.1.3 release notes (the project compiles successively). When running the application this error emerges :
500 Internal Server Error
oracle.jbo.ConfigException: JBO-33001: Cannot find the configuration file /myApp/model/common/bc4j.xcfg in the classpath
at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:367) at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:284) at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:539) at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManager.java:165) .... etc... etc...
The bc4j.xcfg is in place.
I've also added the bc4j.xcfg path to the list of 'resources' paths in Model (Project Properties > Project Content > Resources).
When trying to edit the file (Application Module > right click > configurations) all goes well. It actually saves data correctly into it.
Any suggestion ?
Thanks
Best regards,
Buondi,
You are running into an embedded oc4j bug which causes oc4j to crash randomly when pages get too big. See this post for a possible work around:
Issues with table size [JHS 10.1.3]
Steven Davelaar,
JHeadstart Team.
Similar Messages
-
Problems by Migration JHeadstart 1012 UIX to JHeadstart 1013 JSF
Hello,
I'm trying to migrate a JHeadstart 1012 UIX - Project to JHeadstart 1013 JSF - Project, but I'm getting a lot of errors by testing the Application Module :
Project: C:\JDevStudioH1013\jdev\mywork\KBV_X\KBV_X\Model\Model.jpr
C:\JDevStudioH1013\jdev\mywork\KBV_X\KBV_X\Model\src\kbv\model\KBVQepImpl.java
Error(3,8): JhsApplicationModuleImpl not found
Error(11,14): class kbv.model.KBVQepImpl should be declared abstract; it does not define method remove() of interface oracle.jbo.ComponentObject
Error(54,5): method launchTester(java.lang.String, java.lang.String) not found in class kbv.model.KBVQepImpl
Error(62,11): method advancedSearch(java.lang.String, java.util.ArrayList) not found in class java.lang.Object
Error(69,11): method processIntersectionShuttle(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String) not found in class java.lang.Object
Error(76,11): method processParentShuttle(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String) not found in class java.lang.Object
Error(83,11): method setRangeStart(java.lang.String, java.lang.String) not found in class java.lang.Object
C:\JDevStudioH1013\jdev\mywork\KBV_X\KBV_X\Model\src\kbv\model\common\QepBereichImplMsgBundle_de.java
Error(10,3): field Dtstamp_FMT_FORMATTER not found in class kbv.model.common.QepBereichImplMsgBundle_de
Error(10,50): identifier adfbc not found
What does it mean: "Cannot find script : null" in the additional console window
Loading JHeadstart Addins
Addin | Version | Status
JHeadstart Shared Components | 10.1.3.0.74| Loaded
JHeadstart Development Environment | 10.1.3.0.74| Loaded
JHeadstart Application Generator | 10.1.3.0.74| Loaded
Cannot find script : null
Regards
BorisSteven,
this time, I'm using a brand new JDeveloper, Steve Munch's tutorial "jhs-step-by-step" application, but I'm also getting errors by testing the application modul:
Project: C:\jhs-step-by-step\MyDemo\Model\Model.jpr
C:\jhs-step-by-step\MyDemo\Model\src\mydemo\model\common\EmployeesImplMsgBundle_de.java
Error(9,3): field HireDate_FMT_FORMATTER not found in class mydemo.model.common.EmployeesImplMsgBundle_de
Error(9,51): identifier adfbc not found
package mydemo.model.common;
// --- File generated by Oracle ADF Business Components Design Time.
// --- Custom code may be added to this class.
// --- Warning: Do not modify method signatures of generated methods.
public class EmployeesImplMsgBundle_de extends EmployeesImplMsgBundle {
static final Object[][] sMessageStrings = {
{ [i]HireDate_FMT_FORMATTER, oracle.jheadstart.model.adfbc.JhsDateFormatter }};
/**This is the default constructor (do not remove)
public EmployeesImplMsgBundle_de() {
init();
/**Generated method. Do not modify. Do initialization in the constructor
protected void init() {
/**@return an array of key-value pairs.
public Object[][] getContents() {
return super.getMergedArray(sMessageStrings, super.getContents());
Question: What is the rule of thumb - should I re-enable the project and generate a new JHeadstart Application Definition, after migrating or not?
Regards
Boris -
ive recently updated, itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?if i transfer the movies from the external to the laptop they will add to the library without any problem so theres no issue with the laptop but when i go to add file in itunes i can path to the external but as soon as i select the file nothing happens, just goes back to itunes
This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
I am trying to send an email from Lookout V6.6 using the Mailer object. I have an email address setup through GMAIL and have verified it works. Also, Lookout Mailer object is able to verify GMAIL server. I get the following error message when trying to send the email: "SMTP: invalid from address. SMTP error 530 5.7.0 Must issue a STARTTLS command first. d5sm35857280yhl.19". Anyone know what is causing this?
