HT2480 When I type a text message the name it puts as "to" does not match the name that I have on my contact. i.e. shows John and Jane Doe when contact just has Jane Doe. Is there some old data that should be cleared? Can I stop the auto selection?

See question above

Do you have Facebook contacts turned on? It may be at some time you got an email message from them and that is the way they have their return address set. All previously used addresses are in a cache on the phone and the only way to clear that is to restore the phone as a new device, which deletes all data from the phone. You cannot restore from a backup because the information is in that and will just be put back on the phone.

Similar Messages

  • When I send a text message to a friends phone I get a Not Delivered message but I can receive his message

    When I send a text message to a friends phone I get a Not Delivered message but I can receive his message

    Hello dgantz,
    The following article provides information and steps that can help get Messages working correctly.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Cheers,
    Allen

  • There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"

    Good day Guys
    First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :) 
    While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
    We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
    They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
    But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
    With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
    "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
    Outlook is unable to connect to the Proxy server. (Error Code 0)"
    Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
    Your assistance will be greatly appreciated.

    Hi,
    Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
    For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
    can change the host name by referring to the following article:
    https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
    Thanks,
    Simon Wu
    TechNet Community Support

  • Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040

    Please assist I am on a Windows 7 64 bit machine I have VS 2010 and have been fighting with this new program that I was brought on to help with - Issue is that I am unable to get rid of this issue. There is so many solutions but none have worked. If someone can give me some help with what has worked for you.
    The error is Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
    This is with CR installed on 64 bit.
    Thank you very much for any assistance with this problem,
    Kris

    Hi Vittorio
    Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

    Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
    ===========================================================
    This is a SQL Server 2012 Developer Edition of SSRS.
    I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
    I can still get to the http://servername/ReportServer site.
    Neither of these are using Sharepoint.
    Any help resolving this issue would be greatly appreciated.
    Below is the stack trace.
    ===========================================================
    [FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
    fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
    StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
    assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
    or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
    System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
    compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
    virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
    context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
    noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
    context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
    +176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
    ===========================================================

    Hi Glen，
    "The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
    In this case, it should be caused by:
    While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
    ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
    If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
    uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
    The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
    Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
    does not match the assembly reference."
    For more information about the error message and the loading process, please see:
    http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
    https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
    Thanks,
    Jinchun Chen

  • The cumulative balance displayed in FS10N does not match the sum of the det

    Hello,
    The cumulative balance displayed in FS10N does not match the sum of the details.  For example, we have a GL disbursement account that has a ***. Balance of 8 million.  The debit is 2 million and the credit is 10 million. But, when you drill down on the ***. Bal. for the current period, the sum of the details is 9 million.  According to our users, the 2 balances should equal.  I did a search in this forum and found 1 post stating they had the same issue and the answer was to run f.16. Has anyone experienced this and if so, how did you handle it?  I'm not sure how f.16 functions.  Do we have to run it for each consecutive year?  I'm not a FI specialist.  I'm responsible for data archiving and the users think it's related to archiving.  However, we have a test system that was resynced with production prior to when archiving was done and it shows that this issue is pre-existing.
    Thank you very much in advance,
    Lourdes

    Hello,
    There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
    You need to identify which accounts are being changed with line item display at a later stage.
    In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
    1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
    2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
    3. Block the account for posting in COA Segment and Company Code Segment in FS00
    4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
    5. Now, remove the block you kept on the GL Account in FS00.
    This will reset the line item display retrospectively.
    Hope this will solve your problem.
    Regards,
    Ravi

  • Outlook Security Alert - "the name on the security certificate is invalid or does not match the name of the site"

    Due to our company changing names, we recently moved to a new domain. All users were at first getting a certificate error when opening Outlook "the name on the security certificate is invalid or does not match the name of the site." After our network
    admin made some changes, nobody receives this error anymore except one user. The URL at the top of the security alert is the old domain, mail.olddomain.com. I checked the users Exchange Proxy Settings in Outlook, everything is showing the URL's of the new
    domain so I'm not sure where this is coming from. I'm assuming it has to be something on her local machine since she is the only one who still gets the error.
    Thanks in advance for any help.
    Exchange server 2008
    Outlook 2010

    Hi,
    Please follow all above suggestions to confirm whether the issue happens in OWA. And run Test E-mail AutoConfiguration in Outlook to check whether there is any URL settings using the old domain.
    If the issue doesn’t happen in OWA and your URL configurations are all same as others and set correctly, please create a new Outlook profile to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • "Name on the Security Certificate is Invalid or Does not Match..." using Outlok 2007 w/ Exchange 2007

