HT4623 my keypad on the ipad working very slow after update

After the ios update when i try to type the keys take a long time to work and then sometimes wrong letter.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Similar Messages

IPad 3 very slow after updating to iOS 8

I Updated my iPad 3 to iOS 8 the day it was released and almost immediately after it finished updating I started having problems.
1) The Wifi connection is incredibly slow on every device I update.
2) The entire iPad 3 itself runs very slowly whether I am running apps or switching between (yes I have been shutting down programs when not using them as to conserve RAM but it still runs poorly)
I also did download 8.0.1 with no new issues but did also download and install 8.0.2
I just would like to know if there is anything I can do to get better performance back to my iPad.

No, this is definitely an iOS 8.3 bug, Allen. I have an iPad mini (original, 24/12 old) and an iPhone 5 (not S, 18/12 old). Updated both from 8.2 to 8.3. I keep them and the apps up to date and run a tight ship.
Since the update, the iPhone has been behaving normally.
However, starting immediately after the update, the iPad has been rebooting: when you plug it into the power and it goes to sleep, it reboots itself. This NEVER ONCE happened before the 8.3 update -- and I think I started with this iPad on iOS5 or at least 6, with all the updates inbetween. If you want to use it again shortly after plugging it in, you have to wait about five-ten minutes (as other have reported). So far, it has always rebooted successfully. But you do have to put in your passcode in response to "you have to enter your passcode upon rebooting" message; and tell it to trust your current computer connect once again.
It just now rebooted itself once again when plugged into the computer USB port, while in the middle of a sync (the screen went to sleep). Not happy about that; potential to damage data.
I confirm: this NEVER happened before 8.3, and it now reliably happens EVERY TIME I plug the iPad into power and it goes to sleep. I have three power sources (computer USB, individual Apple charger, aftermarket reserve battery charter) and it happens with all of them.
As far as I can tell, it only reboots itself once per charger-plugin, and doesn't do so again until you unplug it and plug it back in again (somewhat confident, but not 100% sure, of that).
Hope that helps. The bug needs squashing, and soon.

Typing on the iPad 2 very slow to respond with iOS 7

Why is typing on the iPad 2 very slow to respond with iOS 7?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.

IPhone 4 8GB white working very slow after upgrading to IOS7

Phone 4 8GB white working very slow after upgrading to IOS7

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Mac mini 2010 very slow after update to Mavericks

My mac mini 2010 (2.4 Ghz, 8GB ram) is running really very slow after updating to Mavericks.
Clearly OneDrive is a pain... but had it running on ML as well, and though it is a memory and CPU hog, it never really slowed down the system.
This is what Etresoft says:
EtreCheck version: 1.9.15 (52)
Report generated 21 Aug 2014 19:39:34 GMT+2
Hardware Information: ?
Mac mini (Mid 2010) (Verified)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information: ?
NVIDIA GeForce 320M - VRAM: 256 MB
32LG3000 1360 x 768 @ 59 Hz
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 1 day 0:0:8
Disk Information: ?
TOSHIBA MK3255GSXF disk0 : (320,07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 319,21 GB (104,99 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Western Digital Ext HDD 1021 1,5 TB
S.M.A.R.T. Status: Verified
BigOne (disk1s1) /Volumes/BigOne: 1,5 TB (16,45 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Logitech USB Receiver
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6) Support
[not loaded] com.iospirit.driver.RBTSRPlugin (1.18 - SDK 10.6) Support
[loaded] com.iospirit.driver.rbiokithelper (1.18.1 - SDK 10.6) Support
Problem System Launch Daemons: ?
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.iospirit.candelair.daemon.plist Support
[loaded] com.iospirit.candelair.sync.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist Support
[running] com.plexapp.helper.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ?
iTunesHelper
Preview
ElementsAutoAnalyzer
Google Chrome
SEC Helper
Internet Plug-ins: ?
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Candelair Support
Perian Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 199.51 GB
Destinations:
BigOne [Local] (Last used)
Total size: 1 TB
Total number of backups: 84
Oldest backup: 2013-07-17 22:07:43 +0000
Last backup: 2014-08-21 17:31:13 +0000
Size of backup disk: Excellent
Backup size 1 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      78% OneDrive
      3% ScreensharingAgent
      3% WindowServer
      0% Google Chrome
      0% fontd
Top Processes by Memory: ?
1.18 GB OneDrive
90 MB Google Chrome
82 MB Finder
57 MB mds_stores
51 MB Google Chrome Helper
Virtual Memory Information: ?
4.46 GB Free RAM
1.94 GB Active RAM
321 MB Inactive RAM
908 MB Wired RAM
3.02 GB Page-ins
506 MB Page-outs

Chances are you have applications that are out of date and need to be updated. Another possibility is Spotlight is indexing and you to wait until it has finished.