Another method is to use a SMTP relayer, we have deployed them in the past.
http://www.hmailserver.com/index.php?page=welcome
Mike
Forshock - Consult.Develop.Solve. -
ADF Jdbc Connection from bc4j.xcfg
How do you obtain a JdbcConnection from bc4j.xcfg file.
I am creating a DBUnit which needs a JdbcConnection object to properly setup datasets?
how about if I use this:
ApplicationModule module = Configuration.createApplicationModule(); //the applicationModule was successfully created
Connection conn = DriverManager.getConnection(Configuration.CONNECT_STRING,Configuration.USER_NAME, Configuration.PASS_WORD); Will this get the existing connection or create a new connection?I guess you get a new connection this way. If you have an ApplicationModule you can get the internal connection this way public Connection getCurrentConnection(ApplicationModule aApp)
Statement st = null;
try
// create Dummy Statement to get the connection
st = aApp.getDBTransaction().createStatement(0);
return st.getConnection();
catch (SQLException s)
// Log some message here and do something
finally
// close statement
if (st != null)
try
st.close();
catch (SQLException s2)
}Timo -
I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.
artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
I try to create an html for IPad. The html page contains an element overlapping a video, now it works as for view but the focus is still with video. This denies the event of overlapping element from occuring. Can please anyone help to solve this issue?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Using TACACS+ auth from ACS 5.1.0.44 to ACE. Having Issues with Shell (Exec)
Using TACACS+ auth from ACS 5.1.0.44 to ACE. Having Issues with Shell (Exec)
So I am trying to get TACACS+ auth to work for my ACE.
The command string that I have on the ACE is as follows:
tacacs-server host 172.16.101.4 key 7 XXXYYYZZZ timeout 15
aaa group server tacacs+ tacacs+
server 172.16.101.4
aaa authentication login default group tacacs+ local
aaa authentication login console local
aaa accounting default group tacacs+ local
But to finish getting this enabled I need to create some sort of shell (exec) string in the ACS that tells the ACE what permission level to allocate.
I do not know how to do this on the ACS 5.1.0.44.
Anyone know?
TAC made a good suggestion but the command path doesn't seem to line up with my version of ACS.
Thanks for your reply. About this question:
shell:<Context>*<Role> <Domain>
What I meant is that you need to check the following couple of things on
your ACS server in order to have AAA Tacacs users to login into the
ACE over the context with superuser ritghts.
Group setup ‑> users ‑> TACACS + Settings ‑> enable Shell(exec)
‑> enable Custom attributes ‑> right below this part you need to
use the following sintax to link the ACE context that this user
has access to.
For example:
shell:<Context>*<Role> <Domain>
shell:Admin*Admin default‑domain
Where this user will have access to the Admin context with the role
admin using the 'default‑domain'Wilfred,
What you will have to do on your version of ACS is modify the shell profile that your admins are hitting for other IOS devices or you can create another shell profile under Policy Elements -> Device Administration ->
Once you get into this shell profile select the Custom Attributes tab and put in the following fields close to the bottom of the screen, from the example you provided type shell:Admin for the attribute field and then default-domain for the value field, and make sure you select this requirement as optional, if you select mandatory and other IOS devices use this same shell profile you will force this av pair to these devices also which will impact the priv levels that then need for authentication.
After you add this attribute, save your changes and then test, also make sure that your Aceess Policy is calling this shell profile under the authorization profile for default device admin.
Thanks,
Tarik Admani -
ITunes store won't accept my password from my iPhone 5 this morning. Ideas? Know issues?
iTunes store won't accept my password from my iPhone 5 this morning. Ideas? Know issues?
And no matter how many times nor what I change the password to I cannot log in to purchase music.
Help!I tried "resetting" my password, but b****y iTunes just keeps asking me for ANOTHER password, and won't accept the password I want to use! I'm getting mighty fed up with iTunes - I'm a senior citizen, and my memory isn't as sharp as it might have been, so passwords HAVE to be fairly simple and OBVIOUS to me. I can't just keep thinking up new passwords because they are getting more and more irrelevant, and I will NEVER remember them.
What am I supposed to do now?
I can't use my iPhone when I'm out of the house, because it won't recognise my new email address and password. I can't use BTFON because it needs my password, which I can't get iTunes to accept.
I can't get the bloody thing to do anything, and although it cost me £600 when I bought it 2 years ago, I'm not very happy with it any more because I just can't get the thing to do anything.
HELP!!!!
Bill -
The artwork on my ipod touch 5th generation became scrambled.It is showing completely different image while i play song.But in itunes everything seems perfect.I tried deleting all albums from itunes,restoring ipod,re-sync ipod,nothing resolved my issue.Please help me
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?
This tech note addresses your problem: iOS: Deactivating iMessage
-
My daughter has an iphone 5s and I have her old 3GS. She receives all my imessages that I rcv or send to other people. Can anyone advise how to stop this? we have removed the 3gs from her itunes account but it hasn't stopped the issue.
