HT4623 how can i use one i5 in oman which is bought from australia?

how can I use my i5 in oman which is bought from Australia?

Hi,
   I put new sim card (omantel -prepaid) but some msgs. is came.( The sim card that you currently have installed in this phone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the I phone.Please insert another SIM card from a supported carrier  or request that this I phone be un locked by your carrier.Please contact Apple for more information ).

Similar Messages

  • How can you use one NetStream to publish video and audio from another NetStream in AS3?

    Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen.  How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere?  I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved.  The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

    RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
    RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
    How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
    URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

  • HT4623 how to factory unlock I 5 in oman which bought from australia?

    how to factory unlock I5 IN OMAN WHICH is bought from australia?
    when i put oman sim card ,  and phone cannot start.

    rijufrommuscat wrote:
    in oman carrier?
    but already went there .but they are telling it can unlock from Australia only
    They are telling you the truth.

  • How can i use one SQL statement to solve problem?

    How can i use one SQL statement to solve the question below?
    For a Table named A, there is a column named F(char type).
    Now select all the records where F like '%00' and update their F value to '%01'
    Just one SQL statement.Do not use PL/SQL block.
    How to do that?
    Thanks.

    What is the data volume for this table?
    Do you expect lots of rows to have '%00' as their value?
    Following two statements come to mind. Other experts would be able to provide better alternatives:
    If you have index on SUBSTR(f, 2):
    UPDATE A
    SET    f = SUBSTR(f,
                      1,
                      length(f) - 2) || '01'
    WHERE  substr(f,
                  -2) = '00';If most of the rows have pattern '%00':
    UPDATE A
    SET    f = SUBSTR(f,
                      1,
                      length(f) - 2) ||
               DECODE(SUBSTR(f,
                             -2),
                      '00',
                      '01',
                      SUBSTR(f,
                             -2));

  • How can i use one iCloud Photostream on 2 devices?

    Due to a bug (or feature) on iOS 8 i can't use the same icloud id on 2 iphones:
    https://discussions.apple.com/thread/6536998
    So how can i use ONE iCloud Photostream then on 2 devices?
    Also, on OSX i can define only one Photostream.
    So, how do you import pictures from 2 streams into iPhoto?
    Familyshare is not usefull as the pictures are not in Original-Filesize!

    Hi ..
    Yes. " iPhone 6 or 6 Plus.  iPad Air 2  or  iPad mini 3"
    Set up and use Apple Pay

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • 1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

    1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

    HI Frostyfrog
    CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
    it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
    I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
    The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
    Good luck

  • 2 atv's both have home sharing enabled but one asks to turn on home sharing on my pc but it is on so can only use one at a time to watch movies from my computer

    2 atv's both have home sharing enabled but one asks to turn on home sharing on my pc, but it is enabled on pc so I  can only use one at a time to watch movies from my computer

    Both atv,s are on the same network, they are wirless and the computer can see them and they are named different.
    what ever one i switch on first gets to stream from my computer and the other one asks for home sharing to be switched on, then if i switch both off and start the other one first it gets to stream and the other one which worked asks for home sharing to be turned on. i have hidden all functionality, netflix etc as these are for my 7yr old kids.

  • How can I use Airdrop in my iMac which has OX 10.9.2

    How can I use Airdrop in my iMac which has OX 10.9.2

    If you have an iPhone5 and an IMac,
    - you should have your photos in phototstream (last 1000)
    - your iphone should have your icloud account linked
    - your imac should have your icloud account linked
    more info http://support.apple.com/kb/HT4486

  • How can I use one photo twice in a slideshow

    I am in iPhoto '11 9.4.3 making a slideshow to send to iDVD for my mother-in-laws funeral next Wednesday.
    How can I use this one particular photo of her several times in the slide show.
    I have tried copy/past and that does not seem to work.
    Thanx in advance

    I would just duplicate the picture several times and keep inserting duplicates ...

