HT4623 i downloaded iphone software but after updating ipod i seem to be asked to download again to update phone. what do i do to avoid downloading again, but update iphone

i downloaded iphone software but after updating ipod i seem to be asked to download again to update phone. what do i do to avoid downloading again, but update iphone

What specifically is the message saying?

Similar Messages

  • I have an Apple AirPort Extreme Base Station (Simultanious Dual_Band) (MC340LL/A), and updated the software.  After updating no devices can connect via wifi.  Any suggestions.

    I have an Appl,e AirPort Extreme Base Station (Simultaneous Dual_Band( MC340LL/A.  After updating the software, no devices can connect via wifi.

    As suggested in another discussion area, (AirPort), I reset the AEBS to factory defaults. On the TV, I went to >Settings>General>Network>Configure Wireless>Wireless Networks. I could then see the generic "Apple Network xxxxx" on the TV. From my MacBookPro, I verified that I could connect to the TV by launching iTunes and noting that the TV was now visible in the "Devices" menu. Went back to the AEBS and ran through the "Setup" routine. I did NOT use the "Previous Settings" but instead, saved the old settings profile, created a new wireless network and new settings profile and enabled WPA2 Personal encryption. I then went back to the TV and went through the "Settings" routine again (as noted above). This time, after entering my WPA2 password, the TV connected to the network and problem was solved. Thanks.

  • HT4623 Since installing latest software I cannot access wifi,it seems there's a common term for this called greyed out.this is a software update issue as it's only happened since updating to latest IOS.Will there be a solution or is this the time to give

    Since updating to latest IOS I cannot switch on wifi,looking at other sites it appears it's a software issue.how long do we wait for a bug fix as the common term greyed out is affecting a lot of phones after researching I phone users with the same issues.i know at the moment it's either move on to another phone system or do I risk the wait for a bug fix? I would like all with similar issues to list here so something might be done to resolve the software problem.

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • HT4623 My ipad2 is not restarting after updating to iOS7, I now only get the apple symbol? Please advise what I need to do to get it working again. Thanks.

    My ipad2 is not restarting after updating to iOS7, I now only get the apple symbol? Please advise what I need to do to get it working again. Thanks.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT4623 my i phone4 lost sound after update

    no sound on my i phoe 4 after update!

    The service centre told me it will need changing the logic board

  • HT4623 We lost sound on games after updating iOS 7.  How do we fix

    We lost sound on our iPad 3, after updating to iOS 7.  Pandora still works. How can we fix?

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Swipe upwards from bottom of screen to launch Control Center. Make sure sound is not muted (tap the little bell)

  • Software crashing after updating to Yosemite, what should I do?

    I haven't been able to work since I updates my operating system from Mavericks to Yosemite. I don't have money to fix it, and I'm desperate to downgrade to Mavericks again. Don't know what else to do. I have original software and everything is CRASHING!!!

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Clients not showing apps in software center after update to CU4

    I recently upgraded my SCCM2012 SP1 to CU4 in an effort to support our Macs some of which are running Mavericks. However, I have been noticing that many times when I do an OSD of a Windows computer one of a couple things will happen. If it is a computer
    that is being re-imaged, it will only get a single app installed and no other apps will show up in Software Center. I also just today got a new computer and most of our apps are in SC but several are missing. They show up in the console as being deployed to
    the machine in it's properties under Devices, but they just aren't getting to the computer. On the re-image computer many times I could just remove it entirely from SCCM then re-add it and it would work fine but with the new computer I'm at a loss as to what
    to do. Has anyone else seen this behavior?

    Is the device stuck in provisioning mode?  That would block it from getting client policy (among other things).
    To check, see ProvisioningMode = True under the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\CCM\CcmExec registry key.
    This usually happens if an unsupported update gets installed while in the task sequence:
    http://support.microsoft.com/kb/2894518/en-us
    You can fix a broken client with this PowerShell command:
    Invoke-WmiMethod -Namespace root\CCM -Class SMS_Client -Name SetClientProvisioningMode -ArgumentList $false
    To keep them from breaking, use offline servicing to inject the updates into all of your images so they don't get installed during the task sequence.
    I hope that helps,
    Nash
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you've found a bug or want the product worked differently,
    share your feedback.
    <-- If this post was helpful, please click "Vote as Helpful".

  • IPod Software - needed after update?

