HT3199 connect iTunes on new macbook to apple tv 1st gen. library

On my formar macbook I had iTunes to synch with Apple TV 1st generation.
After upgrading to a new macbook pro with iTunes 11.0.3 I observe following problem:
1. on apple tv 1st gen. the library from my old macbook is there but in light gray, i.e. not connected to new macbook
2. when connecting new computer to apple tv 1st gen. it will create a new library (instead of connecting with existing library).
3. in iTunes, Devices Apple TV, only buttons "Settings" and "Photos" appear on top of window. "Music", "TV-shows" are missing.
How do I connect the two libraries, i.e. iTunes library on my new macbook with library on my apple tv 1st gen (last synched with my old macbook)?

AppleTV 1 was designed to sync with a single computer, but apart from untransferred purchases made on AppleTV, the sync was to AppleTv only.
You cannot make the new computer sync with AppleTV without removing the old sync connection on AppleTV under Settings>Computers. Doing this wipes the AppleTV of content tomprepare tobsync with a new iTunes library.
AppleTV1 also allowed streaming only from several computers other than the synced one - content will appear under My Shared Movies and so forth when the computer is on.
you really need to remove both computer entries from the Computers settings screen then re-add the new iTunes as a sync library.
Hopefully you have still got the old computer to allow you to copy media to the new one, or have copies of he media somewhere.
If most of your stuff was from iTunes Store then you should be able to redownload in iTunes.

Similar Messages

Movies in my iMac's iTunes do not show up Apple TV(1st Gen)

So frustrated. Movies in my iMac's iTunes do not show up on my Apple TV(1st Gen) in the Shared Movie area. I've done the Media Type fix to "movie." I've re-started and re-booted and changed the Apple TV from ethernet to wireless and re-connected iTunes. Renamed the library. Everything's up to date. Grrr.

I have now restored Factory Settings on the Apple TV. Looked promising until iTunes hangs everytime I tried to enter the podcast page of the sync options. And I get errors that my newest movies, created in Final Cut Pro X with the Share with 720p Apple Devices export settings are not compatible with Apple TV.
Unbelievable.

After iTunes 10.3.1, my Apple TV 1st gen. can't see any shared iTunes libraries!

Ok, everything was working fine until iTunes 10.3 came into the scene. Post 10.3 / 10.3.1, my Apple TV 1st gen can't see any shared iTunes libraries...

Hello everyone
I have fixed it! The problem was that Apple TV had tried to connect to the computer so many times the Virus Barrier X6 had decided it was a malicious attack and blocked the IP address.
I fixed the connection by adding the IP address to a trusted list within the FireWall rules.
To do the same follow these instructions
Go to Virus Barrier X6.
Click the 'Anti-Vandal' Tab at the top of the screen.
Click 'Blocked Addresses'. Select the IP of Apple TV (you can find this IP address through your router software). Click the '-' sign at the bottom of the left hand column. If the Apple TV IP address isn't listed then you have a different problem!
Click 'Trusted Addresses'. Click the '+' sign at the bottom of the left hand column. Add the IP address of Apple TV in the pop up box, select 'permanent', add any notes you want to and then click 'OK'.
Turn on Apple TV and it should all be working fine (assuming that your 'Home Sharing' setting are all on and you are connected the the network!).
Hope that helps
M

Can u select a song in iTunes, and play through the Apple TV (1st gen)

I am trying to figure out if I can use a computer, instead of the iTunes interface, to play music though my stereo. I know you can do this with a Airport Express (but not the Extreme...#^**@#), for example, but I am trying to figure out if you can do the same with the apple TV (the old one). I would liek to be able to have my laptop anywhere and control what is p[laying on the Apple TV...
thx

Simple - using the Airtunes (renamed Airplay in iTunes 10) speaker feature you'd use to play to an Express, you just enable in on AppleTV Gen 1 and then choose the AppleTv as the speaker in iTunes.
This will only work for audio of course.
The Remote app on an iPhone/iPad should also allow you to control iTunes playback to an AppleTV as another option - at least Version 1 allowed thsi I've not tried yet with Remote 2.0 but think it still does.

ITunes looses photo sync settings for Apple TV (1st gen.)

