HT2638 I click rebuild iphoto and it says its loading but its not working!

I click rebuild iphoto and it says its loading but i dont think is working. i have left it for a long time to load and it just keeps loading! HELP!!!

If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Similar Messages

Hi, I just updated my mac from version10.6 to 10.9.3 os mavericks. i went to open iPhoto and it says "Your photo library will not be readable by previous versions of iPhoto after the upgrade." does this mean I have lost all photos i had in there?

Hi, I just updated my mac from version10.6 to 10.9.3 os mavericks. i went to open iPhoto and it says "Your photo library will not be readable by previous versions of iPhoto after the upgrade." does this mean I have lost all photos i had in there? It does not give me a choice, it just says quit or upgrade? p.s. i didn't realise ther was a way to back up my computer beforehand, which i am guessing this is time machine?

1. No, you haven't.
2. Back up the iPhoto library(this can be done through Time Machine or by dragging it to a drive, partition, or disk image formatted as Mac OS Extended) and then click Upgrade.
3. Aside from Time Machine and drag-copying items from your home folder, programs such as the Disk Utility, Carbon Copy Cloner, and SuperDuper can make backups.
(108026)

When I go in to SYSTEM PREFERENCE and click on DESKTOP/SCREENSAVERS it says pictures loading but then I get that coloured circle and nothing else - I then have to force quit

When I go in to SYSTEM PREFERENCE and click on DESKTOP/SCREENSAVERS it says pictures loading but then I get that coloured circle and nothing else - I then have to force quit

Hi Mende 1
I have just tried what you suggested and it came up with - folder can't be found?

I can't open my itunes , i tried to delete it and install it back already but still not working , please help

i can't open my itunes , i tried to delete it and install it back already but still not working , please help

No , it is something crushed in my computer ? i keep re-download it and tried to download some old version itunes my computer is a Window 7 . i can't backup my iphone and ipad now pleses help , thank you

TS2755 When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please

When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please

Try closing all apps in Multitask Window
1. Double tap the home button to bring up the multi-tasking view
2. Swipe up on the screenshot of the app you want to exit.
3. The app will fly off the screen

Please hepl me. i m intergrating ejb3 and struts in two server. but is not working

