HT3554 Is there any way to enable my iMac to use an external mic after I have found that it is not compatible? Via some kind of device or upgrade?

I'm trying to use my Apple headphones a mic on GarageBand. After about an hour of researching, I've found that my iMac (Mid 2007) is not compatible with an external audio input/microphone. Is there any way I can make it so I CAN do this, maybe by installing some kind of software or doing an update or something? I'm a song recorder on a budget so these headphones are all I got for a mic. PLEASE HELP!!!!

AckFun wrote:
Ok so should I buy a USB mic then?
Check out the mics at Apple's Online store by clicking the store tab at the top of this website.

Similar Messages

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Is there any way to download all previously purchased audiobooks and tv shows after a complete dataloss

Is there any way to download all previously purchased audiobooks and tv shows after a complete dataloss, my ipod is not updated and I have lost everything?
Thanks
Rus

Chris, I certainly don't mind additional questions and postings.
I believe there are many issues with Apple Loops and Logic that need to be resolved and people need to be aware of that. Unfortunately, in opposite to the old "german" version of Logic , there's no lifetime tech support, you can't even call and ask the question after 60 days , which isn't right for a professional software of this level, especially considering the fact that many things still remain vague in Logic even for developers and tech support people!( believe me, I've called and asked!)
Issues like that need to be resolved over the phone with the company, period!
One thing I also learned over the years as a Mac OSX user, if something doesn't work, don't mess with it. Delete your drive and re-install everything. This is very frustrating , I know, but unfortunately this is the only way to deal with OSX issues, if you got a problem with your system, don't try to fix it. It's never gonna be the same again. I know , it's off the topic a little bit, but if your content is missing from the system files, before installing your new Logic, back up your important files, wipe up your drive and clean install Mac OSX , run updates and then install the Logic. Most likely , everything will be in it's place, at least 90% or more. I gave up trying to make two system in my house to be compatible 100% , but it's OK if they're 90% or more identical. I spent enormous amount of time trying to find out what's missing and where, I visited most of the forums and there's no clean answer.
Message was edited by: Moderator

Is there any way to turn off data and use only wi fi

is there any way to turn off data and use only wi fi, going to a foreign country and do not want to use data but wi fi will be available. I want to be sure to use only wi fi

Yes there is!
Simply go into Settings, General, Mobile Data, Turn this off and make sure Data Roaming is also switched off! You can have wifi on and this will no charge your account for the data you use via Wi-Fi!

Is there any way to enable eventlog replication between two nodes in windows 2008 failover cluster.

Is there any way to enable eventlog replication between two nodes in windows 2008 failover cluster.
Thanks Azam When you see answers please Mark as Answer if Helpful..vote as helpful.

Hi,
As far as I know there don’t have the log replica function between failover cluster node, if you want to have the Unified log management you can refer the following related
KB:
Configure Computers to Forward and Collect Events
http://technet.microsoft.com/en-us/library/cc748890.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Qosmio G20: Is there any way to enable FM radio?

Is there any way to enable FM radio reception on Qosmio G20. Any hardware upgrade or accessories?

You would need to attach some sort external fm tuner. Some usb tv cards have fm radio as well, so you might consider this if you want an additional tuner.
I use a Haupauge WinTV USB2, which also has an fm tuner. If you want to use this with Media Centre there are specific drivers on the Hauppauge site that set this up a second tv tuner within Media Centre, and also give you fm radio in MC.
Alternatively if you use the drivers that come with it you can use as a stand alone tv tuner and fm radio player.

Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled. As most of these are classical, it is inappropriate to have them separated into songs that play any old time. Can I restore them to the original albums?

Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled into individual 'songs'. As most of these are classical and folk, it is inappropriate to have them separated into songs that play any old time (ie, a movement from Beethoven's 5th symphony followed by a folk song followed by one excerpt from Vivaldi's Four Seasons, etc. Can I restore them all to the original albums and make sure the shuffle doesn't happen again?
Thanks!

goldberry wrote:
Thanks! That has worked, but only partially - there are still some Beethovens mixed in with the Vivaldis. I'm sure I installed these as total albums.
I have noticed that too from time to time, I generally move the files into the correct folder and fix the index in itunes when one won't open, occasionally.

Is there any way to get around having to use iDVD to burn DVD?

