HT4259 How to you extend my existing network using an AirPort Express?

My current configuration is a Linksys wireless router that I'm connecting to the AirPort Express via Cat. 5 cable. Only get a flashing yellow light. Help.

I got it working but here is the deal. It is not intuitive; you have to set it on "Create a wireless network", not "Extend a wireless network". You use extend a wireless network when you do it all wirelessly when the signal from the base is strong enough. But since I couldn't reach my wireless network to boost it, I had to use the cat. 5. So I guess it does make sense since I'm going from my WAN by cable to creating a wireless network. For some reason I thought it was going to be seamless with my existing wireless network so therefore I was extending my wireless network. Wrong. Thanks for all your suggestions as I think I would have quit long ago without you help.

Similar Messages

How do I extend a wireless network from one Airport Express to another?

I have an Airport Express in my living room, wired into my router and it's currently outputting a wifi signal.
I just got another Airport Express, and I've plugged it into my kitchen.
How do I use Airport Extreme Admin Utility to see the other Airport Express (which currently has a solid orange light), and label it as "Kitchen", so that I can have music playing in my kitchen as well?
I really don't want to have to wire an Ethernet cable all the way to the kitchen so that it picks it up, because I don't have room for that sort of hook up on my router.
Is this possible.. and if so.. could someone kindly, please, write me a step by step tutorial as to how to add my "kitchen" to the wireless network.
Thank you.

Try temporarily connecting via Ethernet to the AirPort Express (AX). After you configure the AX you can disconnect the Ethernet connection.

HT1515 extend a wireless network using my airport express

I bought an airport express back in 2006 with my macbook. I recently bought a time capsule and am now using it as my wireless router. Can I use my old airport express to extend / boost my wireless signal throughout my house? if so how?

Check the label on the side of the AirPort Express to see if the version that you have includes the feature to "extend" a wireless network.
If it does, you will see Model No A1264 there.
If you see A1088 or A1084, unfortunately this version of the Express does not have the ability to "extend" the wireless signal using wireless only.

How do you extend the guest network on a time capsule to an apple express?

I have a time capsule in my main house with a password protected guest network i set up an apple express in the guest house to extend the networks. Unfortunately the guest house / apple express is only amplifying the main house network. I would like my tenant to join the guest network from apple express. Is that possible?
How do you extend the guest network on a time capsule to an apple express?

I would like my tenant to join the guest network from apple express. Is that possible?
Sorry, but Apple does not allow the Guest Network to be extended in any way.

How can I extend my wireless network using Airport Express and an Airport Extreme on BT Infinity?

I have BT Infinity and I am using the Time Capsule with Airport Extreme as my router. Working well (even on wireless). I want to extend the wireless network with an Airport Express, but I cannot work out the settings necessary in Airport Utility. I am using Mountain Lion 10.8.2 on a Mac Pro. Please help!

BT,
I've read several of your posts, thanks for taking the time to share your wealth of knowledge.
I'm in a situation similar to the one described by 'scoutusmaximus'. Seeking the flexibility of a standalone router, I finally upgraded my 4-yr old ATT DSL gateway (modem+router) to a Comcast standalone modem + the ASUS RT-AC66U: http://www.asus.com/Networks/Wireless_Routers/RTAC66U/
Typically, I stick with all things Apple but the ASUS router seemed fairly superior to the current-gen base station (on paper, anyway; time will tell when it comes to performance) so, for once, I jumped ship. My plan was to extend the ASUS wired/wireless network using my TimeCapsule and 2 Airport Expresses in bridge mode, however, a google search turned up several unhappy customers that claim those devices don't play well with non-Apple routers, especially when it comes to 'extending' a network.
Questions:
1. Can I successfully extend the wired/wireless network created by the ASUS router using the 3 airport devices listed above w/out negatively impacting performance? I'd rather have 1 wireless network as opposed to creating a new wireless network with the TC and then extending it with the AP Expresses... though I'd consider that option down the line if it came to that.
2. Will the LAN ports on the TimeCapsule remain functional?
Btw, my house is wired so, I can reach all 3 devices via ethernet cable coming off of a central, managed switch. Supposedly, you only lose the LAN ports on the TC if you extend wirelessly.
Any advice would be appreciated.

HT4259 I have a Netgear wndr3400 and I can "join a wireless network" but can not "extend a wireless network" on my Airport express. Does anyone know why?

I have a Netgear wndr3400 and I can "join a wireless network" but can not "extend a wireless network" on my Airport express. Does anyone know why?

Sorry, but "Extend a wireless network" is a proprietary Apple setting that will only work if you have another Apple router.
It is not compatible with devices from other manufacturers.

How do you reset a forgotten passcode on an Airport Express?

