HT4623 At a loss...
My Ipad froze while trying to update an App. Now it will not start and is indicating that I need to connect with itunes. I have connected the ipad to my laptop, and gone to the itunes site, but nothing happens.
Hello CathyD510,
Thank you for using Apple Support Communities!
Try connecting the iPad to the wall chager that it came with and then reset the device.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
Then restart your computer, and try connecting the iPad to your computer again and attempt the restore.
All the very best,
Sterling
Similar Messages
-
hi, my iphone 5 has refused to restore after i updated it to ios7 ...... it will not turn on, it will not restore i do get an error 21 mesg and i have attempted a couple of fixes from the net, but nothing seems to work . i have no acces to my phone it just is dead whats my best option, do i need to send it to apple ?
Hello Peter,
Thank you for using Apple Support Communities!
Error 21 is part of a range of error codes generally indicating that other software is interfering with the restore process.
Check out the troubleshooting from this article named:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error21
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
All the very best,
Sterling -
HT4623 is anyone else suffering rapid power loss since upgrading to IOS6.0
is anyone else suffering rapid power usage since upgrading to IOS 6.0
This usually indicates something was corrupted either during the update or when restoring at the end.
Reboot
Restore
Restore as new (do not restore your backup).
Odds are, the last one will fix it. Then you can re-sync your data and media. Do NOT restore from your backup, it is corrupt. -
Traceroute timeouts and lots of packet loss when a...
I host various site via the above, and since late last night and today, I am having connection timeout issues on all of them (but sites like bbc, bt etc are fine). I contacted them and performed a traceroute to my default site southee.co.uk which timed out. Below are the results:
traceroute to southee.co.uk (37.61.236.12), 64 hops max, 52 byte packets
1 bthomehub (192.168.1.254) 2.733 ms 2.414 ms 2.415 ms
2 esr5.manchester5.broadband.bt.net (217.47.67.144) 72.412 ms 29.705 ms 131.735 ms
3 217.47.67.13 (217.47.67.13) 31.390 ms 29.680 ms 103.936 ms
4 213.1.69.226 (213.1.69.226) 41.172 ms 32.700 ms 129.323 ms
5 31.55.165.103 (31.55.165.103) 30.791 ms 31.639 ms 130.306 ms
6 213.120.162.69 (213.120.162.69) 31.248 ms 59.138 ms 30.657 ms
7 31.55.165.109 (31.55.165.109) 32.159 ms 31.507 ms 31.513 ms
8 acc2-10gige-9-2-0.mr.21cn-ipp.bt.net (109.159.250.228) 31.499 ms 31.325 ms
acc2-10gige-0-2-0.mr.21cn-ipp.bt.net (109.159.250.194) 31.197 ms
9 core2-te0-12-0-1.ealing.ukcore.bt.net (109.159.250.147) 41.744 ms
core2-te0-13-0-0.ealing.ukcore.bt.net (109.159.250.139) 41.346 ms
core2-te0-5-0-1.ealing.ukcore.bt.net (109.159.250.145) 41.744 ms
10 peer1-xe3-3-1.telehouse.ukcore.bt.net (109.159.254.211) 39.527 ms
peer1-xe10-0-0.telehouse.ukcore.bt.net (109.159.254.122) 38.791 ms 38.910 ms
11 te2-3.sov-edge1.uk.timico.net (195.66.224.111) 54.032 ms 37.941 ms 38.642 ms
12 78-25-201-30.static.dsl.as8607.net (78.25.201.30) 45.830 ms 46.413 ms 42.448 ms
13 * * *
They then performed a traceroute from the server and got the following, again with timeouts and packet loss. See below:
1. 37.61.236.1 0.0% 10 0.5 0.7 0.4 2.9 0.8
2. ae0-2061.ndc-core1.uk.timico 0.0% 10 0.3 0.3 0.2 0.5 0.1
3. te2-3.sov-edge1.uk.timico.ne 0.0% 10 10.5 9.7 4.2 30.2 8.7
4. linx1.ukcore.bt.net 0.0% 10 4.1 4.3 4.1 5.9 0.6
5. host213-121-193-153.ukcore.b 0.0% 10 5.5 8.0 4.9 12.7 2.3
6. acc2-10GigE-4-3-1.mr.21cn-ip 0.0% 10 11.4 11.4 11.4 11.6 0.1
7. ??? 100.0 10 0.0 0.0 0.0 0.0 0.0
8. 31.55.165.108 0.0% 10 12.1 12.1 11.8 12.4 0.2
9. 213.120.162.68 0.0% 10 12.0 12.1 12.0 12.3 0.1
10. ??? 100.0 10 0.0 0.0 0.0 0.0 0.0