Since the update to the new Photo app on my Mac, iTunes forgets the photo sync settings for my Apple TV (1st. generation, 160 GB HDD).
Every time I open the photo section of the Apple TV sync settings, all the options are turned off. Then I mark a couple of albums and sync the Apple TV >> all album appear on the Apple TV.
But after closing and re-opening iTunes in the photo settings everything is unmarked again. So on every following sync the photos on the Apple TV are easily erased :-( Resync them to the Apple TV takes hours (>30'000 photos!).
All the other sync settings in iTunes remain intact.
Environment:
- MacBook Pro Retina 15" with the latest SW (Mac OS, iTunes, Photo App, etc.)
- Apple TV 1st gen 160 GB HDD

Restarting iTunes resolves the issue in the majority of cases, if it doesn't my second guess would be your security software.
What really seems strange here is that there have been no updates since well before Xmas, so after initially setting it up, the first update would have brought you right up to the most recent (and indeed the very last) .
Agh, how silly of me, I see it's iTunes you have updated.
If that's about all you've changed, you might want to try reinstalling iTunes and bonjour.
Message was edited by: Winston Churchill

Apple TV (1st gen): how to free up space?

how do i delete some of the content to free up space for new content?, Apple TV (1st gen) : how do i delete some of the content to free up space for new content?

If you want more space or take certain things off then just manualy select what you want on it. I just check the shows I want on it the when I want them off I uncheck them and then resync he ATv to get them off etc.. Easy as pie....pi !
As for the purchased items not going away, scroll down to make sure that playlist is not checked on the computer under movies or shows etc...

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
thanks
larry

I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
Use what you have for a system backup or for secondary backup storage.
you might be able to take the drive - most cases allow you to open and swap drives - and use this:
G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive
or this:
http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

I have a Firewire 800 external hard drive and need to connect to my new MacBook Air. Where can I get the correct cable?

I have a Firewire 800 external hard drive and need to connect to my new MacBook Air. Where can I get the correct cable?

Apple has announced a Thunderbolt to Firewire adapter, but not yet given a release date.

ITunes requires new version of Apple Mobile Device Support....

Hi - I have just bought an iPod touch. I a;ready have a classic and a nano but as iTunes 9 was out I thought I'd upgrade to that before syncing the new Touch. However now I get the error:-
iTunes requires new version of Apple Mobile Device Support. Please uninstall both Apple Mobile Device Support and iTunes, then install iTunes agan.
So I did this following the procedure on the Apple Suport pages which referenced exactly this error message but from an earlier version (7 I think) of iTunes).
Basically, I used control panel to uninstall all the bits (including iTunes, Apple MDS, Quicktime and Bonjour) in the order it says. Rebooted, checked that program folders and files had really gone, downloaded a fresh copy of iTunes and installed - exactly the same error.
My Classic syncs fine. The Touch also syncs fine on a laptop I have on which I have iTunes 9.01 at the moment. The Touch is being detected because I get the USB conect sound and the error message in iTunes pops up as soon as it is connected.
The Apple Mobile Device Service is running (it was not running when I checked staright after the install, but I manually started it (it is set ot Auto start)) using .exe version 2.12.36.0
PC is a Windows Vista 64 running iTunes 9.02. The iTunes pack I downloaded was called iTunes64Setup so I'm guessing its the right one.
I always seem to be tearing my hair out when I get a new iPod or new iTunes. Not much left now so has anyone got any ideas?
Thanks very much,
Stuart

Found the solution in my case. I followed the Apple uninstall procedure again:-
http://support.apple.com/kb/HT1925
and found that the Apple Mobile Device Support did not uninstall properly. I needed to download an MS utility called Windows Installer Cleaup Utility
http://support.microsoft.com/kb/290301
(there was a post somewhere on here about it so thanks to that person).
When I rebooted, I found however that the Mobile Device Service was still installed and running and the installed files were present in C:\Program Files (x86)\Common Files\Apple.
So I Stopped the service (Control Panel, Administrative Tools, Services, Right click on the service and choose Properties, then click Stop. For good measure I also set it to Disabled (overkill) using the dropdown which will probably say Automatic when you look at it.
Then I found a Microsoft utility called SC.exe which is available in the Windows resource kit and can also be found here:-
http://www.petri.co.il/downloadfree_reskittools.htm
This is a command line tool, but easy to use. Unzip the sc.zip file, place sc.exe somewhere handy where you can find it from a command prompt and then open a command line (Start, Run..., type "cmd" Enter). Go to the folder where you put sc.exe and type the command:-
sc delete "Apple Mobile Device" (you need the quotes).
This deletes the service from the services list in the registry (you can check by closing the Services box and opening it again).
Now go to c:\Program Files (x86)\Common Files and delete the folder and subfolders called Apple.
OK - should have given your system a full clean out.
Then reinstall iTunes.
That was easy - but I guess I can forgive Apple for not being able to upgrade a version of iTunes without messing up - it's only version 9.0 after all, I'm sure it'll be OK in the next release. Seems like they're learning some tricks from Microsoft.
You folks in the US and Canada are luck however because you can get some help with this stuff. There's no help from Apple if you're in the UK.

How can I get an itunes movie from macbook to apple tv via airplay, how can I get an itunes movie from macbook to apple tv via airplay

how can I get an itunes movie from macbook to apple tv via airplay?

