HT3255 i have macbook air 13,3" but when i go to:From the Apple () menu, choose About This Mac. Click More Info. For OS X Mountain Lion, click System Report. MacBook Air 11 inch mi 2011, why why please
i have macbook air 13,3" but when i go to:From the Apple () menu, choose About This Mac. Click More Info. For OS X Mountain Lion, click System Report. MacBook Air 11 inch mi 2011, why why please
Informations matériel :
Nom du modèle: MacBook Air
Identifiant du modèle: MacBookAir4,2
Nom du processeur: Intel Core i7
Vitesse du processeur: 1,8 GHz
Nombre de processeurs: 1
Nombre total de cœurs: 2
Cache de niveau 2 (par cœur): 256 Ko
Cache de niveau 3: 4 Mo
Mémoire: 4 Go
Version de la ROM de démarrage: MBA41.0077.B0F
Version SMC (système): 1.73f66
Numéro de série (système): C0*******JYC
UUID du matériel: ****
<Edited By Host>
Similar Messages
-
I have looked everywhere for this but cannot locate "From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced Menu" Please help!! I have been on every iTunes store menu and cannot find "Authorize This Computer"
On your Computer...
Open iTunes...
If you're using iTunes 11 click on the box icon in the top-left corner to see the " Show Menu Bar "
and from the Menu Bar select Store...
From the Store menu, choose Authorize This Computer.
When prompted, enter your Apple ID and password, thehen click Authorize. -
i did follow "From the Apple menu, choose System Preferences. Choose View > Time Machine. Set Time Machine to On if it is off "
. .....but i couldn't find the time capsule from airport utility..... why?Are you using a new 802.11ac Time Capsule - the "tall" one - and are you still using Mac OS X 10.6.8?
You need OS X 10.7.5 "Lion" or later, or an iOS device, to configure an 802.11ac Time Capsule:
http://manuals.info.apple.com/MANUALS/1000/MA1645/en_US/airport_time_capsule_802 11ac_setup.pdf
See page 12. -
MacBook Pro won't stay asleep with external monitor attached. When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds. This only happens when using the external monitor. Does anyone have any suggestions?
Mine does that too. The worst thing is when it goes to sleep, then wakes up and keeps running while the lid is closed and it is wrapped up in a case. I am afraid when the hot weather comes it is going to burn up. I am hoping Apple fixes it in the software or they may have a melted MBP to replace.
Then when I open the lid it is crashed running at fill tilt, pumping out heat to beat the band. I am forced to hold the button down and reboot.
I wiped my hard disk and reinstalled my OS, but it didn't help. I reversed my OS to 10.5.0 and it solved the DVI problem but still won't sleep. This post will probably be deleted by Apple, they did it a few days ago. I just don't know what to do, and I consider myself a real Apple expert. Just hoping you realize you are not the only one. -
I have successfully deauthorised my old computer but a unable to authorise my new machine. I have followed the instructions but there is no option on the store menu to 'Authorise this computer'. Please help!
There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them: -
I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?
A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
(121465) -
My icloud activation lock is on my iphone, which requires an activation login to access the homescreen, but when i log in with the apple ID on the phone, it says the apple ID is not meant to unclock this iphone 5 ios 8.0.2. please help me solve this.
Yes the phone belongs to me. It was purchased from United Kingdom Vodafone to West Africa, i had to factory unlock to use any sim in it. so it belongs to me. I did the activation myself, now after updating my iphone to the latest update, it required a user id and password to activate the phone, but anytime i enter the details, it tells me the user Id is not correct but the password is correct..
-
I am having problems gettting my mail to work ... Mac telling me that my start up disk id full and to delete some files to free up space ... have done this but when i open mail from the dock it just brings up the colour wheel and nothing happening ... it shows when you right click on the mail icon that " application not responding"
If your hard drive is getting full, you need to free up, at least, 20 GBs of space on your iMac's hard drive.
If your Mac is running a fairly recent version of OS X, here are some general guidelines.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it run the automatic ans S.M,A.R.T. tests, then go to the cleaning and maintenance tabs and run the tabs that have the ability to clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck! -
I have recently migrated data from Windows PC to Macbook Pro 13in.running Yosemite. On booting the macbook now the account with the migrated data can only be accessed via the Apple menu. Is this normal ?
Open the Users folder on the internal drive, drag all of the other home folders to the desktop, and then move the files inside to the desired locations.
(91949) -
My Power MAC G5 has a peculiar problem. The monitor fails to report until the machine is started and shut down 5 or 6 times. Once it has booted it can be restarted without incident from the Apple menu. I have swapped out all of the hardware. Monitor, Memmory,Video Card and reset the PRAM. After resetting the PRAM it booted on the first attempt and I thought it was solved. But the next day it was back to starting and stopping until the Monitor came on. Does anyone have a suggestion? Thanks
It could be a bad PRAM battery corrupting your PRAM. Typically when I have monitor issues on startup it is a bad PRAM battery.
