HT4259 My old Airport Extreme cannot connect to the new Airport Extreme (Base) after I upgraded to the 7.7.1. firmware.

The old extreme was working as part of the extended network when the New Extreme Base it had the 7.7. version, now amber just blinks away.
I tried hooking up an Airport Express and have the same problem.
Any pointers?

Ensure that the ethernet is connected to the WAN port (with the dotted circle).
You may have to reset and reconfigure your Airport Extreme.

Similar Messages

My PC can connect to the airport extreme but with encryption it cannot connect to the internet my iMac has no issues, any help.

My PC can connect to the new airport extreme I just purchased but with encryption it cannot connect to the internet my iMac has no issues. If I open the airport exteme up and provide no security everything is fine which leads me to believe it is something with the encryption between the two devices. Not sure what step I'm missing here this shouldn't be this difficult.

Sorry, I should have been more clear. I am asking if the DNS IP addresses, not the IP addresses assigned by the DHCP service, are the same. DNS is like the Internet's version of the Yellow Pages. Your ISP typically will provide them to you or you can elect to use those provided by another source, like OpenDNS.
DNS is the service that translates a website's URL to its actual IP address so that you can access it. I am just trying to rule out that the PC is not configured properly with the correct DNS IP information.
The other thing to check is if the PC is configured to use a Proxy service. By default, it would not be.
Finally, what is the make & model of the PC. More importantly, if the PC is using either a PCI or USB wireless adapter, what is its make & model?

AirPort does not have an IP address and cannot connect to the Internet.

Wi Fi problems
I have recently changed from a old netgear router to using a vigor 120 modem with airport extreme
Internet connection is established but my airport express reports "AirPort does not have an IP address and cannot connect to the Internet." although status is ON and the correct wifi address appears.
My iPhone also identifies the correct network but cannot connect
Any suggestions?

I don't have any phones, so not aware of the options, but on a Mac to fix this problem it'd likely be...
Instead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. Before I went through network diagnostics and all of that stuff in system preferences, and then I tried the "Join Other Network" method, and now it works like a dream.
https://discussions.apple.com/message/17028445#17028445
Or...
Go to System Preferences
Click Network
Highlight AirPort and click Configure...
Choose “By default, join: Preferred networks”
Select your access point and Remove your access point with the minus button.
Launch your keychain access in Utilities and delete your access point keychain entry.
Reboot

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

How to restart base station from airport utility? I used to be able to do it remotely I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advance

You are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart

I want to re-use my old airport express base station but airport utility doesn't recognise it anymore (it dates from 2005) i would like to use it to connect to my speakers only

I have an old airport express base station from 2005
I would like to have a network on it so i can put it upstairs in a room and connect my speakers to it so i can send my music (from itunes) over the airport to my speakers.
I reset it and now i want to configure but the Airport utility doesn't recognise it anymore.
Can i update the firmware? has it become useless because too old or what can i do?
I work on macbook pro with macOSX 10.9.4
Can someone give me some tips please
thanks
J

Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

My old ipod touch cannot connect internet.

My old ipod touch cannot connect internet. I typed correct password, ready to connect internet but came out error.

Try:
Can't connect to the iTunes Store

TS1398 my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

DPM 2012 R2 Rollup 1 x64.. cant save scheduled report.. gives error: "Reporting services server cannot connect to the dpm database"

The error also has "to repair the configuration, follow steps for repairing dpm from DPM setup help ID: 3001
I tried the solution outlined here:
http://social.technet.microsoft.com/Forums/en-US/8be919ee-f358-47a4-9cc3-d23eb05d3f18/system-center-2012-r2-dpm-smtp-issue-reporting-services-server-cannot-connect-to-the-dpm?forum=dataprotectionmanager
and also the graphical depiction here: http://www.ms4u.info/2014/01/reporting-services-server-cannot.html
I tried these steps, but everytime i try to change it, it tells me:
"The permissions granted to user 'domain\userid' are insufficient for performing this action rsaccessdenied..
Nothing seems to work..
I thought if i went into sql management studio and made sure my userid had admin rights to the db it would work.. but i cant change it there (via integrated security).. i believe i need to login as SA, but i dont recall the password for SA, though it appears
i can change the SA password from within sql management studio.. i'm unsure if doing so will break DPM though or is even needed to fix the reporting integration issue..
Any thoughts on this?
Thanks
Tech, the Universe, Everything: http://tech-stew.com

Using:
data source="servername\MSDPM2012";persist security info=False;initial catalog=DPMDB
I used the domain sqlservice account and test connection was ok.
However.. accessing reports still crashes in the MMC
Tech, the Universe, Everything: http://tech-stew.com
When i recreated the db.. i called it Reporting2 or similiar..
Then the reports folder i created called "Reports Folder"
Then datasource name "reports datasource"
The issue here is that the DPM reports in the reporting web interface are gone, since this is a new DB.. how do i redeploy them
Tech, the Universe, Everything: http://tech-stew.com
i went back into the sql reporting services area.. hit change db.. chose the original .. then back to the url.. went to the OLD reporting services folder and datasource.. added the connect string and now reporting area works.. so does scheduling..
Problem now solved
Tech, the Universe, Everything: http://tech-stew.com
Oops spoke too soon.. the first time i set it to do "status" as a schedule.. it seemed to work (clicked ok, no error).. went back and added an email notification..
Now i'm getting.. "an error occurred causing the reporting job to fail" "system files may be corrupt".
Seems to only occur if i try to add the email address portion
Tech, the Universe, Everything: http://tech-stew.com
rechecked the datasource.. i think there was an error in the connect string.. now everything seems to be working.. email notifications and all.
Tech, the Universe, Everything: http://tech-stew.com

I cannot connect to the internet. I think I have my settings all out of whack now and need to get them back to the way they were when it was working. (I know my wireless router is working because my Dell has no problem connecting to the internet.)