it is simple application i m runing in tow server but i m get classsnotfound error pleas solve my problem. i will give my direct structure of application
i m runing ejb3 in weblogic 10.3 and struts in tomcat server. both communication is not happening pleas help me. i m try from many days. But is not working form me
root dir
onlyenb6
account class
package ejb3.onlyejb;
import java.io.Serializable;
import javax.persistence.Entity;
import javax.persistence.Id;
@Entity
public class account implements Serializable{
@Id
int accno;
public int getAccno() {
    return accno;
public void setAccno(int accno) {
    this.accno = accno;
public String getName() {
    return name;
public void setName(String name) {
    this.name = name;
public float getBalance() {
    return balance;
public void setBalance(float balance) {
    this.balance = balance;
String name;
float balance;
Int6_clss code
package ejb3.onlyejb;
import java.io.Serializable;
public interface Int6_cls extends Serializable {
    public void storing(int acc, String name, float amt);
Session.class code
package ejb3.onlyejb;
import javax.ejb.Remote;
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
@Stateless(mappedName="saigoud")
@Remote
public class Session_ben implements Int6_cls {
    @PersistenceContext
    EntityManager mrg;
    public void storing(int acc, String name, float amt) {
System.out.println("session="+acc);
System.out.println("sess="+name);
        account accs=new account();
        accs.setAccno(acc);
        accs.setName(name);
        accs.setBalance(amt);
        mrg.persist(accs);
build.xml
<project name="onlyejb5" default="saifile">
<property name="bea.home" value="C:/bea"/>
<property name="wl_home" value="${bea.home}/wlserver_10.3"/>
<path id="main.class.path">
<pathelement path="${bea.home}/modules/com.bea.core.utils_1.4.0.0.jar"/>
<pathelement path="${bea.home}/modules/com.bea.core.jarbuilder_1.2.0.0.jar"/>
<pathelement path="${java.class.path}"/>
</path>
<target name="saifile">
<echo message="***ANT Script should run from inside the ${wl.home}/server/lib *****" />
<echo message="***** ********* ********* *****" />
<java classname="com.bea.jarbuilder.JarBuilder">
<classpath refid="main.class.path"/>
<jvmarg value="-d ${wl.home}/server/lib -jar wljarbuilder.jar"/>
</java>
</target>
</project>
after run with ant i get successfully create wlfullclient.jar
i m taking this wlfullclient.jar and pasting in tomcat lib directery and run webapplication
my webapplication code
package ejb3.onlyejb;
import java.io.Serializable;
public interface Int6_cls extends Serializable {
    public void storing(int acc, String name, float amt);
package ejb3.onlywed;
import java.io.FileInputStream;
import java.io.IOException;
import java.util.Hashtable;
import java.util.Properties;
import javax.ejb.EJB;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
import ejb3.onlyejb.Int6_cls;
public class Action_cls extends Action {
        public ActionForward execute(ActionMapping map, ActionForm fm, HttpServletRequest req, HttpServletResponse res)
    throws IOException{
        String respkey="fails";
        Action_form_bean bean=(Action_form_bean)fm;
        int ac=bean.getAccno();
        String na=bean.getName();
        float bal=bean.getAmt();
        System.out.println("accno="+ac);
System.out.println("na="+na);
System.out.println("bal="+bal);
System.out.println("enter in to if loop");
           Hashtable p=new Hashtable();
p.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory");
p.put(Context.PROVIDER_URL,"t3://localhost:7001");
        System.out.println("jndi properties nuderprocess");
           try {
System.out.println("loading p file="+p);
            InitialContext ic = new InitialContext(p);
System.out.println("loading p file over="+ic);
        System.out.println("jndi file is loaded");
      //System.out.println("wrs="+wrs);
System.out.println("entry in try block");
Int6_cls wrs=(Int6_cls)ic.lookup("saigoud#ejb3.onlyejb.Int6_cls");
       System.out.println("lookup susfull");
          wrs.storing(ac, na, bal);
    respkey="ok";
          } catch (NamingException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
        catch (Exception e) {
            // TODO: handle exception
        ActionForward fw=map.findForward(respkey);
        return fw;
get error
accno=44
na=hjhjhj
bal=777.0
enter in to if loop
jndi properties nuderprocess
jndi properties nuderprocess22
loading p file={java.naming.provider.url=t3://localhost:7001, java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory}
loading p file over=javax.naming.InitialContext@12f9bcd
jndi file is loaded
entry in try block
Jul 5, 2013 1:36:22 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet action threw exception
java.lang.ClassNotFoundException: ejb3.onlyejb.Int6_cls
    at weblogic.ejb.container.deployer.RemoteBizIntfClassLoader.getClassBytes(RemoteBizIntfClassLoader.java:151)
    at weblogic.ejb.container.deployer.RemoteBizIntfClassLoader.loadClass(RemoteBizIntfClassLoader.java:96)
    at weblogic.ejb.container.internal.RemoteBusinessIntfGenerator.generateRemoteInterface(RemoteBusinessIntfGenerator.java:54)
    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.readObject(RemoteBusinessIntfProxy.java:205)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1846)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
    at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1945)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1869)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
    at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:197)
    at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:564)
    at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:193)
    at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:62)
    at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:240)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at weblogic.jndi.internal.ServerNamingNode_1030_WLStub.lookup(Unknown Source)
    at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:392)
    at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:380)
    at javax.naming.InitialContext.lookup(InitialContext.java:392)
    at ejb3.onlywed.Action_cls.execute(Action_cls.java:62)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:263)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:584)
    at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
    at java.lang.Thread.run(Thread.java:619)

Locking multipost.

TWO CRITICAL BUGS: 1) File, "Save Page As" and 2) right-click the picture and select "Save Image As", both do not work at all in Firefox 27, 28, and 29!

Note: capitals are used only to highlight important words.
PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
I am forced to revert to Firefox 26!
First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
---FIRST CRITICAL BUG:
When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---SECOND CRITICAL BUG:
When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
Please, make it a priority to solve these two critical bugs. Thanks.
I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.

First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

TS3276 my mail will not allow me to log out and mail on dock will not open it says try again and quit mail i do but does not work

can't get mail on dock to open when trying log off says quit mail and try again tried dozens of times quit mail try again but does not work

Pierre222,
Unfortunately you are not providing us with any useful information. We need to know what app you are using to email at the very least. However what I'd suggest you do is call AppleCare, you have 90 days of free telephone support (the number is in your owners manual) and they will be happy to assist you. They're open M-Saturday so you will need to wait until tomorrow.
BTW if you have not been exposed to these please bookmark them and begin using them. You may find your answer in one of the videos.
Switch 101, Mac 101, Find Out How Video tutorials & List of Useful URLs for switchers

My iPhone stuck on activation AFTER UPADATING AND FORCED RESTORE. and it say my apple id is not working to activate my phone, but i can access my apple id.