I've just spent a fustrating 15 minutes with Bt Support chat who just seemed want to pass me on to the BT Business team, so I thought I'd post here, for a more informed response.Hi Jane, Thanks for the reply. I have now purchased an AEBS(n) to try to overcome this problem. The Apple site says it is compatible with all versions of Airport card so I thought it would solve the problem. My new problem is to be found here: http://discussions.apple.com/thread.jspa?threadID=1087292&tstart=0
However to answer your questions, The OS is 10.4.10 and I have run every updater I can find for all Macs concerned. hope this helps. -
Firstly I am stating for the record that I have a problem with my phone line. My broadband issues are just a by-product of the phone line fault.
This problem has been going on for several years, although, 2 months ago i made some progress.
The problem with my phone line occurs during extreme weather conditions, heavy rain or winds and as a result of it not being a permanent feature of my phone line. Over the past year, it has got a lot worse (broadband constantly dropping, struggling to be heard when on the phone), and after a lot of arguing with BT an engineer came out. Now bare in mind that the BT line tests came back as perfect and not a problem. engineer took one look at the cable coming in to the house and it crumbled in his hand. He also mentioned that he was picking something "odd" up on the line, but couldn't be sure what it was and seeing as the broadband connected that he would leave it.
Since the engineers visit, I have had an OK phone line, just a bit quiet, until 2 weeks ago. When we had all that rain. The crackles came back that evening, causing crackles and white noise down the phone line. It lasted an hour or so, but enough time to turn my 2Mbps bras profile into a 130k profile. 3 days later and we recover (even though some intermittent crackles persist). The very next day and we're downloading at 2.5Mbps, the phone rings and the crackles are back.
The next day I ring up and complain and receive the whole dialogue about changing me £120 if the engineer comes out and can't find a fault. Funnily enough, the crackles (being intermittent) are not crackling at the time the engineer turns up, however, he states "The is more noise on the line than there should be" and "I'm going to pass it over to the underground team and see if they can find where the fault is". At this point I am now feeling hopeful that finally the fault might be found....
Half an hour ago I have heard nothing, I decide to phone up and see if there is any news... No fault found and expect a bill for £120 is the response, from a very nice Indian lady who did seem to struggle with understanding me or at least hearing me. i protested and asked how could the engineer tell me one story and for me to then be told that a line test shows no fault and that I have to pay!
Where it currently stands, is that I have insisted that the problem still exists and I have been told it will be resolved between 24-48hours.
I will of course wait and see what BT come back with tomorrow, but I am at a loss of what more I can do. I work from home and having an equivalent to ISDN when I pay for broadband because the phone line keeps having a fit is getting a bit of a hassle. If the BRAS IP profile did not take 3days to recover after a bad storm, then I could cope, but I'm now been on a 130k connection for over a week now and am looking at having to pay 3120 just because I am trying to do something about it.
If I turned round to my customers and said I'd look at their issue, but if I couldn't see anything I'd be charging them £120, they'd move else where.
Any advice as to how I can take this forward?
Solved!
Go to Solution.I thought I had better post an update and I am pleased to say that it seems it has a potentially positive outcome.