There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon. -
I have bought a movie from iTunes it wouldn't load though cause of storage issues... Any way I could get a refund??
Hi, Nselkhatib.
You can report a problem with the purchase via the steps in the article below.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
You can also report an issue with this movie by accessing your purchases history in iTunes on your computer.
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Cheers,
Jason H. -
Defining bc4j.xcfg for Webservice from ADF Application Module
Hi all,
I've already posted my previous question in JBO30003 while executing ADF Application Module WebService
but no replies at all :)
after thorough inspection, i found that why my client can connect to ADF AM and why my WebService Invocation is failed with JBO 300003. My J2EE Client application is connected to ADF AppModule with some configuration in CPX file.
<JboProject
id="DataBindings"
xmlns="http://xmlns.oracle.com/adfm/application"
version="10.1.2.18.73"
SeparateXMLFiles="false"
Package=""
ClientType="JClient" >
<Contents >
<DataControl
id="AppModuleDataControl"
SubType="DCBC4J"
SupportsFindMode="true"
SupportsTransactions="true"
Package="package"
FactoryClass="FactoryImpl"
Configuration="AppModuleEmbeddedAS" >
<Parameters >
<Parameter
name="Sync"
value="Immediate" >
</Parameter>
</Parameters>
</DataControl>
and so forththis CPX file define that this client connect to Application Module on my AppServer with "AppModuleEmbeddedAS" configuration, as stated in my BC4J.XCFG.
<AppModuleConfig name="AppModuleEmbeddedAS">
<AppModuleJndiName>AppModuleBean</AppModuleJndiName>
<java.naming.security.credentials>welcome</java.naming.security.credentials>
<DeployPlatform>EjbIas</DeployPlatform>
<java.naming.security.principal>admin</java.naming.security.principal>
<jbo.internal.embedded>true</jbo.internal.embedded>
<HostName>localhost</HostName>
<jbo.ampool.dynamicjdbccredentials>false</jbo.ampool.dynamicjdbccredentials>
<ApplicationName>AppModule</ApplicationName>
<jbo.ampool.doampooling>false</jbo.ampool.doampooling>
<java.naming.security.authentication>simple</java.naming.security.authentication>
<java.naming.factory.initial>oracle.jbo.common.JboInitialContextFactory</java.naming.factory.initial>
<ConnectionPort>23891</ConnectionPort>
<JDBCDataSource>jdbc/DBGEBPOC_on_LOCALHOSTDS</JDBCDataSource>
<java.naming.provider.url>ormi://localhost:23791/current-workspace-app</java.naming.provider.url>
<jbo.server.internal_connection>jdbc/DBGEBPOC_on_LOCALHOSTCoreDS</jbo.server.internal_connection>
<jbo.dofailover>false</jbo.dofailover>
<ApplicationPath>current-workspace-app</ApplicationPath>
<jbo.ampool.resetnontransactionalstate>false</jbo.ampool.resetnontransactionalstate>
</AppModuleConfig>Now, how could I define configuration like my J2EE Client in my web service? as we know that web service's client is web browser. Does it mean that we can't define any CPX file?
FYI, My webservice's End Point pages is successly shown up. but when i invoke the method, it returns XML with faultmessage Error JBO30003.Hi,
You can directly edit the bc4j.xcfg file. Note that the WebService binding is not created from the Am directly but from the deployed WSDL file.
Frank -
My new iPad camera just freezes up and does not store any photos. Also my photo folder did not populate from my backup. Is anyone else having the same issue. If so what can I do to get the camera to take and store the picture. I am running the lastest operating system version.
If it says Not Enough Storage Space on iCloud then you can get more Storage space for iCloud if you want to backup more Data on iCloud Storage. You will find the Pricing for Additional Storage Space and how to Buy Storage Space for iCloud from your Device in the Link below.
http://support.apple.com/kb/ht4874
http://support.apple.com/kb/HT5879
Maybe you are looking for
-
I Would Like a "Expert's" config. of a new MBP
I was offered by my parants that they will but me a new MacBook Pro. As much RAM as I want, the (solid stae) newer kind of HD, but about a year ago it was getting a bad rap from a lopt of comments I read on here. I can't remember the exact name fo
-
Hello, When I insert a memory stick into my HP Photosmart C5180 All in one and I try to "save photos on computer" the printer reads: "You need to install device software". This all started happening after I installed Snow Leopard on my Mac 10.6.8. Ca
-
After subscribing to iTunes match the music I had uploaded from my cd's is gone . How do I get it back?
-
Ok, I am a PC adobe user who recently bought a Mac. I have a DVX-100a and I cannot for the life of me find the right settings for Final Cut Pro 5.0.1 to see this camera. I plugged in an old Hi-8 and it saw it just fine...controlled it and captured ju
-
I know the battery indicator used to be green all the time. But last night, after charging, I looked at it and the battery indicator was full (100%) and it was green, but when I pulled the plug, it became white. Still at 100% but it is now white or g