    Good afternoon!
    We just completed our Exchange 2007 implementation (migration from Exchange 2003... a fun romp of 24 straight hours for the final push) and noticed an error that only occurs on Outlook 2007 clients connecting to the Exchange 2007 server: "Name on the Security Certificate is Invalid or Does Not Match the Name on the Certificate".
    Now, I've done my reading into this and have determined that due to how Outlook 2007 clients managed their OAB, it is essentially through a web virtual directory now, no longer through Public Folders and this is essentially the base of our issue. See, our mail server has an internal FQDN of mail.ourdomain-domain.com whereas it has an external FQDN (which is what the SSL Cert is tied to) of owa.ourdomain.com.
    So, essentially what I'm seeing is our internal Outlook 2007 clients (limited to I.S. employees only right now, thankfully) are seeing this SSL error because Outlook 2007 is trying to pick up the OAB using the internal FQDN instead of the external FQDN (which would work as well, due to some internal DNS trickery we have configured).
    My question is (finally), is there a way to circumvent this internally so we never see this SSL error prompt or a way to force Outlook 2007 to use the external FQDN? I have made sure all the settings in Exchange Management Console for OAB and the like have both the internal and external FQDN set to owa.ourdomain.com (the valid SSL name), but it does not appear to have made a difference. Granted, I have not rebooted... but I do not think that is necessary in this instance.
    Any suggestions would be appreciated. Thanks!!

    Hi All,
    1) I am using Windows SBS Server 2008 with Exchange 2007 installed on it. With all the Certicate configured internally. We haven’t purchased the Certificate from any outside authority yet.
    2) Also, user were getting Error message "The name on the security certificate is invalid or does not match the name of the site" in outlook, to resolve this issue I followed the steps mention on "http://support.microsoft.com/kb/940726" &  “http://social.technet.microsoft.com/Forums/en-US/exchangesvrclients/thread/697f79e2-ca8f-4a2e-bae5-55d3fa7f703f/?prof=required” however I was able run only first command as I was unable to find "EWS (Default Web Site)", "oab (Default Web Site)", "unifiedmessaging (Default Web Site)".
    3) After reaserching, I run following commands to get the status, location of WebServicesVirtualDirectory, OABVirtualDirectory & UMVirtualDirectory
    [PS] C:\Windows\System32>Get-WebServicesVirtualDirectory | fl
    Name                          : EWS (SBS Web Applications)
    Server                        : PASVR01
    InternalUrl               : https://sites/EWS/Exchange.asmx
    ExternalUrl              :
    [PS] C:\Windows\System32>Get-OABVirtualDirectory | fl
    Name                          : OAB (SBS Web Applications)
    Server                        : PASVR01
    InternalUrl               : https://sites/OAB
    ExternalUrl              :
    [PS] C:\Windows\System32>Get-UMVirtualDirectory | fl
    Name                          : UnifiedMessaging (SBS Web Applications)
    Server                        : PASVR01
    InternalUrl               : https://sites/UnifiedMessaging/Service.asmx
    ExternalUrl               :
    4) Then after getting the correct locations of all the directory I run the following commands to change the internal url on existing Certs
    Set-ClientAccessServer -Identity PASVR01 -AutodiscoverServiceInternalUri https://pasvr01/owa/autodiscover/autodiscover.xml
    Set-WebServicesVirtualDirectory -Identity "PASVR01\EWS (SBS Web Applications)" -InternalUrl https://pasvr01/owa/ews/exchange.asmx
    Set-OABVirtualDirectory -Identity "PASVR01\OAB (SBS Web Applications)" -InternalUrl https://pasvr01/owa/oab
    Set-UMVirtualDirectory -Identity "PASVR01\UnifiedMessaging (SBS Web Applications)" -InternalUrl https://pasvr01/owa/unifiedmessaging/service.asmx
    5) However, this does'nt resolved our issue so run the following commands to change the external url on existing Certs
    Set-WebServicesVirtualDirectory -Identity "PASVR01\EWS (SBS Web Applications)" -ExternalUrl https://exchange.domain.com/owa/ews/exchange.asmx
    Set-OABVirtualDirectory -Identity "PASVR01\OAB (SBS Web Applications)" -ExternalUrl https://exchange.domain.com/owa/oab
    Set-UMVirtualDirectory -Identity "PASVR01\UnifiedMessaging (SBS Web Applications)" -ExternalUrl https://exchange.domain.com/owa/unifiedmessaging/service.asmx
    6) I also tried running "New-ExchangeCertificate -PrivateKeyExportable $True -Services “IMAP, POP, IIS, SMTP” -SubjectName “cn=PASVR01" as I have deleted one of the certicate on this server in past.
    7) Following was the status of internal and external URL.
    [PS] C:\Windows\System32>Get-WebServicesVirtualDirectory | fl
    Name                          : EWS (SBS Web Applications)
    Server                        : PASVR01
    InternalUrl               : https://pasvr01/owa/ews/exchange.asmx
    ExternalUrl              : https://exchange. exchange.domain.com /owa/ews/exchange.asmx
    [PS] C:\Windows\System32>Get-OABVirtualDirectory | fl
    Name                          : OAB (SBS Web Applications)
    Server                        : PASVR01
    InternalUrl               : https://pasvr01/owa/oab
    ExternalUrl              : https://exchange. exchange.domain.com/owa/oab
    [PS] C:\Windows\System32>Get-UMVirtualDirectory | fl
    Name                          : UnifiedMessaging (SBS Web Applications)
    Server                        : PASVR01
    InternalUrl                   : https://pasvr01/owa/unifiedmessaging/service.asmx
    ExternalUrl                   : https://exchange. exchange.domain.com/owa/unifiedmessaging/service.asmx
    10) Still we are facing this issue of "The name on the security certificate is invalid or does not match the name of the site" in outlook.
    PLEASE HELP ME TO RESOLVE THIS ISSUE.
    Thanks in Advance,
    Asif