First of all the lady I spoke to on Friday got back to me yesterday to say that yet again OpenReach had investigated my issue "outside the property" and claimed to have "fixed the problem". While I am sceptical that they actually did anything (surely the broadband should have disconnected, if they fixed anything like replacing a cable, but as I am not a telcom's engineer I have not authority to make judgement), the lady implied that I had a case to dispute any charge if it ended up on my bill.
The second was a response from a forum moderator who says that after reading my posts, my email and my fault reports, they say that it sounds like this is being caused by "a high resistance fault on your line. These can be very had to get to the bottom of unless the engineer is testing the line when condition are bad" and while notes that the fault has been closed (conversation yesterday with lady from BT), they suspect that if the line does have this type of fault, then it is highly unlikely that the fault has actually been fixed and I should contact them back as soon as the noise starts up again. Oh, and they have requested no charges be applied for the visit on Thursday.
So, fingers crossed... It does seem to highlight quite a variance in the quality of customer service that you get from BT. Plus, no matter how frustrated you get, you should persevere, as there are some good people that seem willing to help and will be on your side. -
At a loss. Wiring a possessed house I think! Input needed
Need some help.
I know and have done a lot of networking No pro, but self taught. Did run Ethernet of my whole house (ex wife's house now ) pre wifi days. Running wires, using switches and routers. All worked. Have down a ton of wifi - all Apple gear for myself in my location, friends and family. Good to go. I currently run a bunch in my home for iPhones, computers, netflix, itunes server, Air Video for all devices. Flawless.
So I'm not a dummy at least. So……
To my dads house. My on going project for a year. Great house. Big. Hand built back in the '50's. All plaster. Well made.
1- His office - cable modem to Airport Extreme - named BASE. Across this room, one Airport express (all AX are older g units) for the stereo from computer.
Now when I try to extend this network only for him to use his iPhone with Apple Remote to control music, I have now bought 5 Airport Expresses - the signal will not carry for more than 10 feet at best in this house (it's possessed I swear). NOT KIDDING.
I put an Express 10 feet from the office to a kitchen, why because any further I get no signal connection.
From this Express another one 10 feet for a den.
But the signal is so weak it doesn't work.
The house is plaster - I guess very well plastered and who knows what metal lathering is behind the plaster? It's a ranch.
What could possibly abort wifi signal like this. Oh, I might add, no iPhones work in the house either. We're in NY.Long Island. Major ATT signal. Nada in house. Go outside no problem.
So I'm going to tackle this again this weekend. Start from scratch. Any insight? I'm asking because I'm at a loss and think I'M NUTS! LOL
What would make wifi not carry for any distance? Lot's of windows in the house too.
I'm on the verge of telling him to have cable run another wire and modem to the other side of the house.
I'm stumped. I was going to post a few times but can't imagine why I can't get this working. Feel like a dunce.
Right now he tells me it's no connection in the den. The last AX extender not 10 feet from him.
Thanks in advance.In addition to metal, water also will cause significant reduction in signal. The higher the frequency, the worse the problem. (One of the reasons why in the past submarines needed to surface to use their radios.) Perhaps the plaster or wood is exceptionally wet or the particular plaster they used has a high metal content. You may want to try using only 2.4GHz instead of 5HGz because lower frequencies penetrate walls better. I'm grasping for straws, but I'm not sure what else you could try short of tearing down walls.
I will tell a story of one wiring job I did. My boss gave a quote and approval sight unseen. He normally didn't do this but due to various circumstances and time constraints, he took a gamble. The job was to install a DSL modem and wireless router for a doctor's office. The modem and router were in the managers office. The reception area in the next room would have two workstations about 15 feet away, connected wirelessly. The doctor's office would get one laptop connected wirelessly, about 100 feet at the other end of the building. The building was all wood construction so no one foresaw what happened next. The manager's computer was fine since it was wired. One of the wireless reception workstations was fine with full signal strength since it was a line of sight through an open doorway to the router. The other reception workstation was working but only had 50% signal strength. (Not line of sight to the router.) The doctor's laptop had zero bars. I moved the laptop next to the router and got 100% signal strength. I walked the laptop next to the workstation with line-of-sight, and still got 100%. I walked to the other reception workstation and got 50%, same as the workstation. I walked out of the reception area turned left and started to walk down the hallway to the doctor's office. I took no more than 5 steps and got zero bars! I walked back a few steps and the meter jumped to 50%. I had to do this a few times to fully convince myself. It was only a chance conversation I had with one of the nurses who recalled that the former occupant of the office was a dentist. So we surmised that the room that the router was in might have had the x-ray machine, so they would have lined the walls with lead or whatever. In any case, we ended up having to pull wires. But we learned that regardless of what it looks like on the outside... But this does sound quite similar to your experience.