I cannot connect to the internet on my iMac through my wireless router. I think I screwed up the settings and need to reset them. I know the router is working because I can access the internet on my Dell laptop which is located right next to my Mac.

On your iMac try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

Cannot connect to the internet it has been connected to for a year.

Monday my Apple TV worked fine. Yesterday, it wouldn't connect to the WiFi it had been connected to for a year. I tried to hardwire it to the apple extreme and it slowed my network down to a snails pace. I bought a new Apple TV last night and it worked fine all night. Now, after being in sleep mode, same issue. Cannot connect to the network.

Hi Jeff,
Thanks for the suggestion, but I tried that page and there was nothing on it that solved my issue. I ended up calling Apple Support for help and was advised there have been issues with the latest update of Apple TV. The strange thing was that after I had it unplugged for a few days, I plugged it in while on the phone with support and it worked again. The rep gave me his email/phone and asked me to call him back if I have the issue again. Apple is aware of the issue.
Happy to have my Apple TV back.
Wade

Migration on active directory from 2003 to 2008 and SharePoint error Cannot connect to the configuration database.

Hi all,
In advance i`m thankful for your help,
I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
I`ve try to sync users... no good
PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
-eq $false)
>> {
>> $configManager.StartSynchronization($true)
>> Write-Host "Started Synchronizing"
>> }
>> else
>> {
>> Write-Host "Already Synchronizing"
>> }
>>
Can someone explain a little bit more about this:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mk

Hiya,
I don't think it is necessary to reinstall.
You should just confirm that your basic infrastructure is working.
1: On the SharePoint server, open cmd and write ping <SQL server name>
2: On the SharePoint server, open cmd and write nslookup <SQL server name>
Basically the steps outlined here, is the best way to start:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)

HT4628 My Mac Air OSX10.8.5 won't connect to the internet as it says it has a self assigned IP address and thus cannot connect to the internet. I can only connect to a network by manually typing in the configuration specs. Please help.

My mac air OSX10.8.5 won't connect to the internet. It says it has a 'self assigned IP address and therefore cannot connect to the internet'. Network diagnostics is unable to the solve the problem. It happened suddenly for no reason and now I cannot connect except by typing in the configuration settings manually. Please help me!

Use the Airport Utility or log into your wireless device via http and ensure the DHCP/NAT service is enabled. If accessing via HTTP, you will need to manually set an ip within your local subnet (eg: 192.168.0.x).

HT1695 why would my new computer with windows 8 set up fine and now all of a sudden I cannot connect to the internet on my IPaD

I have a new computer an Dell Inetel Celeron 2020 with Windows 8. I had interent connection on my old desktop and to my Iphone and Ipad, however now I cannot get my Ipad to connect to the internet whatsoever. i have messed with this since Wednesday of last week and I am exhausted from it. Please help.

So just the ipad cannot connect to the network? Does it connect to any other network?
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, turn wifi off. Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Go to settings/genreral/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer suppot website for downloads and instructions).
Wifi Settings greyed out or dim
http://support.apple.com/kb/TS1559
Recommended wifi settings
http://support.apple.com/kb/HT4199

Bonjour / "Cannot connect to the internet" - Adobe Clueless!!!

Since we have upgraded to win7 I have one problem that keeps popping up. When windows is restarted the NIC "Cannot connect to the internet". Easy fix, disable and enable the nic all is well, except it must be done every time win is started.
I have spent hours googling and trying to repair this.
Finally have determined it is ADOBE once again!
They install some CRapple software called Bonjour as a service.
However adobe is not smart enough to install it properly, they call it:
##Id_String2.6844F930_1628_4223_B5CC_5BB94B879762##
Hmmm now that I think about it, in XP it is probably the called running process with NO NAME!
They do not ask to install it, they provide no way to uninstall it.
But on each of our machines stopping and disabling this service and deleting the Bonjour folder and like magic...
Network now connects automatically to the internet.
How much are we paying adobe to pull these moron stunts on us?
How much did the troubleshooting of this adobe bonehead stunt cost us (and I assume many others)!!!
They have made Reader a liitle less viral, but it is still a real pain as a plugin and often times it just hangs for no reason.
And this new (arm?) plugin used for the cool image display that google used to ruin their product...and crash browsers...
I just KNOW it is more adobe moronism...
Sure hope google listens and maybe MOZ will ban adobe for being so clueless!!!!
The funny thing is Bonjour is referred to as " zero-configuration networking" ;-) LMAO

Not long ago Adobe retired at least some of the servers that were involved in supporting Photoshop CS2. I don't know whether that may be the root cause of what you're seeing, but I suspect it might be. They have provided a "standalone" version of Photoshop CS2, complete with all updates, for folks who have Photoshop CS2 licenses:
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
Since Adobe is no longer releasing updates for old versions, such as CS2, it's prudent to disable the software that runs in the background incessantly checking for updates that will never come. This will free up resources on your system for real work. Experience has shown it's possible to disable nearly all the software installed by Adobe to run in the background and still run Photoshop quite successfully.
I recommend downloading a free program published by a Microsoft employee called Autoruns for reviewing all the software (not just Adobe) that you have starting and running on your Windows system. Such software is the prime reason Windows systems seem to "bog down" over time. The Autoruns program allows you to disable particular modules you determine you don't need simply by clearing a checkbox, and it retains the information that you have done so by keeping the program in the list, just unchecked.
-Noel

HT4259 My old Airport Extreme cannot connect to the new Airport Extreme (Base) after I upgraded to the 7.7.1. firmware.

Similar Messages

Maybe you are looking for