HT3275 My new Time Machine isn't backing up. I now get this message ..."Time Machine couldn't complete the backup to 'Marks Time Capsule'. The backup disc image "/volumes/Data/Mark's Mac Book Pro.sparsebundle" is already in use. *** does that mean?
Hey, my new Time Machine worked a treat for the first couple of days, but now I get a "sparsebundle is already in use" message. Also, the original 153gb backup seems to have disappeared! Any clues with how I can deal with this?
Just reboot the whole network.. restart modem .. router/TC.. clients with 2min gap.
This is the most common problem reported here with Mountain Lion.. although you didn't fill in the profile. ML??
Check also the ML discussion are for Time Machine problems.
Apple made a dog's breakfast of it.
Similar Messages
-
Why am I getting this message and why will my Time Machine not complete the backup and how do I correct this?
Reboot.. pull out the power plug.. push the power plug back in after 10sec.
Reboot whole network.. same as above.. but do it for everything..
ie turn everything off.. computer, TC, router -Mode.. whatever.. every single computer device in your home.. off.. not in standby.. not in sleep.. off.
Power up.. Modem... wait 2min
Power up.. Router/TC... wait 2min
Power up.. Switch, AP any other network equipment... wait 2min
Power up.. computers, iphone, ipads etc.. ie clients...
Everything should now be working. -
MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image “/Volumes/Data/Jerry Booher’s MacBook Pro.sparsebundle” is already in use." error when Mac Pro tries to back up
It is standard Mountain Lion error due to the networking ability which is comparable to wet string. (actually that was lion.. it dried out some with Mountain Lion.. higher in the hills perhaps!!)
See C12 and C17
http://pondini.org/TM/Troubleshooting.html
But many people are suffering the same issue..
And the above is even a little out of date.. you might need to do a reset to the TC.
Welcome to Apple's beta program for everyone. -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
I have a time capsule that I use for my apple computers. My iMac has no problems but my Mac mini keeps getting this error for backups:
The backup disk image “/Volumes/Data/JIP’s Mac mini (2).sparsebundle” is already in use.
What do I do?Please shift the focus of your eyes to the right side of this page to find the heading of More Like This. There are multiple answers and solutions there.
-
I noticed today that my last back-up was this a.m. and it has tried several times to back up since but I keep getting this message
Time Machine couldn’t complete the backup to “TimeCap”.
The backup disk image “/Volumes/Data/ MacBook Pro ."sparsebundle” is already in use.
I have never had this problem before and don't know what to do. I am not that great around computers so if anyone can help I would appreciate it. I did try to do some research but could not understand any of the content I read. I sure don't know what "sparsebundle" is and this is the first time I ever heard the term.
If anyone can help woold appreciate it.
I have Version 10.9.1This is a standard issue..
Been around since LION but you missed out.. !! Well the old rule applies.. there are three types of Mac users.
1. The bugs have bitten you, and you have done the work arounds.
2. The bugs are biting you and you are now trying to find out what is going on.
3. The bugs will bite you. And in the meantime you laugh at everyone with problems and say it must be all their fault. Doesn't happen to my system.
You were simply in the last group.. now, with the wonders of mavericks to help, you got bit.
The solution is simple.. unplug the power cord from the TC .. count to 10.. power up the TC again.
No luck look at the more technical help.
C12 here. http://pondini.org/TM/Troubleshooting.html
Your naming might also be an issue if this continues to happen.. see C9. -
Hello, I get the above message when trying to back up to time machine. It worked previously. I have done the usual things (switch off & on etc). Any ideas?
Thanks!What router are you using? I got the same problem on and off when I was using a number of brands of WiFi routers. Until one day, I heard that non-Apple routers don't support Bonjour and it makes TM backup unstable. I tried using an Airport router (Express, Extreme and Time Capsule), the backup became stable, in long term.
Is it the solution to your problem? Give me feedback. -
time machine back up not completed due to backup disk image "/volumes/data/.....imac.sparsebundle" is already in use. How do I fix?
Pull the power cable from the back of the Time Capsule
Wait a few minutes
Insert the power cable back in the back of the Time Capsule
This will fix the problem 90% of the time. If no luck, see #C12 in this great support document by Pondini:
http://pondini.org/TM/Troubleshooting.html -
The backup disk image “/Volumes/Data/Bill Smith’s iMac 1.sparsebundle” is already in use.
Yes, standard ML error.. about 10 posts a day here.
Reboot the TC.. reboot the whole network in correct order if that doesn't work.. modem.. tc.. clients.
Read C12.
http://pondini.org/TM/Troubleshooting.html -
I'm using the newest Time Capsule (2T) and I just got this error.
The backup disk image “/Volumes/Data-1/James Kranz’s iMac.sparsebundle” is already in use.
It has been running fine (so it think) since I got it a few months ago.This is your Time Machine backup image on your Time Capsule or other networked storage device that you are using for your backups. To clear this problem, try restarting your Mac, but if that does not work then restart your backup device. Doing these should clear the process that is usiing the bundle, and allow your Mac to properly attach it for use.
-
I keep receiving the following backup disk image "/Volumes/Data/my MacBook Pro sparsebundle could not be accessed (error -1). How do I fix this? I had just updated some software and am afraid something hurt the time machine.
See #C17 in Time Machine - Troubleshooting.
-
This message keeps appearing and my time machine is not backing up. What is the reason and how can I fix this?
Maybe this will shed some light on the problem: The Backup disk image ... sparsebundle ... is already in use.
OT -
my time machine will not back up and i get this message: /Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use....i have tried multiple fixes but still unable to back up
If you have tried the fixes in Pondini's Time Machine Troublshooting, specifically #C12 and nothing helps, then it is time to let one of the genius types at an Apple Store take a look.
http://pondini.org/TM/Troubleshooting.html
If you cannot take the Time Capsule to an Apple Store, contact Apple Support directly.
http://www.apple.com/support/contact/ -
I can select a disk (Time Capsule) and initiate the backup. It only "waits to back up" then "making backup disk available" and remains frozen there. I tried to update the software a while back and was unsuccessful, I think that may be the issue.
Any insight would be greatly appreciated. This is the error message I receive.
TIME MACHINE ERROR: The backup disk image “/Volumes/Data/Sean McGuire’s MacBook Pro.sparsebundle” could not be created (error 1).
ThanksSee #C17 in Pondini's excellent support document Time Machine - Troubleshooting
http://pondini.org/TM/Troubleshooting.html -
I get this error message when I try to back up my laptop:
' Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. "
Anyone know how to fix it?Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think.
Maybe you are looking for
-
VPN in a local network connected to another free network (wrt54gl)
Hi, The schem is the next: I want to connect my laptop to my house local network throught VPN, in my house I have another router that will be connected in a free network throught an antenna. I would be interested in mount a VPN and see the free netwo
-
How do I set up out of office replies in mail.
I am trying to set up an out of office automated reply for next week and can not seem to find a way of doing this. Could any one advise me how best to achieve this? Thank you in advance...
-
Using a treemap for lookup in a jsp grid
Hi I am trying to use a treemap to lookup the names for id´s in a table. for example. Lookup table: ID.....Name 1......carrot 2......bananna the main table looks like this:
-
Painting in a thread without offscreen image
I'm trying to develop a good map viewer with java. Now, painting a map can be a very long task, and the requirements for a good map viewer should be: * the user can see progress, that is, the map is painted incrementally on the screen, not offscreen,
-
hi all, i get the following error after transport on Q system: "No object type found for this message; check the activation of the corresponding process" the trace gives me this explanation: "could not create BPE proxy for message, no XML object defi