Texas Mac Man's PRAM, battery, PMU tutorial - https://sites.google.com/site/macpram/mac-pram-nvram-cuda-pmu-battery-tutorial
Apple's PRAM reset directions - http://docs.info.apple.com/article.html?artnum=2238
If you have a digital multimeter you can check the condition of your present battery. It should read at least 3.2V if it is the 3.6V half-AA battery type. A new battery provides 3.67 Volts DC. A bad battery provides under 3.2 Volts DC. Ideally this should be measured while the battery is under load; added recommendation from Hans777:
>I have recently found out that an exhausted battery will still indicate >3.6 V with a high internal resistance VM.
>
>Checking incircuit: powercord disconnected press PMU reset button for >about 5 sec before measuring.
>
>Checking outside: load the battery with a 1500 Ohm resistor when measuring.
Alternatively, test the battery while it is still in the computer.
If the battery is more than 5 years old, especially if you totally disconnect the computer from the power regularly, or have left it unplugged for several months at one time, it is likely the battery is dead.
Sometimes you have to do a more intensive reset of hardware management:
[Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3|http://support.apple.com/kb/HT1939]
[How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005)|http://support.apple.com/kb/HT1436]
[iMac G5: How to Reset the SMU|http://support.apple.com/kb/HT1767] -
I received an email from the "apple team" saying that my mac may have been exposed to spyware and wants my passwor, user id, etc. Is this authentic?
I doubt that apple team sends this kind of emails. At the best, they may ask you to change your password, but not to reaquest to provide one.
-
My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?
mrdctaylor wrote:
Since I updated to the latest/greatest version of the software I can no longer put my Apple TV to sleep by holding down the middle button.
Thanks!
Apple have changed this setting with the Apple TV Software Update 5.1:
About Apple TV (2nd and 3rd generation) software updates
Feature
Summary
Shared Photo Streams
Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
AirPlay
Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
iTunes account switching
Save multiple iTunes accounts and switch quickly between them.
Trailers
Search movie trailers. In the United States, see show times for local theaters.
Screen savers
New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
Main menu
Reorder icons on the second page by holding down the select button on the remote.
Subtitles
SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
Network configuration
Support for setting up advanced network options using configuration profiles. Seehttp://support.apple.com/kb/HT5437 for more information.
Stability and performance
Includes general performance and stability improvements.
If you don't like this, you can leave feedback here: Apple Feedback -
when I am on a phone call in my car I can play and hear my iPhone music thru the car speakers but when I hang up from the call, the sound reverts to my iPhone speaker and longer plays thru the car speaker.
Hello, Jordanali.
Thank you for visiting Apple Support Communities.
I understand that your car will not resume playing music after accepting a call. Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Get help using your iPhone, iPad, or iPod touch with your car stereo
http://support.apple.com/en-us/HT203412
Cheers,
Jason H. -
Installation: hello, I am trying to install my adobe elements twelve. I have a serial number, which contains no letters (only numbers), from the box. I use a mac. When I try to install it, it says it's unable to validate my serial number. I have already checked the spelling. What should I do?
Does it begin with 1057? If not, it's a redemption code. In which case, see here:
Redemption Code Help
If it is a serial number, go to system preferences>security & privacy>firewall>firewall options and be sure that PSE is allowed to call out. -
I bought att-locked but contract-free iPhone 4 from the Apple Store in the mall
Over 9 months ago i bought att-locked but contract-free iPhone 4 from the Apple Store in the mall.
Now i live in Costa Rica so my question is can it be unlocked?You CANNOT legitmately unlock the AT&T iphone at all.
AT&T does NOT unlocl any iphones at all.
They clearly state this on their website.
"iPhone cannot be unlocked, even if you are out of contract."
http://www.att.com/esupport/article.jsp?sid=KB82027&cv=820#fbid=bQwQp9j4ANP
Maybe you are looking for
-
X48 platinum LGA 775 mboard will only post in safe mode
I recently had a problem with my power supply (helped out by members of this forum) and have since changed it. Then the stock cpu cooler seemed to be playing up as the system would only post every tenth (or so) attempt. I therefore went out and purch
-
Delivered Drill-Down functionality in PeopleSoft 9.1 ..
What type of functionality comes delivered with eCompensation around generating detailed summary reports with "drill-down" capabilities? What would have to be enabled? What kind of skill sets would be needed? Thx.
-
External Authentication Half Working
I'm having a strange issue with external authentication and PHP. I've got the PHP code set up correctly (I believe) and I pass the authentication token to the Flex application via flashvars and when the application loads the roster pod shows everyone
-
Hi SAP Gurus. Below is small requirement for SO... when an SO is prepared in SAP for a particular customer whose forms have not been received it should prompt a message of pending form along with details of outstanding forms and liability thereon, if
-
I was following a technet article on creating a new tab for special access requests on the SR form. I successfully imported the new form however everytime a new SR is created, the form defaults to the new tab. when we select a different tab, we are n