HT3275 My time machine is sending me messages that the disk image is "already in use" as the reason it can't complete a backup. What gives?

My time machine is sending me messages that the disk image is "already in use" as the reason it can't complete a backup. What gives?

That is our most common error.. ever since Mountain Lion came along with its inability to remember beyond a few hours. where the devices are located.. and so forgets to dismount properly.
Look at the right hand.. More Like This.
A simple restart fixes it. ie pull out the power cord.. count to 10.. plug the power cord back into the TC.
More details C12 here.
http://pondini.org/TM/Troubleshooting.html

Similar Messages

I get a message saying backup failed on my Time Machine because backup disk image is already in use. I am the only one using this machine.

My Time Capsule keeps telling me that backup failed because backup disk image is already in use. I'm the only one using this machine.

Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes, then try a backup

Time Capsule says .sparsebundle disk image is already in use

I recently moved, which of course meant unplugging my Time Capsule and transporting it. Now that it's set up at the new place, I keep getting error messages telling me my MacBook Pro can't backup because the .sparsebundle disk image is already in use.
How can I clear this up and get back to my hourly backups?

I hope it wasn't backing up when you unplugged it.
The usual method is just a power cycle of the TC.. in your case that might not be enough.
Try power cycling the whole network. restart in correct order. modem.. TC.. client computers.
Otherwise check C12 here
http://pondini.org/TM/Troubleshooting.html

I cannot get apps from the itunes store and there is a message that this apple id has not been used with the itunes store

i cannot get apps from the itunes store and there is a message that this apple id has not been used with the itunes store

I have the same problem and when I review my account and enter my cc info it tells me "Your request is temporarily unable to be processed. Please try again later." and this is day 5 of trying again later. What the **** is the prob? It isn't the card bc it has plenty of $$$ on it.

HT201250 Why time machine returns an error message that says "unable to open version"?

I am using Neat for Mac (a scanner software), but it looks like time machine is not doing the backup for it. Every time I open time machine and I have that application opened time machine shows a message that says "unable to open version". Does anybody know what this mean?
Thanks

No, sorry I haven't heard of it.. but there are several softwares around that cause TM issues.
Is the scanner on the network? Or are you backing up to a USB drive and the scanner is also plugged in by USB.. Expect issues anytime you have an application that is going to take control of the port that TM requires for the backup..
It might be easy to solve by simply using another device that plugs in differently.. ie FW800 disk instead of USB.. or instead of Time Capsule if it is network issue.
Or simply buy a different backup software. Since Mavericks.. Time Machine is troublesome.. that is far from the only backup choice.. or even the best one.
Carbon Copy Cloner is my current favourite.. but others are certainly readily available and doubtless work fine.

I have an error message:Time Machine couldn't complete the backup to Time Capsule. The backup disk image is already in use.

I'm a single user, no Airport, and the Time Machine has been backing up nicely for several months. Recently, I've been getting the above message. Any help is appreciated.

Restart the TC. If that doesn't work, do as follows.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Time Machine error message: The backup disk image is already in use.

Hi,
Everytime my Time Machine tries to perform a backup I get the following error message: The backup disk image “/Volumes/Data/Celine Gauld’s iMac.sparsebundle” is already in use.
I'm not very tech-savvy and certainly don't know my way around the Mac that well. Any suggestions as to how I go about solving this?
Thanks.

Welcome to Apple Support Communities
Restart your iMac and Time Capsule. In most of cases, this should solve the problem. If it doesn't work > http://pondini.org/TM/C12.html

My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to set my new one up is that the Apple ID is already in use. How do I set up with our shared e-mail account

My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to initiate setup is that the Apple ID is already in use. Any ideas on how to complete the setup of the new iPad since we both share the e-mail account?

If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other.

Reinstalling Design Premium 5.5 on a Mac - error message "Install" can't be opened. You should eject the disk image.

Trying to reinstall Design Premium 5.5 on a Mac OSX 10.7.5 - once downloaded to my computer it will not install due to error message "Install" can't be opened. You should eject the disk image.
Thanks

no, redownload using a different browser from prodesigntools.com
if you follow all 7 steps you can directly download a trial here: Download Adobe CS5.5 Trials: Direct Links (no Assistant / Manager) | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Firefox 8.0.1-4.dmg - downloads - could not be opened. Quick Time Layer cannot open files in the "Disk Image" Format - What do I need to do?

I get the above message when I try to download Firefox updates.

That is a disk image file and you can't open that in an application.
<br />
Make sure that Firefox gets installed properly.<br />
Open the Firefox disk image (DMG) file with a double-click if necessary and drag the Firefox program to the application folder on your hard drive.<br />
You shouldn't double-click the Firefox application to run it from the disk image, but drag it out of the DMG folder instead.
* https://support.mozilla.com/kb/Installing+Firefox+on+Mac
* http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X

HT3275 Has anyone come across the red "i" message saying "The backup disk image "/Volumes/Chris...(the last bit being) iMac.sparsebundle" is already in use? This has prevented my time machine from backing up from this morning (5th Dec 2012).

Has anyone come across the red "i" message saying "The backup disk image "/Volumes/Chris...(the last bit being) iMac.sparsebundle" is already in use."?
As of yesterday (4th Dec 2012) everything was fine, no trouble or problems at all. Wake up this morning, turn on the computer and when it came time to backup itself, the message occurred above and this has prevented my time machine from backing up from this morning (5th Dec 2012) ever since then.
Everything on my computer is up-to-date but this problem still persists displaying this message practically every hour, on the hour and nothing is getting backedup!
If you know what is going on and more importantly, how to fix this, I would be indebted to you for sharing your knowledge with me on this subject.
Thank you.

Welcome to the Apple Support Communities
See > http://pondini.org/TM/C12.html

I've been getting the error message "The disk you inserted was not readable by the computer". I can't open system preferences, disk utility, or Time Machine. I'm guessing it has something to do with my external hard drive, although it hasn't been touched.

I've been getting the error message "The disk you inserted was not readable by the computer". I can't open system preferences, disk utility, or Time Machine. I'm guessing it has something to do with my external hard drive, although it hasn't been touched lately, but I can't figure out how to solve the problem. Any suggestions? Thank you!

Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
Thanks

My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What should I do?

My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
Thanks !!
Alain

Could that read " . . . could not access . . ."? If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here.

HT3275 Error: Time Machine couldn't complete the backup to (drive). The backup image (volume).sparesebundle is already in use.

I have rebooted in Mountain Lion (all updated)on my MacBook Pro and keep getting this error:
"Time Machine couldn't complete the backup to (drive). The backup image (myvolume).sparesebundle is already in use.)
I have a 2TB time machine with about 240GB left. Any ideas?
Thanks, Jeff

Please look over to the right side of this page under the heading of More Like This for multiple answers and solutions.

HT3275 Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

I thought the backup whilst asleep was only used on Mountain Lion.. but perhaps it was also introduced with Lion.. anyway it is only enabled on later firmware.. in latest laptops.
http://reviews.cnet.com/8301-13727_7-57480490-263/mountain-lions-powernap-featur e-requires-firmware-update/
A quick google finds all sorts of info.. remember google is your friend.

HT3275 My time machine is sending me messages that the disk image is "already in use" as the reason it can't complete a backup. What gives?

Similar Messages

Maybe you are looking for