  • New to LABVIEW. How can I use one analog channel to trigger acquisiton of a signal on another analog channel?

    I am new to using Labview and have been tasked to write data acqusition program for my company. We are attempting to log 6 machines, each with their own asynchronous trigger (I can't use one trigger for all 6 machines). I have the idea to use (for example) ai0 for the measurement and ai1 for the trigger (for one machine), yet I see nothing in the documentation on how this is done. I have tried playing around with the DAQ express VI (I am using Labview7) but still don't see a way to have the setup I am looking for. I'm sure this is a relatively easy question, but I'm unsure where to go to look for an answer. Any helpful pointers or guidance in the right direction
    would be very helpful!

    If what you want to do is start the acquisition of channel 0 when channel 1 reaches the trigger condition and not start channel 2 until channel 3 reaches it's trigger condition, then no, you cna't do that unless you have multiple daq devices. What can be easily done is continuously acquire all channels and monitor your trigger channels. When the trigger condition is met, then perform the analysis/logging. On the Analyze>Waveform Monitoring palette is the Basic Level Trigger Detection function. Use one for each trigger channel and have it return either the index or relative time of the trigger occurance. This value can then be used to idex that portion of the measurement channel that you're interested in.

  • HT3354 how can i use one table for reference to another

    how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

    you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
    Here is an example of something you can do with two tables:
    The table on the right is title "Data" and stores a list of names with age and favorite color.
    The table on the left uses the value in the first column to lookup up information in the table Data
    in the table on the left:
    B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
    I know this look complicated.  so I'll break it up into smalled pieces:
    first the "&" is called the concatenate operator and joins two strings.  like this:
    a string is a set of characters between double quotes.
    so "string 1" & "string 2" becomes "string 1string2"  or "Sam " & "Jones" becomes "Sam Jones"
    you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
    so if cell A1 contains "Hi " and the cell A2 contains "There"  then A1 & A2 will result in "Hi There"
    so you could add the formula
    A3=A1 & A2
    this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
    OK.  So the formula I provided concatenates several items together:
    it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
    the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data".  If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
    all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
    You will find the Numbers users guide and function reference helpful.  You can download then from Apple here:
    http://support.apple.com/manuals/#productivitysoftware

  • How can I use home sharing between our iphones (create playlists from both accounts at once)

    How can I use home sharing between our iphones, so that we can create playlists with songs from both of our libraries?  We share a Macbook Pro (separate accounts) and each have the new iphone, but when I have my iphone and try to create a new playlist, I can only grab songs from one account.  Is there a way to create a playlist using both accounts since we are sharing?
    Does it have to be created within iTunes first on our Mac?

    The short answer: because Home Sharing isn't designed for sharing apps, and apps aren't designed to be shared.
    The longer answer:  Think of it like this...
    You download some music in iTunes.  With Home Sharing, another user can listen to it by streaming it over the network.  But the data itself is on your computer.  If you turn off the computer or take it off the network, the other user can't access it.
    But if you send another user the app, they aren't just streaming the data- they installed it on their iOS device.  Because they weren't the one that purchased it, such a transfer could easily be considered "piracy" or "stealing," and nobody likes that (least of all, Apple). 
    When iTunes sees this app, it obviously recognized it, as if saying, "Hey, how did you get this app on your device, if I have no record of you purchasing/downloading it from the iTunes store?"
    post edited to correct spelling errors

  • How do I use one of my photos as my wallpaper from the iPhoto app?

    Hi, As the heading says - How do I use one of my photos as my wallpaper whilst using the iPhoto app please.

    ziffos wrote:
    Yes - you assume correctly although I thought this would have been obvious seeing as we are in the iPad section of the forum.
    Obvious to you and me who are paying attention, but actually, if you look through the post topics, many people confuse iPhoto for iOS with iPhoto for the Mac. 

Maybe you are looking for