HT2101 i got an iphone 5c last saturday. i noticed that after merely 5minutes of using facebook, my phone got warmer than the usual. i know that phones will get warm if being used but getting a warm phone after just 5minutes of surfing with 3G seems not n

i got an iphone 5c last saturday. i noticed that after merely 5minutes of using facebook, my phone got warmer than the usual. i know that phones will get warm if being used but getting a warm phone after just 5minutes of surfing with 3G seems not normal. compared it with iphone 5 and 5s and they are not getting warm like that. is it a software or hadware issue?

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

Similar Messages

  • My email storage shows 13.3 GB used but I only have about 20 emails in my mailbox with no attachments.  Do I need to back up, delete everything and restore to get rid of the cache?

    My email storage show 13.3GB used but I only have about 20 emails in my inbox with no attachments.  I assume it's memory cache that's clogging my phone.  Do I need to backup and restore to get rid of all of it??

    There is nothing wrong with the OS update.
    Delete ALL your email accounts.
    Restart Playbook
    Put the accounts back and ensure they are all set with PUSH ON.  Manual (push off) will burn battery.
    Similarly delete your wifi connections and add back when required. 
    Turn off wifi is not connected to wifi. 
    Any "hunting for connection" in email or wifi will burn up battery.

  • Hi, my memory was full so i decided to backup my iphone to the laptop and by mistake everything got deleteed and got replaced by the old backup? anyway i can get my stuff back ?

    hi, my memory was full so i decided to backup my iphone to the laptop and by mistake everything got deleteed and got replaced by the old backup? anyway i can get my stuff back ?

    Oh no! You restored from a backup instead of creating one! If you do not have a more recent backup anywhere, then there is no way!

  • My iPhone has suddenly started sending emails in Courier New (rather than the standard Arial).  They appear in Arial when I compose them, but turn to Courier new in the sent folder and when displayed to the recipient.  I use Yahoo Mobile Mail.  Help!

    My iPhone has suddenly started sending emails in Courier New (rather than the standard Arial).  They appear in Arial when I compose them, but turn to Courier new in the sent folder and when displayed to the recipient.  I use Yahoo Mobile Mail.  Help!  How can I change the settings so that the sent emails go back to Arial?  Thank you!

    I'm not sure if it's a Yahoo Mobile mail or an iphone issue... have asked the Yahoo forum but no replies yet...  Any help appreciated!

  • HT201363 Dear Reader  I have forgotten the answers to my security-questions. So it says that i will get an e-mail to reset my questions, but i have not gotten an e-mail? So i tried it again (after a month) and it still doesen't work. I really need to know

    Dear Reader
    I have forgotten the answers to my security-questions. So it says that i will get an e-mail to reset my questions, but i have not gotten an e-mail?
    So i tried it again (after a month) and it still doesen't work. I really need to know what's wrong :/
    Thank You for helping me

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • I just got my macbook pro a week ago and i was told that i will get the os x lion a week ago i was told that i can get it for free, is this true and if so how do i get it

    i just got my macbook pro a week ago and i was told that i will get the lion for free, if this is true, then how do i get it.

    Hi,
    Not that's not normal and is one of the Problems I was having before Restoring as New...
    Just make sure you Sync ALL your important Info... Contacts... Music... Etc... to your Computer...
    and then do a Restore as New...
    i was a bit reluctant at First, because I hadn't done it before... But it was So Easy and am Really Glad I did...
    Cheers,
    Here's Another Useful Link:
    http://www.apple.com/support/iphone/

  • Within the last hour, I noticed that my older MacBook Pro, while I was playing it in iTunes, lost contrast on the screen.  I am sorry, but I did not take exact notes on this event.  Around the same time, I did do a back up, uploaded software, etc.

    Within the last hour, I noticed that my older MacBook Pro, while I was using iTunes, lost contrast on the screen.  I am sorry, but I did not take exact notes on this event.  Around the same time, I did do a back up, uploaded Apple software, etc.
    I'm using two MacPros simultaniously, the old one for iTunes, and the new one for the other things.  My new one has no problems, so am wondering if there is an easy way to correct the older MacPro's contrast problems.  The computer is over three years old, and I'm wondering also if this failure is an aging sign.  (I also have other problems, such as a noisy DVD drive, which is part of the reason I bought a new MacBook Pro.)

    Is the older MBP a pre-Unibody model from early 2008? If so, it could be having this problem:
    http://support.apple.com/kb/ts2377
    If so, you would be entitled to a free repair.
    The lost contrast could be considered distorted video.
    Do you have an external monitor? If the external shows the same lost contrast, the graphics chip is likely the culprit. If the external is OK, then you probably have an issue with the built in display or possibly with its connections.
    You may also want to check in Universal Access to see if the contrast bar is set in its normal position (all the way to the left).
    Apple has a special test they can run to diagnose the NVIDIA issue, so if you have access to an Apple Store, make an appointment at the genius bar to have it run.
    Good luck!

