HT4113 i forgot my password to log into my phone

how do i get acess to my phone if i have forgotten my my passcode

Be sure to read the If you have never synced your device with iTunes, or you do not have access to a computer section of the article kb195 posted.
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

Similar Messages

I forgot my password to log into my MacBoook Air

I forgot my password to log into my MacBoook Air, using OSX 10. Rats. I was told that I can reset the password by opening and using password utility from OSX recovery and that there is an article on Apple support that will tell me how. I looked and can't find the article. Can anyone suggest how to do this? I am stuck on my Log In screen feeling silly about resetting my password to keep my kids off of the computer - and then forgetting the password.I am pretty sure I have the latest version of OSX - 10.7 - on the computer. As a first time user I would also appreciate someone letting me know if I posted in the right Community.

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Hi forgot my password to log into my mac air

what can I do ?

if you set up your mac woth your apple id and your mac is running lion or newer you can reset it with your apple id. if you enter your password incorrectly 3 times you should a message saying "if you forgot your password, you can reset it using your apple id". click the arrow-in-a-circle icon to bring up the reset passsword dialog. enter your apple id password and click reset password to proceed.
here is the article and it may not work but the article might tell you
support.apple.com/kb/ht4798

HT4528 Forgot password to log on to phone, is there any way to reset?

Forgot password to log on to phone, is there any way to reset?

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

My computer just shut itself down and upon restarting it now will not accept my password to log into my computer desktop

My computer just shut itself down and upon restarting
it now will not accept my password to log into my computer desktop
How can I reset my password!!

This Apple article has some possible solutions.
Best of luck.

I can't remember my password to log into my macbook pro. Help?

I can't remember my password to log into my macbook pro. Help?

First, make sure caps lock is not on.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on

What's the Default Password for Logging into huawei switches?

I was wondering if I bought the Huawei switches,
what’s the Default Password for Logging into them? so many people may have the same question that if bought a Huawei switch, what's the default password for logging into the switch? and maybe different kind of switches have different kind of passwords,
so maybe all of us wanna know them clearly.
Here, i'll tell you.
As for the bootrom default code:
Huawei S9300 V100R006 and the earlier version is 9300
Huawei S7700 V100R006 and the earlier version is huawei
And you can log into
http://www.huanetwork.com/blog/whats-the-default-password-for-logging-into-huawei-switches/ for more information, really useful.

Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question
in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSE: Data Platform & Business Intelligence
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

HT4113 How do I reset my password if I forgot the password to get in the phone?

How do I reset my password if I forgot the password to get in the phone?

If you are referring to the 4-digit passcode: IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen.

HT201210 hai.can i check with u..i forgot my password..n its stated phone disabled n connect to itunes..so how do i continue from here..n is my data still in my phone..thanks

hai.can i check with u..i forgot my password..n its stated phone disabled n connect to itunes..so how do i continue from here..n is my data still in my phone..thanks

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Hi i hv iphone 5 i got frn my uncle from kuwait n now m using it in india...i dont hv bill n i forgot icloud password...in my phone find my phone is on..nd i dont know the password...can i update it to ios 8..pls guide me as m new used of iphone than

Hi all its anir again...pls guide me the updating process OTA in my iphone 5 ..as i forgot the password..and find my phone is on..n dont hv icloud password...can i update it to ios 8 widout icloud password. ...
N tes can i reset it..

without the password you have a brick not an iPhone.

I have an apple i phone that is disabled because cant remember the password to get into the phone i was told to sign into i tunes to be able to unlock my phone. i have i tunes i get into on my i phone but can not get into it on my computer??

i have an apple i phone that is disabled because cant remember the password to get into the phone i was told to sign into i tunes to be able to unlock my phone. i have i tunes i get into on my i phone but can not get into it on my computer??

Hey grandkids7k,
Thanks for the question. The following resource provides troubleshooting information if you have forgotten your passcode:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the Connect to iTunes screen.
5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Thanks,
Matt M.

I've just upgraded to iPhone 4S and restored data from my old iPhone through iTunes. I'm being asked for a password to get into my phone and the old password I had doesn't work. I don't know what password it's looking for

I've just upgraded to iPhone 4S and restored data from my old iPhone through iTunes. I'm being asked for a password to get into my phone and the old password I had doesn't work. I don't know what password it's looking for

Thanks for replying, I'm a real techno-cretin. What do you mean by not using the backup? I'm busy trying to restore my new phone and it's doing a 6 hour download with updates. Can I restore the data from my old phone backup onto the new iPhone 4S when the download is done?

HT4528 Forgot password to log into phone.

Help! I changed the passcode to get into my phone and now I have forgotten it! Now my phone is locked and I need to get into it ASAP. How do I do that?

See this support document for help with your problem. http://support.apple.com/kb/ht1212

Lost my username and password to log into print and share on my printer

i cant access my eprint and share on my printer hp envy 5532. i have forgotten my username and password.
This question was solved.
View Solution.

Hello scoobby,
Welcome to the HP Support Forums!
I understand that you are trying to log into the ePrint and Share app that is installed on your ENVY 5532. I suggest that you log into your HPConnected account, delete and re-install the app. Doing this should prompt to assign new login information. Once uninstalled, restart the printer before re-installing the app.
Let me know the out come, cheers!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Error 3194 when trying to restore ipod touch...my daughter forgot the password and logged in too many times...now its disabled:(

Hi
My daughter forgot her password after mispla cing her ipod for 3 weeks. I tried to restore after it went into disabled mode. I get an error 3194.
Some help would be appreciated.

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

HT4113 i forgot my password to log into my phone

Similar Messages

Maybe you are looking for