How do you reset a forgotten passcode on an Airport Express? I cannot find where I saved the passcode and need to add a new non-Apple device to the network. I'm guessing that I will have to reset it and setup the network again, but do I unplug the network cable before or after pushing the reset button?

You can put the Express in "soft reset" mode by depressing its reset pushbutton momentarily - about one second. This will lower its shields for two minutes, long enough for you to use AirPort Utility to reset its wireless network password. There is no need to disconnect any cables when you do this.
Or, you can retrieve your existing wireless network password from a Mac you normally use on that network.
Read the following to determine how to retrieve your password from Keychain:
Your wireless network password is stored in your Mac's Keychain.
You must first have an Administrator account on a Mac that you use with that AirPort Base Station, one that is used to connect to your AirPort network.
On that Mac, open the Utilities folder. Find Keychain Access and launch it.
In the search field at the upper right, type Airport. All the Keychain entries for your base station will appear there, as well as other entries.
Look at the column "Kind". The entry you want to select will be labeled "AirPort network password" (not "AirPort base station password" or anything else).
If you are trying to recover the AirPort Base Station password then the entry you want to select will be labeled "AirPort base station password"not "AirPort network password".
Double-click that, and in the window that appears check the box for "Show password".
You will get the following window:
In the Password field type your Mac's Administrator password - the same one you used to log in to that Mac.
Then, click Allow, and your wireless network password will appear in the "Show password" field:
Make note of it.
Close the window, then quit Keychain Access.

Creating a wireless network using several Airport Express(es)

I would like to connect three AirPort expresses to my Sky Broadband router to create a new wifi network in my house. My router is in the basement and is connected into a hub which provides ethernet to the house. I would like to connect the AirPorts via ethernet to the router and create a single wifi network.
Can someone please tell me if this is possible and what settings the AirPorts should have. For instance, should I just extend the sky network using each AirPort or should I create a new network with one AirPort and then extend that with the others?
Many thanks
Terry

If each of the AirPort Express devices will be connected using Ethernet, you would configure them all exactly the same except for assigning different device names...AX1, AX2, AX3, etc.
Each Express will be configured to....
Create a wireless network
Same wireless network name on all devices
Same Radio Mode
Channel set at Automatic
Same wireless security setting
Same wireless network password
Very important....configure each Express in Bridge Mode
Post back if you need more details

HT4259 How can I extend a wireless network from a 2Wire modem by usingan Airport Express? Years ago I could do this just by plugging in the (old) Airport Express. TIA Travelmonger

How can I extend a wirelss network from a 2Wire modem using an Airport Express? Some years ago using the old Express I was able to do so simply by plugging on the Express witha minimum of tweaking. Still the same?
TIA
Travelmonger

Still the same?
Unfortunately, no.
Apple's newer "Extend a wireless network" feature was designed to only work with other Apple products, so it would be extremely unlikely that it would work with a 2-Wire device if you plan to extend using wireless only.
If you plan to connect the AirPort Express to the 2-Wire device using a wired Ethernet connection, the Express can be configured to provide more wireless coverage that way.

How can I extend a wireless network with my AirPort Extreme Base Station?

Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
-MacUser

The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

Extending an Network Using Powerlines & Airport Express

Apologies for the rather long winded question - however I am hoping that there is a fairly simple response.
I have just moved into a new house with very thick walls. The wifi signal (from a BT HomeHub (2??)) router makes it around the majority of the house - except the dining room where we plan on using the macbook the most.
I thought i could solve this problem by buying a Belkin Powerline and an Airport Express. The ultimate aim is to use the Airport Express both as Airtunes device and also as a device to extend the wireless network in the dining room.
My current set up therefore is the phone line connected to the BT router; router connected to the powerline socket via an ethernet cable. In my dining room (where there is no wireless signal) I have the other powerline socket connected to my Airport Express. Having gone through the set up process, Airtunes works well, broadcasting from the mac to my stereo via Airtunes. However it is clear that i am unable to connect to the internet using the mac in my dining room - suggesting that the Airport express is not extending the wifi signal (if i plug the macbook into the powerline socket directly using the ethernet cable then the internet works fine).
My question therefore is, given the above device set up, how can do i set up my Airport Express so that I can connect to the internet AND use Airtunes in a room that is outside the range of the BT base station, but is connected to the internet via a Powerline?? Ideally the wi-fi signal provided by the Airport Express would be the same as provided by the BT Box so that I can wander round the house picking up whichever source is the strongest. Is this possible??
thanks in advance and apologies again for the long winded question!
many thanks
Paul