There's also the time that my coworkers found that the whole wall was 1/4" steel plate. The walls were covered with drywall so we didn't know it was there until we ruined a half dozen drill bits. It seemed like it was armor plate steel. We think the building used to be a indoor gun range or something. And there was the time that we encountered hardened concrete walls at an office using a former military building. Fortunately neither of those had Wi-Fi but we likely would have had signal problems in both cases. It taught us that we can't assume and needed to do a thorough inspection ahead of time.
So while I don't think the house is possessed, I do suspect that the original builder used some funky local material. Maybe he was a conspiracy theorist and has tinfoil in all the walls. -
At a total loss how to export IPhone 4 video To My PC
I've read and posted in various threads and looked all over the net. I admit I'm at a total loss as what I'm doing wrong at this point.
I want to take the video from my Iphone and move it to my PC so I can upload it in HD to youtube.
I've made sure to make sure my phone doesn't sync right away, gone to the my computer and click on my phone (shows a camera), then copy and paste or drag. When it moves it over it say 0 bytes.
I'll even post a link a buddy of mine sent and if you look at step 9 it says the videos should be quick time files. Mine says nothing where it says file types.
http://www.notebooks.com/2010/06/29/how-to-get-hd-video-from-you-iphone-4/
Is there something I'm doing wrong? Like I said I'm at a total loss.I'm not sure if this will help you, but I ran across the same issue. When I tried to pull the videos off the phone in windows, it would hang during the transfer, or not transfer at all. My photos and videos are kept on an external drive and I was trying to copy to that external drive. I copy and pasted the videos into the pictures folder on my PC (instead of the external drive) and it worked like a charm. Once that was done, I just had to drag and drop into the external drive.
I hope that helps! -
T500 performance loss and restart issue after low battery shutdown
Hi,
Some days ago I experienced a significant loss in performance of my T500. Unfortunately it seems to be a continuous loss and the games I play, e.g. empire total war that did run ok before are nearly unplayable at the moment.
Additionally, when the computer shuts down due to low battery, it no longer manages to resume windows but always crashs during reboot (black screen and hard disk symbol is moving, no other activity for 10 minutes)
I am working with the standard vista installation and installed all automatic updates, but also every time when I shutdown the computer, no matter how long it has been running (even after 1 minute and after a rebooting 3 minutes ago), the red shutdown symbol in start shows that an update needs to be installed.
any ideas?
Many thanks in advance !
Message Edited by Walky on 06-18-2009 09:39 PM
Message Edited by Walky on 06-18-2009 09:41 PMWell, the problem, seem's to have reoccured: Battery ran out (even the indicator leds on the side didn't show any life), Time reset to 1.1.2001, again some rebooting and setting the time again...
Is this a sign of a degrading battery health status?
It looks like reseting the SMC didn't help after all. -
At a loss with phone line and broadband
Hi,
First of all, sorry for cross posting this, but as you might gather I'm currently stuck between a rock and a hard place.
http://community.bt.com/t5/Phones/At-a-loss-with-phone-line/td-p/54639
I'm not going to repeat everything in that post, just to say when all equipment is unplugged and you get crackles and white noise through the phone, it can not be equipment, no matter how intermittent. Am I correct?
The main reason for cross posting is around the annoying BRAS IP profile. It seems that for 30mins of static, I get stuck on a 130k profile for 3days. I could cope with the occasional outage or slow down, but 3days is half a week and when you have the recent bad weather, you get 1day of decent profile before the next spat! As a result of this, I would like to see if anyone else in the community has been through similar?
