HT4623 hi after updating my Ipad I added a pass word I could not remember it,it is locked now showing ipad is disabled how can I solve this problem

how can I reset my pass word??I can not remember it

Hello salahelbakry
The only option is to put your iPad into recovery mode and then use iTunes to restore it. If you have a back up in iTunes or iCloud, you can put the at backup back on and it will not bring the passcode back unless it is encrypted.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Regards,
-Norm G.

Similar Messages

HT1212 my ipad is disabled, how can i solve this problem while I don't remember the pascode

I have made many attempts to unlock my ipad. I couldn't remember my passcode.
please help ad the website solution deosn't help.

Is restoring 'Factory Settings' the answer?

HT4623 when i connect my ipad to my Mac to update the ipad to IOS7 nothing happen. how can i solve this problem Many thanks, Paul

when i connect my ipad to my Mac to update the ipad to IOS7 nothing happen. how can i solve this problem Many thanks, Paul

Can your iPad be upgraded to iOS 7? If so, what are you doing that isn't working?
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 7.0.x
iPhone 4S                                    iOS 7.0.x
iPhone 5                                      iOS 7.0.x
iPhone 5c                                     iOS 7.0.x
iPhone 5s                                     iOS 7.0.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 7.0.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 7.0.x
iPad 3                                          iOS 7.0.x
iPad 4                                          iOS 7.0.x
iPad Mini                                      iOS 7.0.x
iPad Air                                        iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

After update to be iOS 6.0.1, Wi-Fi is not connected automatically. I have to reconnect or join my known network manually all the time. How can I solve this problem? It is so tedious.

After update to be iOS 6.0.1, Wi-Fi is not connected automatically. I have to reconnect or join my known network manually all the time. How can I solve this problem? It is so tedious.

Same here... on my girlfriend's iPod touch (4th gen).
It's very annoying... really!

TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps.

IPad 2 running unauthorized modified version. What does it mean, and how can I solve this problem?

I get a message that my iPad is running an unauthorized modified version, even though I'm currently running 4.3.3. What does it mean, and how can I solve this problem? Please help, i ve tried everything. Thanks

I bought my iPad 2 three months ago from apple, and all my updates re from apple through iTunes. Version 4.3.3 is the latest version I updated, have been trying hard to update 4.35 but I get error messages all the time when the update is almost complete. Everything was working beautifully since I bought it, but this update problem just cropped up last week. I need a way out pls.

After every Firefox 34.0 reloading my add-ons have been switched off by unknown program or virus. How can i solve this problem?

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1038650 /questions/1038650]''
After every Firefox 34.0 reloading my add-ons have been switched off by unknown program or virus. Although i can switch them on and reboot firefox to fix it, but it is a little bit boring. How can i solve this problem?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

This looks like a change of behaviour in iTunes 12. Once songs are queued up to the Up Next list then they play whether ticked or not. If you want to skip certain songs already queued click the Up Next tool, then click the small X to the left of the song that appears when you hover over it.
tt2

TS2565 when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

There was no new serial needed to update from Logic 9 to 9.1.7
If your Logic 9 was an upgrade from Logic 8 it may be asking you for your original Logic 8 Full serial first and then your Logic 9 Upgrade serial...
Otherwise, it's best to call Apple directly and get them to help you...

I have to type my security code every time I turn on my ipad with ios6.0. I don' have to this with ios5.1. How can I solve this problem?

I have two problems with IOS 6.0.
1. I have to type my security code every time I turn on my ipad with ios6.0. I don' have to to his with ios5.1. How can I solve this problem?
2. I can not send email via Yahoo as usual, Only Safari allow me to it.
Accordingly, I am writting here to ask for to solve those problems.
Thanks in advance.

* Websites remembering you and automatically log you in is stored in a cookie.
* You need an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep that cookie, especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
See also http://kb.mozillazine.org/Cookies

Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

HT3376 I am not receiving emails in my Mail account. However, I am receiving them on my web based yahoo account and on my ipad. The other strange thing is that on my Mac, I have been receiving emails from Apple. How can i fix this problem?

I am not receiving email messages in my Mail account on my Mac OSX. However, emails are being received on my ipad and my yahoo web site. Also, all emails from Apple are going through in my Mail account. How do I fix this problem?

Well, the other person said theirs was working now. On yours let's try this...
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

HT204291 After updating software on my Apple TV home sharing will not work. Both Apple TV and iMac have home sharing on but when Computer is selected on Apple TV I just get a message saying "turn home sharing on". But it is. How can I solve this problem

I have just updated the software on my Apple TV since then home sharing will not work though I had not used it since installing iOS6 on my iPad 3. Home sharing is shown to be on on the Apple TV and on on my iMac. The Apple TV is connected to the router with an ethernet cable and all functions work correctly apart from my computer.
I have done the following.
Switched off the Apple TV and rebooted, did the same with iMac
Turned off home sharing then turned it on.
Checked that home sharing is on on both devices.
Selected Computer
Get a message telling me to turn home sharing on - IT IS!
Tried using airplay mirroring on the iPad but the airplay function is missing from iPad.
It is so annoying since before iOS6 and updating the Apple TV software everything worked perfectly. Any help would be very gratefully received.
Thanks

Hi Everyone,
hope this message finds you all in time. The recent Apple TV update 5.1 is terrible. Apple knows it is which is why (thankfully for some relentless user -I have no idea who but I believe it was under threat) they have allowed to sign 5.0.2 again which means you can downgrade your Apple TV 2 and 3 to a 5.0.2 version via iTunes. Who knows how long they will keep the window open but I have downgraded my ATV early this morning. I couldn't post this earlier because I was out all day but I am doing it now.
Here's how to do it:
1) Connect your ATV to your computer via a Mini USB (not included with ATV but included with many other electronic devices) - in order for your ATV to appear in iTunes you must FIRST plug the USB cable to your computer and ATV and only THEN plug the power cable.
2) Download your ipsw restore file from Apple.
5.0.2 (ATV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
5.0.2 (ATV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
3) In iTunes select yout ATV, hold SHIFT and click on Restore
4) Find and choose the downloaded IPSW file in the Open Dialog Box and hit Next
5) As long as Apple still signs that version the Restore process will begin and will take a few minutes to complete.
Enjoy!
raadore

Last time i bought iwork retail v9.0.3, then i tried to install it but it kept showing the error message. After i updated my mac, the iwork asked for a serial number and until today i can't use any of the iwork application. How can i solve this problem?

Hoping for a solution since i need to have this iwork to 'work'.. Too many assignments need to be done and i am sick of going to the library to use the desktop there. Thank you =)

I think you have two separate issues & I'll try to answer in the order you need to address them.
First, it seems you have/had the trial of iWork '09 installed. It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This has changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Next, you need to update iWork '09 to 9.0.5. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work.

I'm subscribe creative cloud membership, but the individual membership limits to produce iPad only app. How can I solve this problem? DPS app builder is not showing ipad iphone option, and membership is requiring enterprise subscription.

Hi,
I'm operating digital publishing company, and I'm an individual subscriber of CC.
When I use DPS app builder for making ipad+iphone app, the DPS is only showing iPad option as default.
And it's not possible to enroll Newsstand app either.
How can I make ipad+iphone app which is fully supporting newsstand?
Is it possible upgrading from individual to professional/enterprise subscriber?

You will need at least a professional DPS account. Creative Cloud allows only single edition iPad apps.

HT4623 hi after updating my Ipad I added a pass word I could not remember it,it is locked now showing ipad is disabled how can I solve this problem

Similar Messages

Maybe you are looking for