HT3669 After update the printer HP Deskjet F300 Series stopped working properly

I would like to notify you that i use drivers for HP Deskjet F300 Series Version 1.0.1 and after this update the version upgraded in version 2.0.0 and the printer stopped working properly. I removed from library all folder of HP drivers and then i re-install old version from .dmg file from this official link of HP and now it works properly again.

Hi ds5710,
I understand you have a Deskjet F300 series printer that is currently telling you it's offline and won't print. I will certainly do my best to assist you in resolving this issue.
If you're using Windows, I would suggest you start by downloading and running the HP Print and Scan Doctor as it should be able to rectify whatever is causing your printer to show as offline.
If that doesn't resolve your issue, or you're using a Mac, please get back to me with which version of Windows or Mac that you're using and I will certainly see what else we can do!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

After updating to 8.3 so many apps dont work properly. Any body else got this?

After updating to 8.3 so many apps dont work properly. Any body else got this?

This is truthfully a WAG but here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

HT4623 after updating the iOS6 my iPhone 4 is not working

after updating the iOS6 my iPhone 4 is not working

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

After updating to 10.7.3, Airport Utility Stop Working

Hi,
After updating the 10.7.3 combo update, when I apply the Aiport Utility 6.0 update, it told me that a "unexpected error occurred". From that point on, the Airport Utility on my Mac is no longer functional. every time I launch the app, nothing happens, the icon don't even bounce on the dock.
Any suggestions?

Just tried to open Audio MIDI Setup. And I got an error
Process:         Audio MIDI Setup [368]
Path:            /Applications/Utilities/Audio MIDI Setup.app/Contents/MacOS/Audio MIDI Setup
Identifier:      com.apple.audio.AudioMIDISetup
Version:         3.0.4 (3.0.4)
Build Info:      AudioConsole-95011000000000~1
Code Type:       X86-64 (Native)
Parent Process: launchd [123]
Date/Time:       2012-02-02 23:51:13.199 +0400
OS Version:      Mac OS X 10.7.3 (11D50)
Report Version: 9
Interval Since Last Report:          4261 sec
Crashes Since Last Report:           3
Per-App Interval Since Last Report: 7 sec
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      AB2C7EFF-D9AD-43AC-BDB2-87E54719531A
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000105100008
VM Regions Near 0x105100008:
    MALLOC_TINY            0000000105012000-0000000105100000 [ 952K] rw-/rwx SM=ZER
--> STACK GUARD            0000000105100000-0000000105101000 [    4K] ---/rwx SM=NUL stack guard for thread 2
    Stack                  0000000105101000-0000000105183000 [ 520K] rw-/rwx SM=COW thread 2
Application Specific Information:
objc[368]: garbage collection is OFF
There is no sound in system at all.

After updated iso7 to ios8.1.1, iphone stop working. What to do?

I updated iOS 7 to iOS8.1.1 of my Iphone 5s through itune in my PC. After updating, the phone stop working. Why?

Please define "stop working".

Printing on HP D7500 series / Stops working after auto update of driver

I have OSX Lion.
Apple Software Update automatically updated the drivers a few days ago for my HP Photosmart 7560 printer. It now does not print. Printer que now says "sending data to printer" but nothing happens.
Attempted:
Turning off and on, empty que, etc.
Checked connections, switched USB cable.
So...
I deleted the driver, and went back to "add Printer" to get a new one. It says "finding software" and returns that the "software for this printer is currently unavailable".   It was working fine under lion until it automatically updated a few days ago and it's a pretty recent printer.
Plan B: I went to HP's website to manually download a driver. They state that the driver is available only thorough Apple software download.   I can't download it from HP.
Ideas anyone?
Kevin

Pierre,
Thanks for the 10.6 driver info, which I just tried.   The HP installer said it installed successfully, but the printer is not appearing on the printer list. It looks like the drivers on Lion need to be installed through printer update, and I am not going to be able to manually install a driver. I was hoping this would be the solution.
Paul,
I already deleted the driver, and did the reset as you mention. Off/On/Reset often does fix things.
The problem I have is that Software Update returns that the driver is not available, although both Apple and HP say it is, and can only be obtained through Software Update.
need a little System D...
k..