    Quick question about the iPod software updater. Does anyone know if I really need it on my computer to run my iPod on the computer? It takes up 171 MB on my work computer and I think that's what is slowing the computer down. It's by far the largest file on the computer.
    Also -is it okay to delete the old updates? They also take up 170+ MB.
    Cheers.

    You need the current one on your computer (2006-06-28). Keep it there.
    You can uninstall the older iPod Updaters. The only "con" to this is that if you ever want to use an older version of iPod software (such as 1.0 or 1.1.1), you won't be able to.
    btabz

  • HT4623 How do I add Siri after updating?

    I updated my iPad 3 to iOS 6 but I don't see Siri in my settings. What do I do?

    THANKS!!!! Never would have thought of that. It's working

  • Could not activate the Iphone after updating

    I just update the software and after updating, it shows on the phone slide to set up, I did it and put all the information that is needed but unfortunately I could not activate the phone, did it many times...but it shows, iphone could not be activated because the activation server is temporarily unavailable. I tried even connecting to itunes to activate but still same result...The iphone was perfectly working before I update the software...what must i do now? help me please.

    Generally this is a sign that the iPhone has been jailbroken or hacked.
    Google may provide some direction if this is the case.

  • N73 dead after updating from nokia online firmware...

    can anybody help me i have a n73 it belongs to one of my customer he has a software issue.. the phone was freezing.. i tried to update it with the online firmware update from a nokia software.. after updating the phone wont turn on anymore.. can anyone help me about this issue.. thank you..

    ok guys, please be advised that upgrading N73 is not something everyone can do! Please view the software upgrade page completely before upgrading your phones. It is all stated there already.
    Here is a quote from the page:
    Please note that not all N73 models have new software available. Nokia produces many different variants of each product (for different countries and languages) and not all variants have updated software. It is our priority to update all variants as quickly as possible and we apologize for the delay. We will let you know as soon as new variants do become available. (24-Nov-06)
    Nokia N93 updates are temporarily unavailable due to maintenance. You can still download and install the Nokia Software Updater application to your computer for use with other compatible Nokia products. (16-Nov-06)
    Firmware upgrading is something serious. Please read everything before upgrading it!Message Edited by mmubashar on 14-Jan-2007
    12:15 PM
    -= If you laugh at someone on their problems, you are laughing at yourself for the same problem you faced once ago =-

  • HT4623 when i try to update my iphone with itunes finished update and try to activate but i cannot activate my i phone after update the software

    when i try to update my iphone via itunes then after update my phone cannot activte how can i activate my iphone ?  and what is the wrong with that

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    Where did you acquire this iPhone?
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>About=>Carrier?
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743 

  • My iPhone 3Gs is now no longer a recognised device on iTunes after I downloaded the new iTunes with iCloud software, but it does recognise my iPad2??

    My iPhone 3Gs is now no longer a recognised device on iTunes after I downloaded the new iTunes with iCloud software, but it does recognise my iPad2??
    I run both Mac and a PC and have iTunes on both, which has previously recognised my iPhone. I had updated my Mac with the new iTunes software with iCloud and updated my iPad2 just yesterday. I then wanted to do the same with my iPhone today, but my Mac wouldn't recognise the device so I tried it on my PC, which recognised the phone but told me I needed to update my iTunes and this in turn wanted to update my iPhone software. After completing all this and restarting, my iPhone now shows the iTunes icon with the USB plug pointing towards it, obviously wanting me to plug it in to my computer to re-connect with iTunes, but now neither of my computers recognise my iPhone and my PC states an 'Unknown Device'. My Mac doesn't even see it. Can anyone help as I really need to get my phone working?? Thanks

    Hold down the Home and Power button for 20 seconds. And try to update again.
    Also read and follow this:
    http://www.apple.com/support/iphone/assistant/restore/

  • After updating my iphone 4 to ios 7.0.2 i can no longer download apps or even update my apps on apps store i already tried signing out my apple id but after i reset my phone i can no longer sign in it shows "cannot connect to itunes store" I NEED HELP PLS

    I BADLY NEED A HELP PLEASE after updating to IOS 7.0.2 i can no longer download or even update my app thru apps store i already tried signing out and resetting my iphone but after the reset i can no longer sign in to my apple id it says" cannot connect itunes store" what should i do please help...

    I am in the same predicament...any resolve?  Other than possibly taking it into the shop?

Maybe you are looking for