  • Exchange 2013 - The name of the security certificate is invalid or does not match the name of the site

    Hi,
    I know this question has been asked a ton of times, but I haven't found any instance of this question asked for exchange 2013.  Yes, I've seen Exchange 2010, Exchange 2007, but not Exchange 2013.  The symptoms are all similar.  Here is a description:
    1 Exchange 2013 server, all roles installed.
    External domain name:  associates.com
    Internal AD domain name:  associates.local
    Client installed a third party SSL certificate, but did not purchase a SAN or UC certificate, so there is one namespace on the SSL cert, and that represents the external OWA name:  mail.associates.com
    Now, when internal OUtlook 2010 clients start, they get the "The name of the security certificate is invalid or does not match the name of the site."
    I'm just wondering if http://support.microsoft.com/kb/940726 still applies to Exchange 2013 to fix this issue.  Does this article apply to Exchange 2013?  If so, I will follow the above
    article.  If not, please direct me to any articles for Exchange 2013 that addresses this.
    the autodiscoverserviceuri points to: 
    https://netbiosnameofmailserver.associates.local/Autodiscover/Autodiscover.xml
    Thanks!
    A

    Yes, the http://support.microsoft.com/kb/940726 still applies to Exchange2013.
    As per my understanding on this post;
    - Poster's Exchange2013 has no SAN certificate.. (usually used for local address like; NETBIOS.Domain.lan).  Be reminded that SSL providers will no longer accepts .LAN or .LOCAL in very near future.
    - By default it uses local url for EWS, Autodiscover, etc.. (if you don't have SAN certificate installed in your CAS server, you would see the certi warning)
    Anyway, I just want to share my case after applying the said work around long time ago (maybe some of you might encounter it as well): my Outlook still showed the certificate warning (I was just keep clicking the YES button).. I was wondering
    that time what was wrong with my virtual directory settings.. until I decided to click "NO" for an answer to that certificate warning message, then voila! it didn't bug me anymore.  Oh by the way, the certificate warning usually give you a hint
    what triggers it like; "autodiscover.Domain.lan" on the first line of message, but in my case it just "NETBIOS.Domain.lan" (didn't make any sense, did it?).. Well, unfortunately I didn't have the chance to figure out what triggered that event.. 

  • The name on the security certificate is invalid or does not match the name of the site

    Hi Guys,
    Every time when we login to SAP Business One, we are getting two identical security Alerts, that we needs to click "Yes" twice.
    Text of error: “The name on the security certificate is invalid or does not match the name of the site”
    We tried to install certificate, but it is not solved this certificate issue and the alert still pops up on login.
    I guess, something wrong with dashboard settings, but don't really know what exact and how to fix it.
    Thanks,
    Sergey

    Hi,
    Please check SAP note:
    1810486 - Dashboard Certificate Sercurity Alert appears on every
    logon to Business One
    Thanks & Regards,
    Nagarajan

  • The name on the security certificate is invalid or does not match the name of the site" : IE

    Hi All,
    All clients are getting “the name on the security certificate is invalid or does not match the name of the
    site” when its reboot and try to access website.
    I don’t have idea about certificate authority. Can anyone help on how I start troubleshooting this.
    Is there any group policy setting which resolve this issue.
    Please suggest what parameter I have to check. 