Hi can someone help me please....... I am new to this and as such couldnt even find out how to post a new thread..... sorry i am not into IT thats why I buy apple cos I dont normally have to think : )
Here is my issue. I ahve just moved back to the UK and into my old house, I have a BT homehub installed as they were easiest and fastest to get online with, the airpot in my Imac works fine with it and within twenty feet everything esle connects fine too, my issue is my apple tv simply cannot find the network, I have tried extending the range with everything, Belkin etc and then someone suggested airport express. Nothing seems to work but at least airport express tells you why and apparently the why is because my homehub will not let its network be extended ? BT now tell me that this is true !!!! now I am stuck in a contract with BT with a homehub that doesnt reach my apple tv that cannot be extended by airport express ? is this really true or can someone help me please, please . I have read the post above and just want to know if the airport express needs to remain pluggedinto the router via ethernet ?? if so it is unlikely I can have the airport express unit much more than a few feet away from the homehub and if so how will this increase the overall range of the network ? over the existing home hub ? frustratingly my apple tv etc is the furthest possible point away from the hub and with several thick stone walls in the way which is obviously why I am having issues ? making the airport express a repeater in a mid point would be ideal but apparently this is not possible ?

Trouble extending my WiFi network with older Airport Express

Hi,
As the question states, I have an older Airport Express which I have dug out to try and extend my WiFi network in a new house.
I am on Virgin Media (fibre optic) in the UK and get a good WiFi service but one room in the house (which I have just turned into a cinema/media suite) has no reception.
I have successfully managed to 'create a new network' via the Airport Express and the signal strength is 100% but for some reason if I try to reconfigure the device to extend the existing network I get no improvement at all from the (zero) signal I was receiving before.
Am I doing something wrong? Or is there an additional step I am missing?
I could live with having a secondary network but what I would really like to achieve is Home Sharing from my main computer, so that I can access my photos, movies and music etc. from iTunes on the big screen. If the computer exists on another network my iPad, iPhone and AppleTV can't see/use the media from that room.
Many thanks in advance,
Colin

Are these the steps you used?
To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
Start with the device that will be configured as the primary Wi-Fi base station. Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
Configuring the primary Wi-Fi base station
Power on all 802.11n Wi-Fi base stations and allow them time to appear in the AirPort Menu Extra.
Open AirPort Utility (On a Mac, choose Go > Applications from your desktop, click the Utilities folder, then open AirPort Utility. In Microsoft Windows, choose Start > All Programs > AirPort to start AirPort Utility).
Select the primary Wi-Fi base station in the Base Station Chooser, then click Continue. Note: If you see a message appear that indicates that the Wi-Fi base station has been reset, click Cancel to continue.
Click Manual Setup. Enter the base station password if necessary.
Click AirPort in the toolbar.
Click Wireless.
Choose “Create a wireless network” from the Wireless Mode menu.
Select the “Allow this network to be extended” checkbox.
Enter a Wireless Network Name.
Optional: By default, Wireless Security is set to None so that no password will be required to join the network. We recommend you click on the Wireless Security menu, select WPA2 Personal, and create a password between 8 and 63 characters long.
From the Radio Channel Selection menu, select Automatic.
Click Update.
The next window may indicate that there are some problems. Resolve the problems, then click Update.
You are now ready to add extended Wi-Fi base stations to your network.
Configuring an extended Wi-Fi base station
Place any extended Wi-Fi base stations within range of the primary Wi-Fi base station
Ensure that all 802.11n Wi-Fi base stations are powered on and allow them time to appear in the AirPort Menu Extra
Open AirPort Utility (On a Mac, choose Go > Applications from your desktop, click the Utilities folder, then open AirPort Utility. In Microsoft Windows, choose Start > All Programs > AirPort to start AirPort Utility).
Select the Extended Wi-Fi base station in the Base Station Chooser, then click Continue. Note: If you see a message appear that indicates that the Wi-Fi base station has been reset, click Cancel to continue.
Click Manual Setup. Enter the base station password if necessary.
Click AirPort in the toolbar.
Click Wireless.
Choose “Extend a wireless network” from the Wireless Mode menu.
Choose the network you want to extend from the Network Name menu.
Enter the network and device password if necessary, then click Update.
The next window may indicate that there are some problems. Resolve the problems, then click Update.

Ist it possible to extend a wifi network with sevral Airport Express's?

Hi, I live in a house with 3 floors. My router and my timecapsule are located on the 2nd floor and I want to extend my network wirelessly to the first floor and the ground floor by adding several (2) Airport Express stations to my network. Is this possible?
Basically like on the picture linked:
https://www.dropbox.com/sh/g8mvrbgo4r38lzr/5uCsbQ5E2w?v=1mci
Somehow it works brilliant but, once I add the second AE my MacBook won't sign into the second AE but will stay in the first. Resulting in just not extending my network.
Thanks

Somehow it works brilliant but, once I add the second AE my MacBook won't sign into the second AE but will stay in the first. Resulting in just not extending my network.
That's because you can only wirelessly "extend" the network one time, not two.
Apple's "extend" setup works like the hub and spokes of a wheel. The Time Capsule would be your hub. There can be multiple AirPort Express devices, but each Express resides at the end of a separate spoke...and it communicates directly to the hub....not to another device at the end of another spoke.
The second extender is "joining" the network, but it provides no additional wireless signal coverage when it "joins".
You will need to move the second AirPort Express closer to the Time Capsule.....to the point where the display indicates that both Express devices are connected to the Time Capsule.
Another approach might be to move the Time Capsule to the central area on the 1st floor, then locate an AirPort Express above and below that area. That would work.
If that is not possible, then you will need to think about a wired Ethernet connection from the AirPort Extreme to the location of the second AirPort Express.