Is there any way to get around having to use iDVD to export FCE to DVD?
I've been trying to burn a FCE2 sequence to DVD. A friend of mine told me all I had to do was put a blank DVD in, click on the icon on the desk top, export the sequence to Quicktime and drag the QT sequennce into the DVD icon and click burn.
Well something happened! But there's nothing on the DVD!! What am I doing wrong? I loathe iDVD. i don't want to author. I just want to burn the project on a DVD. Please advise. Thanks.
Chuck
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)
iMAC 1.25 GHz PowerPC G4 Mac OS X (10.3.1)

If you export a sequence at full resolution to can burn it onto a DVD as a data DVD, but this is for transportation purposes only. At full resolution the DVD, especially as it fills up, will not have sufficient throughput to sustain good playback of the material. That's why the material is encoded into MPEG-2 for DVD authoring. If you want to make a DVD for set-top playback it has to be authored to include the DVD format structure. There is no way around that. If you don't like iDVD, take a look at Final Cut Studio, you might prefer DVD Studio Pro. Or you might what to look at Roxio's Toast. It has basic authoring capabilities. Personally I don't think direct playback hardware solutions (except for seriously expensive ones) produce acceptable quality, but that's just me.

Is there any way to generate Gantt chart by using oracle 9iDS?

Is there any way to generate Gantt chart by using oracle 9i reports builder
Can you please send me the link or more information on oracle 9iDS.
Thanks

Hi,
Oracle9iDS itself doesn't support creating Gantt charts. The option oyu have is to use Oracle Graphics 6i, because there is no Graphics in 9i, and configure it to run with Oracle9i Forms. There exist a whitepaper at otn.oracle.com/products/forms that explains how to make Graphics 6i work with Forms 9i.
Frank

Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails?

Only an exclamation point shows up when I click a thumbnail in my iphoto folder. Is there any way to recover these photos by using the thumbnails? Please help. Thanks!

That exclamation mark is displayed when iPhoto cannot link to the original file. First make sure you are running a "managed" library by checking iPhoto's Advanced preference pane to make sure the checkbox to copy files into the library during import is checked.
Click to view full size
If it is checked you can try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Recorded a video in portrait mode and want to switch it to landscape mode is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone

is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone or if you start in portrait and go into landscape while recording

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

IS there any way i can make something appear on the external screen or use the camera or microphone?

IS there any way i can make something appear on the external
screen or use the camera or microphone?

Hi. Sorry, but isn´t this something that has been around forever?
Regards
Lars @ søgemaskineoptimering

I have a mac OS 10.8.2 and I want to download office mac 2008 however it is a cd rom and my comp doesnt have a cd rom. Is there any way to still download it without buying an external disk drive?

I have a mac OS 10.8.2 and I want to download office mac 2008 however it is a cd rom and my comp doesnt have a cd rom. Is there any way to still download it without buying an external disk drive?

Yes, if you have access to another computer with an optical drive. You can connect the two computers via your home network and use File Sharing to transfer the installer to your HDD. You can also use:
DVD or CD sharing- Using Remote Disc
Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks

Is there any reason that my lock keeps unlocking in my network settings? Is there any way to keep it locked? It sure is inconvenient when I have to reboot to get back on the internet and re-lock that lock.

Is there any reason that my lock keeps unlocking in my network settings? Is there any way to keep it locked? It sure is inconvenient when I have to reboot to get back on the internet and re-lock that lock.

You could try changing the settings in System Preferences/Security & Privacy/General/Advanced/Require an Administator password to access locked preferences
But this will affect all Preference settings.

With just ONE inatentive sweep of my finger one page of my note was disappeared! Is there any way it can be recovered without using the help of iCloud backup?

1. With just ONE inattentive sweep of my finger one page of my note disappered. Further more, the same page in my iPad was deleted automatically too! How could this happen? Is there any way it can be recovered without using the backup feature from iCloud? The data is vey important to me?
2. I havn't connect the power code to my iPad yet, the backup copy in the iClout was before the accident as I checked in iPad. Is there any way that I could open my notes in iCloud backup so that I can copy the missing page and move back to my iPad and iPhone?
Thanks a lot for any help!
Xueyu

Sorry, no. The only way to restore this note is to restore from a backup that contains it.

HT3554 Is there any way to enable my iMac to use an external mic after I have found that it is not compatible? Via some kind of device or upgrade?

Similar Messages

Maybe you are looking for