You don't use Airplay. You set up Home Sharing on both and under the Computers section of AppleTV you'll then find it under Movies (or Rentals if rented), assuming it's in a compatible format.
AC

HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed Ahmad

Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed

When I got my new macbook air, apple downloaded my photos on my new laptop from my old laptop, but now i have duplicates photos because when I started icloud, I got duplicates. How can I delete duplicate photos?

when I got my new macbook air, apple downloaded my photos on my new laptop from my old laptop, but now i have duplicates photos because when I started icloud, I got duplicates. How can I delete duplicate photos?

HI ..
On the new MBAir, open System Preferences > iCloud
Deselect the box next to Photo Stream then reselect it then restart your Mac.

New iTunes videos won't sync with Apple TV (1st Gen)

I have two Apple TVs (1st Gen) that have been working wonderfully. I've had no problem in the past downloading videos from iTunes even as recently as a month or two ago. However, after upgrading both my OS (10.8.2) and my iTunes (10.7) my most recent download (a series subscription) won't sync. I'm ruling out a problem with the Apple TVs specifically as it is happening with both. The message I'm getting is "[SHOW] could not be copied to Apple TV because it cannot be played on this Apple TV". This is the same message I get whether trying to sync the HD (720) or SD version. Thoughts?

You can re-download SD content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer, uncheck the preference to download HD in the bottom right corner.

Apple TV 1st Gen can no longer connect to wireless networks

My Apple TV (1st Gen) has recently lost the ability to connect to either of our wireless networks at home. I rean the diagnostics at the reset screen and the Apple TV says it is performing normally. In the settings, whenever I attempt to connect to a wireless network, I am now only offered "Other..." as a choice. Proceeding to the next screen, I enter the name of the network closest to the Apple TV -- an Airport Extreme set up for 5 GHz that this Apple TV connected with daily up until 2 days ago. The Airport base station is perfoming normally, as my MacBook Pro can see it and establish a network connection without any difficulty. The issue is limited to the Apple TV. I did a Factory Restore, and now when I go to Wireless Network > "Other..." > Enter the name of the wireless network" the resuit is always the same, and error message stating: "There was a problem connecting to the network. Check your settings and try again. (-4)".
This message comes up almost immediately, without requesting a WiFi password -- suggesting to me that this Apple TV has lost the ability to connect to ANY wireless network due to a hardware failure.
Q: Has anyone else in the Support Community had a similar experience with their 1st Gen Apple TV, and if so, did you find a solution to it?
Note: When I first noticed the connction to this Apple TV had gone stale (greyed out in the iTunes Airplay Speakers list), and prior to doing the Factory Restore, I could play back iTunes content stored on the hard drive, but could not connect to the local wireless networks. I noticed that the Apple TV was running very hot -- it has alwasy run pretty hot to the touch.
If this Apple TV has died, I will get a 3rd Gen Apple TV, but wiill then have to work through the HDMI to Composite video + Audio issues, as this Apple TV is connected to our older (non-HDMI) TV.

Follow-up: Able to connect with ethernet cable, downloaded software updates, connected to iTunes, and synchec content.
Next, disconnected the ethernet cable. ATV1 froze and was restarted using the Menu + ( - ) combo on the remote. Re-ran diagnostics yeilds: Apple TV is working fine.
Restarted, then went to configure the Wirelss settings. Apple TV once again does not show either of the two wireless networks. Selecting "Other..." and entering the SSID yields the same immediate response:
"There was a problem connecting to the network. Check your settings and try again. (-4)"
No change on the wireless front :-( Bummer.
Looks like an ethernet connection is the only option left to continue using this Apple TV 1st Gen.
Thanks for your help. -- Paul

Apple TV (1st Gen) no longer appears in iTunes 10.

Hi there, my Apple TV (1st Gen) no longer appears in itunes 10.
I have looked at as many of the forums as I can and I have followed all the advice to reset Apple TV, router and PC. No joy. I have then restored Apple TV, uninstalled and reinstalled itunes, checked router ports etc. but still no joy.
The Apple TV is connected to my network just fine (I can download movie trailers etc.), my PC is connected to the network just fine (itunes store opens and I can shop). However, the Apple TV does not appear in the devices list on the LHS of the itunes window, there is no Apple TV tab in preferences and I cannot locate my library (not listed) on the Apple TV.
Basically I have tried everything I can find to try to solve this, but no joy. Please can someone help me as this is driving me crazy?

If you've reset AppleTv, have you actually set up the sync/share computer again?
If not go to Settings>Computers and add a new library - a 5 digit code will appear for you to enter in itunes.
The top computer entry in the list syncs and streams, the others only stream. If you plan to purchase anything make sure you have an entry for sync/stream as streaming only libraries may not transfer AppletV purchases.
AC

HT3199 connect iTunes on new macbook to apple tv 1st gen. library

Similar Messages

Maybe you are looking for