  • HT203167 i set up iPhone as a new phone and just want to redownload old purchased apps not in list

    i set up iPhone as a new phone and just want to redownload old purchased apps not in the list ("not on this phone"). 
    a few apps don't exist and only exist on a computer with an old sync.
    i don't want to sync, but I want those apps again.
    if you can help, please let me know.   Thanks!
    Tony

    Transferring information from your current iPhone to a new iPhone

  • I recently bought a new laptop, installed iTunes and imported my library during a sync with my iPhone. Now I've noticed that any tracks that were ripped into my library from a CD won't play on my iPhone. They're visible but with a red circle next to them.

    I recently bought a new laptop, installed iTunes and imported my library during a sync with my iPhone. Now I've noticed that any tracks that were ripped into my library from a CD won't play on my iPhone. They're visible but with a red circle next to them.

    Hi, BartleyBauer. 
    If the media that you are attempting to sync plays in iTunes, try removing the preference to sync music as this remove the media from the device.  Once this is done, try syncing the media again. 
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/ph12313
    Cheers,
    Jason H. 

  • I am using iPad latest model in India.Let me know where I will get accessories in Mumbai, India, I am using iPad latest model in India.Let me know where I will get accessories in Mumbai, India

    Dear Sir,
    I want to know where I will get accessories for this iPad in Mumbai,India

    You can read the warranty yourself here: https://www.apple.com/legal/warranty/

  • I just lost all my contacts on the ipod2 ...how do I get them back? They just disappeared while I was typing in a new contact.

    I just lost all my contacts on the ipod2 ...how do I get them back? They just disappeared while I was typing in a new contact.  Help!!

    joephilipose,
    If the contacts are still in Address Book on your computer, but just not on the phone, you can tell iTunes to force replace the contacts on your phone with those from your computer. You can do this by going into the Info tab when your iPhone is connected, and checking the Contacts box under the Advanced section at the bottom of the page.
    You may also want to backup your Address Book information as well. It's a good idea to make periodic backups of your contact and calendar information in case information accidentally gets deleted or changed. You can find out how to backup your Address Book data here:
    http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
    To backup your iCal information, follow the steps in this article:
    http://docs.info.apple.com/article.html?path=iCal/3.0/en/9889.html
    Hope this helps,
    Jennifer B.

  • My start up disc is full i have a macbook air, i back everuthing up with time capsule and  have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"

    my start up disc is full i have a macbook air, i back everuthing up with time capsule and  have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
    To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
    You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
    When you're done with ODS, quit it and also quit Terminal.

  • When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

    When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

    I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

  • After new weblogic domain configuration with oim 11g, not able to login

    After new weblogic domain configuration with oim 11g, not able to login for the frist time as xelsysadm.
    it says invalid sign in. and in logs it says password is invalid.
    Please help me in asap...

    Thanks Pallavi for the effort. I tried commenting out, its still the same. It do not throw exception this time. However, It tells me that the recon event is completed and linked to user. When I go to user's profile, I dont see the resource provisioned.
    Also,
    The Account ID in recon manager of Web Console and the Account ID that is stored in the tables, doesn't match.
    I wrote a custom code to fetch account and user details and here is the output,
    User Key : 13 -- has Login Id : USER_CS
    Account with account key : 49 is with user key : [USER_CS]
    Getting Account Data......
    {UD_TEST_1P_EMPLOYEENUMBER=1567, UD_TEST_1P_NAME=Kim1}
    However the Account Id in recon manager is : 91
    This seems fine.
    Doesn't this mean, the account is reconciled successfully?
    The problem is that, I am not able to see this resource in User's resource profile.
    Edited by: Shashi kiran on Apr 18, 2013 3:56 PM

  • My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.

    My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.Help pleaseeeeee!

    You can work through the five 5 R's of troubleshooting to rule out the possibility of corrupted software.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damaged part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

Maybe you are looking for

  • Upgraded to 10.7 camera is no longer recognized

    I guess I can restarting again, but basically I plug in my Nikon 2500 and it doesn't matter if I start iPhoto before or after. The camera never shows up, not in iPhoto, not in Finder, not on the desktop. I took another picture, it has a specific butt

  • Problem with Task 65400034 BOR BUS2105 method EDITASYNC

    Hi all, i implement Workflow scenario for purchase requisition, i use the SAP standard workflow. When a user reject a purchase requisition the system launch the workflow n° 65400029, the first activity is the task n° TS65400034 which execute the meth

  • Networking windows Pc With mac

    I would like to share a printer that i have connected to my mac with a windows PC. The windows PC is running windows XP home eddition. I can network and share files but the problem is whene i try to share the pritner it will not print anything the pr

  • The order of joining the tables in a query ANSI92

    Hi all! I have three table in Univerce. I need that those tables joined in next order: tab1 inner join tab2 right join tab3 When creating a report in WebI they are connected as (regardless of the order of dimentions): tab1 right join tab3 inner join

  • Managing and configuring log files for Oracle 9ias

    Hi all, I'm wondering where I can find documentation on managing and configuring log files like: ORACLE_HOME/admin/ sid/*dump/* ORACLE_HOME/assistants/opca/install.log ORACLE_HOME/webcache/logs/* ORACLE_HOME/dcm/logs/* ORACLE_HOME/ldap/log/* ORACLE_H