TS2634 My iPhone 4s does not ring for incoming calls. Ring tone is set/settings/sound. It used to ring. I think it has to do with updating to IOS 7.0.4? After updating IOS 7.0.3 my microphone stopped working. Had to clear/reload.

My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?

Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion. There should be a row of icons at the top of a grey field. if the quarter-moon icon is bright white, tap it. If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

HT2188 i have iphone 3 and when i updated the software my sim card as stopped working, pls what can i do

i just updated my iphone_3, and my sim card has stopped working, i tried to restore and it kept coming back with erorr mrssage, what can i do

An iPhone 3G cannot be updated to 5.1.1; the last version supported is 4.2.1. So if you managed to get 5.1.1 on it through some means that bypasses Apple's protections you have wiped out your phone.

What makes the Print Screen and End Buttons stop working?

I am 3 weeks into the trial period. Twice before, the Print Screen (manual capture) and End buttons stopped working. The only way I found to correct this is to uninstall and reinstall the application. Am I doing something wrong, or is this a bug?

More information on this issue: When I start recording in any mode, one screen is captured. No other screens are captured during execution on program functions, menu selection, navigation, etc. Once again I removed and re-installed the application. This time it made no difference.

Please help, after update the bluetooth and wi-fi doesn't work in my iPhone 4s

If somebody knows how can I fix this. The bluetooth dont activate and wi-fi is in color gray. I already restore the iphone several times and nothing! The worse thing is that I cant go back to previos iOS.
PLEASE, HELP!!

Hello,
so yesterday I went to the Apple store (yeah, again) and they said that iOs 6.1.2 made the wifi chip overheat and that iOs 6.1.3 was supposed to fix this wifi problem (but once your wifi option has grayed out your phone has to be changed)... So they gave me a new phone and I've no problem so far. The wifi works very well, as before!

After update my software in mobile iphone 5 stop working

Dear All,
I m stuck after software updated my iphone5, when its reboot my iTuns give a error your phone could not be restored because of error (9). you can see in picture....
Kindly Regards Aware143

Hi aware143,
If you are having an issue with updating your iPhone's version of iOS, I would suggest that you troubleshoot using the steps in this article -
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

After update to 24.4. Thunderbird doesn't work properly, login to server takes about 20 minutes

Can't contribute much more than what my question is - Windows 7, Thunderbird always working perfectly until update 2 days before.
See others have this problem too, there's some bug in 24.4.
One connected to server, it still works slowly, sending messages takes 10, 20 seconds, looking for new ones the same, before it was just ... wooosh!

If you restart windows in Safe mode with networking, does the timing improve?

After update to 10.8.5 HDMI sound stops working after sleep mode

Has anybody a solution or the same problem?

This is not just a Mac Mini problem. I've found comments from people with all kinds of Mac, with any kind of external sound device, who all have this same issue.
The common factor is Mountain Lion.
Apparently there is a new build (12F42) which is supposed to fix this.
http://www.gadgetguide4u.com/new-os-x-1085-build-number-12f42.html
Apple released it to their employees on the 25th Sept.
Yet they don't even seem to have told their support people about it. My local apple store replaced my Mac Mini just on Sunday, because they didn't know why it was behaving like that. Needless to say, the new one has the same problem.
Here's hoping that build is available soon ...

What can I do if after syncronising iCloud with MS Outlook MS Outlook stops working properly ?

After installing iCloud Control Panel and synced iCloud with Outlook I cannot open Outlook/ What's the problem ?

iCloud hosts the calendars on its server and your various computers read them from there. The protocol for doing this is called CalDAV.
Outlook for Mac has not been equipped with the programming for CalDAV and therefore cannot access iCloud calendars. Outlook for Windows evidently has and can.
This is something only Microsoft can rectify and you could send them feedback suggesting they do this with all convenient speed.
Outlook on a Mac can only access calendars living under 'On My Mac' and these cannot sync with iCloud. iCal can sync with iCloud provided you have 1-.7.2 or higher.

"The Toshiba Firmware Linkage Driver has stopped working properly" - Windows 8.1

How to solve the problem for
Laptop Toshiba Satellite L 300
thanks & best regards

Which Satellite L300? There is a label on the bottom.
-Jerry

HT3669 After update the printer HP Deskjet F300 Series stopped working properly

Similar Messages

Maybe you are looking for