I will point out that I have been working in IT for 13years, so I like to pretend that I know something about things, but I must say that BT is one of the only companies that I deal with and dealt with that seem insistent on blaming the customer for everything.
Connection information
Line state Connected
Connection time 0 days, 1:44:21
Downstream 2,048 Kbps
Upstream 448 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.1
Latency type Interleaved
Noise margin (Down/Up) 9.6 dB / 19.0 dB
Line attenuation (Down/Up) 53.0 dB / 29.5 dB
Output power (Down/Up) 17.8 dBm / 12.1 dBm
Loss of Framing (Local) 0
Loss of Signal (Local) 0
Loss of Power (Local) 0
FEC Errors (Down/Up) 5261636 / 45
CRC Errors (Down/Up) 0 / 2147480000
HEC Errors (Down/Up) nil / 28
Error Seconds (Local) 134
Solved!
Go to Solution.No I'm suggesting the mod team is preferable to calling India ....
What they do with you is down to them .... and you.
Allbeit I doubt you'll see a profile reset, but even better you may see a lasting resolution, hopefully. -
At a loss, BT can't seem to fix my problem.
I don't know if anyone else has any suggestions but I'm at a loss here.
We've had nothing but endless problems with BT over the last 4 months and I'm simply lost now.
It started when me and my girlfriend recently moved into our new ground floor flat early January and an engineer came round to set up our infinity connection (we moved it with us, had absolutely no problems at last address). He got the internet working and said someone will be round later to fix the phone line. The engineer came round and fixed the phone line but in doing so, broke the internet connection and then left. We then tried to arrange visits from various engineers, none of which actually showed up. I was even told on 2 seperate occasions that "the work will be done without anyone having to come into the property. Someone is actually working on it now" which I found out later to be a blatent lie as no one had been booked to come round. An engineer finally came out to fix our connection 11 whole days after it was initially supposed to be connected.
Unfortunately, that was only the first problem. Now, whilst the internet does work and we do get reasonable speeds (35/10 wired) the connection will drop anywhere between 10 seconds to an hour at a time at random points during the day, mainly at peak times. This will result in the DSL light on the white OpenReach modem flashing or going out completely or, since we upgraded to HH5, the light turning Amber/Orange. As someone who works from home and also enjoys online gaming in my spare time you can imagine how frustrating this can be and is starting to have a negative impact on my business. BT seem to be at a complete loss as to what the problem is, although they'd never actually admit this.
These things have so far been ruled out:
Our hub was upgraded to a HH5 with the builtin modem (not a hub or OpenReach modem issue)
All wires have been replaced.
Phoneline from the flat has been fault checked which it passed.
The OpenReach socket (the combined DSP and Phonline one) has been replaced and upgraded.
Connection has been completely restarted several times.
I'm not too good with the technical side of things but I did notice in the HomeHub settings that I'm getting a Noise Margin of - 12.8 / 17.6. That isn't good, is it? From what I can tell it should be around the 6 mark? Could inteference from someone else's flat be causing these problems?
EDIT: Oh, just thought I'd add that the actual phone line has been crystal clear the entire time with no crackling or dropouts.
EDIT 2: Something I've just noticed: When my line is stable and working correctly, the first value in the Noise Margin drops significantly (currently hovering around 3.6 / 17.1). This is indeed starting to look like the problem.
After spending roughly 4 hours on the phone to BT in the last 4 months (they REALLY enjoy putting you on hold and moving you between departments) I've given up and refuse to call them again.
This is my last ditch attempt to get my problem fixed and any help at all anyone can provide would be very much appreciated!
Thanks in advance.Hi Insignia,
Thanks for posting!
I'm really sorry for all the problems you've been having since moving into your new house. It doesn't make great reading to be perfectly honest
No need to worry as I can help sort everything out from here. Click on my username and under the "about me" section you'll see the link to get in touch with us.