    > All clients are getting “the name on the security certificate is invalid
    > or does not match the name of the site” when its reboot and try to access website.
    "View Certificate" should tell you.
    Greetings/Grüße,
    Martin
    Mal ein
    gutes Buch über GPOs lesen?
    Good or bad GPOs? - my blog…
    And if IT bothers me -
    coke bottle design refreshment (-:

  • Exchange 2013 w/Outlook 2013 "The name of the security certificate is invalid or does not match the name of the site"

    I've completed an upgrade from Exchange 2003 to Exchange 2013 and I have one last SSL message that I can't get rid of.  I've installed a 3rd party cert that is working great for webmail and cell phone access but for some reason the Outlook 2010/2013
    clients get prompted for a security warning.  I just implemented the SSL cert yesterday and I've noticed that new installs of Outlook seem to work just fine.  My Outlook 2013 client doesn't prompt me with the message but I have other users who are
    still getting the "The name of the security certificate is invalid or does not match the name of the site" error.  The domain on the cert error show up as server.mydomain.local.  I've gone through all the virtual directories and pointed
    all of my internal and external URL's to https://mail.mydomain.com.   This made one of the two warnings go away but not the second.  I've dug around on google and gone through everything I could find here and as far as I can tell my internal
    and external url's are configured properly and I can't figure out where this error is originating from.  Any ideas on where I should look outside of the virtual directories? 
    I'm including a good link I found that contains all of the virtual directories I updated.  I've checked them through both CLI and GUI and everything looks good.
    http://www.mustbegeek.com/configure-external-and-internal-url-in-exchange-2013/
    http://jaworskiblog.com/2013/04/13/setting-internal-and-external-urls-in-exchange-2013/

    Hi,
    When the Outlook connect to Exchange 2013/Exchange 2010, the client would connect to Autodiscover service to retrieve Exchange service automatically from server side. This feature is not available in Exchange 2003 Outlook profile.
    Generally, when mailbox is moved to Exchange 2013, the Outlook would connect to server to automatically update these information. It needs time to detect and update the changes in server side. I suggest we can do the following setting For autodiscover service:
    Get-ClientAccessServer | Set-ClientAccessServer –AutodiscoverServiceInternalUri https://mail.mydomain.com/autodiscover/autodiscover.xml
    Please restart IIS service by running IISReset in a Command Prompt window after all configuraions.
    Regards,
    Winnie Liang
    TechNet Community Support

  • The name of the security certificate is invalid or does not match the name of the site error?

    I am looking for some help folks. We are in a Outlook 2007/Exchange2010/Windows2008R2 environment.
    When users open Outlook off the network, and occasionally on the network, they get the error
    The name of the security certificate is invalid or does not match the name of the site error
    The CAS hostname is HRECAS.XXX.ORG. The URL that is listed on the SSL certificate (issued by VeriSign) is WEB.XXX.ORG. WEB.XXX.ORG is what users use to get to OWA and such.
    When I use testexchangeconnectivity.com, under certificate name validation I see an error that reads:
    Host name autodiscover.xxx.org doesn't match any name found on the server certificate CN=web.xxx.org.
    Does this mean somehow we have to add autodiscover.xxx.org on the certificate?
    I tried to add AutoDiscoverExternalUri using
    http://support.microsoft.com/?kbid=940726 &
    http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/2d0c0f5f-e4ec-4f33-a37d-b94fd7a2319f on the CAS server.
    Set-ClientAccessServer -identity HRECAS -AutodiscoverServiceExternalUri
     https://autodiscover.xxx.org/Autodiscover/Autodiscover.xml 
    I get an error that says
    "a positional parameter cannot be found that accepts argument '-AutoDiscoverExternalUri'.
    Can someone point to me what I am doing wrong with the command and whether I should be concerning myself with adding that line? By the way the
    InternalUrl information is already configured on the system. Also should I edit the certificate to add autodiscover.xxx.org?
    Thank in advance for your support.
    TD
    TD