My apple id says cannt activate my phone after trying so many times. And i tried to login my icloud account then it say my apple ID is valid but not an icloud account. Its sounds weird for me. How come my apple id is not vaild for an icloud?
Im new in apple products.. So please let me know what should i do.
By the way my phone is not from stollen.. If ever im not able to fix this can apple service do, activate my phone? I only have box of the iphone 4s proof of receipt from a carrier in singapore because it is a plan but alredy finished in contract. Please give me some advixe. Thnx in advance.

Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario

Using right mouse click in bookmarks and selecting new tab or window does not work anymore in firefow 4.0. no new tab or window opens. Still works if you open new via File menu.

When you select bookmarks, find the bookmark you want, then right mouse button click you get a drop down menu giving you the chance to open a bookmark in a new tab or new window. This no longer works with firefow 4.0

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

I have been trying to switch on my i pod 5 and its not working i tried doing it with a charger in and holding the two buttons but it not working all it does is show a logo of i tunes and says its charging, what do i do, please help???

Help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

In a shared photo stream,the photo is pixelated and keeps saying that its loading but its been taking too long

When my friend posted me some photos;some of them loaded and some have stayed pixelated with a loading notification turning up an i wait for ages but nothin happens,can someone please tell me how to make them load faster or something

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
.- Reset network settings: Settings>General>Reset>Reset Network Settings
You will have to rejoin all wifi networks
- If still problem I suspect either an Apple problem or they got corrupted. has other recipients gotten the photos OK?

Download update of Lightroom cc and app says dowloaded successfully but is not downloaded

the desktop app tells me that LR cc has successfully downloaded but it has not downloaded onto my drive and thus will not launch

Hi Caleb. There are some troubleshooting steps for a similar issue listed here: Lightroom doesn't launch or returns "Develop module is disabled" error after 5.5 update Can you let me know if any of those solve the issue for you?

Flash player says its installed but is not working- please read

Hey everyone!
the past few days I have easily spent several hours working with my flash player. First- it was saying I needed to put in the latest version, so I did, it said it worked but when I tried to watch videos or play a game etc I got an error message saying I needed flash player 11. and I went through that process countless times. I restarted my computer, ran my virus software, etc. when none of that worked I just disabled and trashed ALL of the software I had downloaded since I had had the problem including my current flash player and adobe. Just now, I tried to install the flash player again. It seemed to work great- it said it installed and I clicked finnish... but, behold, I go to watch a video for school and I have the same problem. I tried to change the computer type to the otehr windows 7 option for the download, again it seemed to work fine and downloaded and told me it was finished... but I still can't view my video or do any games etc online. I have worked with the IT department at school and with family... no one can figure it out. it should be working as far as we are all concerned...but it is not and I have school work to do.
If someone could please help me I would much appriciate it! if this is a glitch with some adobe thing- PLEASE fix it asap. I have work to do!
Thanks!
Maggie

What web browser do you use? If IE, check
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

My Back and Forward buttons are present but do not work. How do it fix?

I have tried several fixes to no avail. The buttons worked until recently. Not sure when exactly they stopped.

Back/Forward Home don't work in 7.0.1 due to '''network.http.max-connection'''s being upped to 256, reduce back down to 32.
*https://support.mozilla.com/questions/889087
Back button problems -- right-click on tab for tab history, or hold a couple of seconds for tab history, or install an extension
* "'''Back/forward dropmarker'''" Extension<br>https://addons.mozilla.org/firefox/addon/backforward-dropmarker/
Extensions that may '''interfere with Back Button''', and these are already listed in [http://kb.mozillazine.org/Problematic_extensions Problematic extensions] for other reasons
*McAfee Site Advisor see [https://support.mozilla.com/questions/805964 805964] (update perhaps 3rd week July 2011)
*Yahoo Toolbar (https://support.mozilla.com/questions/845691)
Back/Forward: navigation/buttons are disabled -- http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
Back/Forward: buttons missing -- http://kb.mozillazine.org/Corrupt_localstore.rdf
see more complete answer in https://support.mozilla.com/questions/851574

HT2638 I click rebuild iphoto and it says its loading but its not working!

Similar Messages

Maybe you are looking for