Please include the link to this thread when you complete the form and whenever we've received your details we'll take it from there.
Thanks a million,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
I currently capture HD 1080i video from my Handycam using iMovie 11, then convert the .mov files to .mp4 using Aunsoft Video Converter. Then view the videos on apple tv. The quality is definitely lacking. Not sure if the loss of qulaity is from using iMovie 11 or the Aunsoft software. Any ideas on how to capture HD qulaity video and view on Apple TV?
I currently capture HD 1080i video from my Handycam using iMovie 11, then convert the .mov files to .mp4 using Aunsoft Video Converter. Then view the videos on apple tv. The quality is definitely lacking. Not sure if the loss of qulaity is from using iMovie 11 or the Aunsoft software. Any ideas on how to capture HD qulaity video and view on Apple TV?
-
Terrible Packet Loss in Game- Please help!
Computing statistics for 100 seconds...
Source to Here This Node/Link
Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address
0 Sam-PC.home [192.168.1.5]
0/ 25 = 0% |
1 2ms 0/ 25 = 0% 0/ 25 = 0% Wireless_Broadband_Router.home [192.168.1.1]
1/ 25 = 4% |
2 13ms 1/ 25 = 4% 0/ 25 = 0% L100.WASHDC-VFTTP-126.verizon-gni.net [173.66.228.1]
0/ 25 = 0% |
3 11ms 1/ 25 = 4% 0/ 25 = 0% G1-5-0-4.WASHDC-LCR-21.verizon-gni.net [130.81.213.68]
0/ 25 = 0% |
4 20ms 1/ 25 = 4% 0/ 25 = 0% so-12-1-0-0.RES-BB-RTR1.verizon-gni.net [130.81.151.230]
0/ 25 = 0% |
5 12ms 1/ 25 = 4% 0/ 25 = 0% 0.xe-8-0-0.BR2.IAD8.ALTER.NET [152.63.38.129]
0/ 25 = 0% |
6 34ms 1/ 25 = 4% 0/ 25 = 0% ae17.edge1.washingtondc12.level3.net [4.68.62.137]
0/ 25 = 0% |
7 33ms 2/ 25 = 8% 1/ 25 = 4% vl-3503-ve-117.ebr1.Washington12.Level3.net [4.69.158.26]
0/ 25 = 0% |
8 29ms 3/ 25 = 12% 2/ 25 = 8% ae-6-6.ebr1.Atlanta2.Level3.net [4.69.148.105]
0/ 25 = 0% |
9 30ms 2/ 25 = 8% 1/ 25 = 4% ae-63-63.ebr3.Atlanta2.Level3.net [4.69.148.241]
0/ 25 = 0% |
10 50ms 1/ 25 = 4% 0/ 25 = 0% ae-7-7.ebr3.Dallas1.Level3.net [4.69.134.21]
1/ 25 = 4% |
11 56ms 2/ 25 = 8% 0/ 25 = 0% ae-63-63.csw1.Dallas1.Level3.net [4.69.151.133]
0/ 25 = 0% |
12 54ms 2/ 25 = 8% 0/ 25 = 0% ae-1-60.edge2.Dallas1.Level3.net [4.69.145.11]
0/ 25 = 0% |
13 54ms 2/ 25 = 8% 0/ 25 = 0% 4.59.197.34
1/ 25 = 4% |
14 50ms 3/ 25 = 12% 0/ 25 = 0% 64.25.32.9
0/ 25 = 0% |
15 --- 25/ 25 =100% 22/ 25 = 88% 64.25.32.26
0/ 25 = 0% |
16 48ms 3/ 25 = 12% 0/ 25 = 0% 64.25.39.1
These are the results of a test I ran, but I don't know how to solve the problem. The game is unplayable because of the amount of packet loss. I know it is an issue of connection between the game and my router, so should I get a new router if mine is old?The router I would imagine to be okay for the first bit, but for the sake of things, reboot the router and also try giving your ONT a reboot by unplugging it from AC power and then disconnecting the battery. Re-connect it after 30 seconds by connecting the battery and then plugging it back into AC power.