    Hi Tapera,
    Thanks for the question.
    SRV record is a good idea. You can set the SRV to
    https://web.abc.com/autodiscover/autodiscover.xml but you must make sure the
    url can be resolved from External clients.
    In addition, there is still a issue. It is hard coded that Outlook will find the autodiscover by the orders below:
    1. Access autodiscover via SCP in AD.
    https://web.abc.com/autodiscover/autodiscover.xml
    2. If SCP access fails, it will try:
    https://abc.com/autodiscover/autodiscover.xml
    3. Then
    https://autodiscover.abc.com/autodiscover/autodiscover.xml
    4. Local XML file
    5. SRV record
    As you can see, Outlook will try SRV record at last. Therefore, it will still try to access
    https://autodiscover.abc.com/autodiscover/autodiscover.xml each time you run Outlook. Then the certificate warning will still persists.
    I have a workaround solution. You can do a local policy to disable the autodiscover to access the
    https://autodiscover.abc.ocom/autodiscover/autodiscover.xml by:
    1.   
    On the Outlook client machine, open regedit and add the following key:
    HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\Autodiscover
             "ExcludeHttpsAutodiscoverDomain"
             "ExcludeHttpsRootDomain"
    2.   
    Then set the value to “1” on the above two keys.
    Thanks,
    Simon  

  • Exchange 2010 - The name on the security certificate is invalid or does not match the name of the site

    Scenario - Two Domains in different forests in production
    Domain ABC.com - Contains Exchange Server 2010 + Windows 2008 R2 AD Domain controllers
    Domain XYZ.com - Windows 2008 R2 Domain controllers + Contains all users + Desktop compuer accounts.
    User logs in to the domain XYZ.com from a desktop and he configures outlook using the user ID in  domain ABC.com.
    When he opens Outlook it is getting connected and he gets an error message pop -up saying 'The name on the security 
    certificate is invalid or does not match the name of the site'
    I am using an external certificate from Thawte for autodiscover.ABC.com & webmail.ABC.com
    I read about one solution provided in MS KB article - http://support.microsoft.com/kb/2772058 
    But in my scenarion there are two domain involved. Pls guide how to clear this.
     

    Hi,
    How about logon [email protected] on ABC domain via OWA?
    If OWA works well, it seems and issue on the Autodiscover side.
    Please run "Test E-mail AutoConfiguration" on Outlook to check whether this issue caused by Certificate Mismatch.
    1.
    Firstly make sure how many host name in your certificate the certificate. Run “Get-ExchangeCertificate | select certificatedomain”.
    2.
    Secondly, check the web services URLs which Outlook are trying to connect to. Run “Test Email AutoConfiguration”.
    3.
    In this scenario, you need to check the host name for the following services:
    Autodiscover, EWS, OAB, ECP, UM
    4.
    If any of the urls above does not match the one in the certificate, refer to the following article to change it via EMS:
    http://support.microsoft.com/kb/940726 
    More details to see following FAQ on "Checklist for Exchange Certificate issues":
    http://social.technet.microsoft.com/Forums/en-US/fa78799b-5c55-4c71-973b-0e186612ff6f/checklist-for-exchange-certificate-issues?forum=exchangesvrgeneral
    Thanks
    Mavis Huang
    TechNet Community Support

  • The located assembly's manifest definition does not match the assembly refe

    Hi,
    I am getting following error when i run my application.
    Error - Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.21, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
    When i copied Oracle.DataAccess.dll from the application server to my machine at that time also version complixct error is comming. Application server in 64 bit and my machine in 32 bit.
    Please help on this issue.

    Hey Thrik - I would like to know that whether you have resoved / identified the problem or not.
    I feel that root cause of this problem might be ODAC for .net
    Until I installed ODAC, it was working fine but after this, suddenly I am getting the below message in yellow screen.
    Pl. let me know if you also encounter after installing ODAC or ODP.
    Today, I also got the similar kind of error. (Below is the snippet of the page).
    Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.IO.FileLoadException: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess' could not be loaded.
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
    Stack Trace:
    [FileLoadException: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
    [FileLoadException: Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
    System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0
    System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +211
    System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +141
    System.Reflection.Assembly.Load(String assemblyString) +25
    System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +32
    [ConfigurationErrorsException: Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
    System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +596
    System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +3479081
    System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +46
    System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +177
    System.Web.Compilation.BuildProvidersCompiler..ctor(VirtualPath configPath, Boolean supportLocalization, String outputAssemblyName) +180
    System.Web.Compilation.ApplicationBuildProvider.GetGlobalAsaxBuildResult(Boolean isPrecompiledApp) +3446661
    System.Web.Compilation.BuildManager.CompileGlobalAsax() +51
    System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +462
    [HttpException (0x80004005): Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
    System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +57
    System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +612
    System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +456
    [HttpException (0x80004005): Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
    System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3426887
    System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +88
    System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +149
    Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42

Maybe you are looking for