Better to create or extend my existing network? (Time Capsule, Express, AppleTV with wireless modem internet)

We have Optus ADSL broadband (Australia) running wireless via a 'Sagemcom F@ST 3864 Optus' modem. We have an Airport Time Capsule (for backup) and an Airport Express (for music connection) and Apple TV.
I currently have the Time Capsule (Express & TV) set up as their own network, sharing the internet from the Optus wireless network. Is creating a new network like this the best scenario? Or is it better to extend the existing Optus wireless network? Besides extension for range/reception, does either option have particular benefits over the other?
Other than internet, we just stream music/movies from laptops & phones to speakers/TV, so the thinking behind creating a new network rather than extending, was based on the assumption that the Time Capsule may be better at data transfer than the modem?
Any thoughts would be great!

Is creating a new network like this the best scenario? Or is it better to extend the existing Optus wireless network? Besides extension for range/reception, does either option have particular benefits over the other?
I would say it is about 50-50.. 6 of one .. half a dozen of the other.
Any scenario you dream up has a set of good points and bad points.
So some factors.
1. I presume you have the TC plugged by ethernet into the Sagem modem.. bridged and creating its own network.. using two different network names keeps the local connection load contained which is good thing.
Wireless is fundamentally poor. It has limits on being only able to handle a single client at a time.. so time slicing between all the clients. plus it is half duplex.. which is simply it can either transmit or receive not both.
In comparison, Ethernet via modern switches.. can have multiple computers talking to each other at once and can both tx and rx, ie full duplex. So using extend wireless is very bad. It means wireless is much slower as each packet is double handled.
Using multiple APs connected back by ethernet to a main router is definitely the right way to go. They can be in roaming or setup with completely different names.. that is almost irrelevant. It is easier though to manage when you do the naming and setup so you specifically allocate load.
For example.. if the TC is doing backups from TM on the computers and you start having streaming issues with the Apple TV, split the load, by naming the 2.4ghz and 5ghz differently in the TC.. and force backups to 5ghz and streaming to 2.4ghz (or visa versa depending on range issues etc.).
2. Network wise different AP should all live happily together in one happy family. The reality is that more equipment leads to more issues. I have been hitting a few issues lately with wireless routers exactly in your setup being unavailable to the network, if a computer happens to be connected to the wrong router.
For example a computer connected to the Sagem, whether by wireless or ethernet, may have issues backing up to the TC. It shouldn't but it does. I am seeing Mavericks in particular giving strife this way.
Someone recently posted a very helpful article on why this is happening.
https://discussions.apple.com/thread/5863043?tstart=0
For most people in a home network you do not want the hassle of running a server. But you can see that sometimes things start getting complicated.
Best principle is hope for the best.. set it up as per what you have done.. if it bombs or is unstable.. work back through the issues.. there are some alternative configurations which are more complicated.. eg running the TC with static IP, that seems to alleviate some of the bugs.
3. What works is best. Whatever the theory.. try a few setups.. what you setup that works well for you is the best even if the theory says no.. that is bad.
eg One post a person used roaming network with all AP's fixed to the same channel, so the idevices would roam properly. This is wrong.. but works.. normal roaming network laptops seem to be able to roam well but idevices do not. Pick what works.
https://discussions.apple.com/message/25138680?ac_cid=tw123456#25138680

How can i extend my network using an airport express

I have an airport express that connects wirelessly to an airport extreme. I would like to use it to extend my network. It has a strong signal coming in to it from my extreme. It works fine when I try to connect to the network, but it dies completely when I try to use it to extend my network. After going through a restart, it disappears from the network. The only way to bring it back to life is to unplug it, let it rest a few seconds, plut it in again, and then reset it to Connect to the Network before it crashes again.
I have a model of the express that is supposed to work with extending the network.
Thanks for any suggestions.

I would recommend that you configure your extended network by first placing the Express in the same room as the Extreme. Once the extended configuration is verified, you can take the Express to the desired location.
The key to extending a wireless network with decent overall bandwidth performance is the proper placement of the extending base station. Please check out the following AirPort User Tip for details.

HT4259 How to you extend my existing network using an AirPort Express?

Similar Messages

Maybe you are looking for