Also, see if the packet loss takes place during specific times of the day. If your router has a WAN connection over Coax (rather than an Ethernet connection) to your ONT, also consider checking your MoCa speeds based on this FAQ. Poor MoCa speeds can suggest shoddy coaxial causing some issues, too: https://secure.dslreports.com/faq/verizonfios/3.2_MOCA#16569
========
The first to bring me 1Gbps Fiber for $30/m wins! -
My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
New@SSIS - Excel Src: The value could not be converted because of a potential loss of data
Good day,
I am currently working on a SSIS package that had been built by a previous user. That Package allows me to import data from an excel source to a SQL table. The excel sheet holds multiple columns, However I am having difficulty with one
column when running the package.
The column rows hold a character and an integer (eg: N2). The data types are as follows:
SQL – varchar(3),NULL
SSIS - double-precision float [DT_R8]
I then inserted a data conversion task to change the data type. The task holds the following properties:
Input column – F6
Output Alias – Copy of F6
Data Type – string[DT_STR]
Length – 50
When I execute the package I receive the following error:”
[Excel Source Data [76]] Error: There was an error with output column "F6" (91) on output "Excel Source Output" (85). The column status returned was: "The value could not be converted because
of a potential loss of data.".
I do know that usually the message "The value could not be converted because of a potential loss of data." refers to a data type or length problem.
Further insight to this problem will be much appreciated.Hi Zahid01,
From the error message you post, we can infer the issue is caused by the input column “F6” cannot convert to the output column in Excel Source.
Based on my test, I can reproduce the issue in my environment. The exactly cause is the data type of input column “F6” cannot convert to the data type of corresponding output column. For example, the data type of input column “F6” is [DT_STR], the data type
of corresponding output column is [DT_I4], and there are some nonnumeric values in the input column “F6”. When we execute the task, the error occurs. We can verify the issue in the Advanced Editor dialog box of Excel Source. The following screenshot is for
your reference:
To avoid this issue, please make sure the input column can convert to the output column in Excel Source, including all the values in the input column.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Loss of 3G for a few hours and then back to Normal?????
I have a 3GS 16gb phone and this morning, it lost 3G for about 3 hours or so...I called AT&T tech support and they could not do much and thought it may be a SIM card issue.
Amazingly, before i could visit the AT&T store, things went back to normal and 3G service popped up again....
Here's the question: has anyone else experienced such a thing, plus i use a magnetic clasp hip case, in which i carry my phone. Would using such a magnetic case be the cause of this loss of 3G...
Thanks for the helpThis has happened to many people, and it's possible it was a software bug on the iPhone, or that AT&T's 3G network was bogged down and there was a lot of traffic. In all honesty, if it doesn't happen to you all the time don't worry about it.
Anything that is covering up the back of the iPhone is going to lower the signal strength a little bit on the iPhone. I personally wouldn't be using a magnetic case around any electronic device, but that's just me.
Maybe you are looking for
-
Updating a view after modifying a table...
Hello, Here is the scenario. I have a a table in HANA with 50+ columns of data. I have created both Attribute and Analytical views of that data. These views have been activated and deployed. Now I need to modify my table to add two new columns tha
-
How to reduce the weight of SharePoint master page.
Hi I have given my sharePoint master page (without any additional content) & source-generated in browser. we want to reduce the weight of the page(source) can anyone tell me what are the things from the below-master page I can remove. our master page
-
How do I transfer my music from external hard drive to itunes library?
Hello everyone! How do I transfer my .mp3 files from my external hard drive to my itunes library?
-
hi i cant seem to duplicate my screen im running a hp 500 series,vga to monitor and dvi adapter to hdmi going into my second screen which is a samsung tv smart tv,
-
Having trouble getting ipod to sync with original computer,it was plugged in to laptop and sync to it but all my music and things are on desktop,and now it wants to sync with only laptop. How do i get to sync back with desktop?