HT2848 hi my mac ppc g5 very slow after update mac os x 10.5.8

hi my mac ppc g5 very slow after update mac os x 10.5.8

See if you can hop over to the PowerMac forums.

The computer works very bad after upgrade from 10.4.11 to 10.5

hi,
I have upgraded my powermac g5 double processor from 10.4.11 to 10.5 now the computer works very bad. If I try to launch software update the application crash, final cut pro crash, when I try to mount a disk image the application crash, firefox is very slow and I can really navigate on the web.
somebody has some suggestion?
thanks
andrea

this is the error for "installer":
Process: Installer [3011]
Path: /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer
Identifier: com.apple.installer
Version: 3.0 (276)
Build Info: Installer-2760000~1
Code Type: PPC (Native)
Parent Process: launchd [103]
Date/Time: 2009-10-12 10:22:40.713 +0200
OS Version: Mac OS X 10.5 (9A581)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x000000000000feec
Crashed Thread: 12
this is the error for "final cut pro":
Process: Final Cut Pro [3030]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: ??? (???)
Build Info: FCPApp-905291121~12
Code Type: PPC (Native)
Parent Process: launchd [103]
Date/Time: 2009-10-12 10:30:09.469 +0200
OS Version: Mac OS X 10.5 (9A581)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0
Dyld Error Message:
Symbol not found: kPrivateTundraFileWritingOptionsKeyDontValidateTimeCodeWhenWriting
Referenced from: /Applications/Final Cut Pro.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO
Expected in: /System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CoreMediaIOServicesPrivate
this is the error for "software update":
Process: SoftwareUpdateCheck [498]
Path: /System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateCheck
Identifier: SoftwareUpdateCheck
Version: ??? (???)
Code Type: PPC (Native)
Parent Process: launchd [430]
Date/Time: 2009-10-09 14:24:01.678 +0200
OS Version: Mac OS X 10.5 (9A581)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000004
Crashed Thread: 1

Iphone 5 VERY SLOW after updating to IOS 6.1.3. What is wrong? Restoring it does nothing.

My Iphone 5 is miserably slow after updating to IOS 6.1.3. I've tried restoring it and nothing works. What happened? It's even restarting over and over on its own

I guess it of no use...It is with subscription....batteries issues will not be entertain....Lots of reasons. Company will not entertain batteries issues unless is really serious.
Anyway, I will continue to use it with bare Apps...I will not buy any apps, no movies, musics...cause it would last me a day. I will definitely not buy any Apps.
the last verison 6.02 was definitely better at battery management...this version is really bad. Do not know why some users said 6.10 improved the battery....but mind did not.
Forget about buying Apple products again...this is mind first time using a smartphone (as a gift too)...and how disappointed I am. Truely, if company wants users to use their products, they should give decent batteries...the IP5 has the same battery as the 4S and 4S last at least 2 days.
With all the hype and marketing that Apple is making...a decent battery should be provided.... I am not asking for anything more....what is the point of having the most advance IOS or hardware..when batteries cannot give users a decent life (2 - 3 days are good enough) not 1 or less day....By the Way, IP5 isn't cheap. It is were, I would not waste my time posting here....
This is really hopeless and pointless
Disappointed, really disappointed and displease. anyway to get back version 6.02..cos 6.10 really hopeless for me.

My mac book pro very slow after update to Yosemite

hi. my mac book very slow after I upgrade to Yosemite. Is anyone like me? How should I do?

Yes, many are like you. Most of them have incompatible or poorly written software or not enough ram though. Download and run EtreCheck http://www.etresoft.com/etrecheck and post its result here so that we may get a look at your aystem.

Web browsers working very slow after clearing the cache

Hello, I'm hoping for some help with making my web browsers run normally again. I watched this video https://www.youtube.com/watch?v=1O9NNK74KIQ and followed some of the advice to create more space in my startup disk, mainly removing all website date from safari. After that though I noticed that my web browsers (Safari, Firefox) began running very slowly. Any suggestions?

Is it running extremely slow? Like unbearably slow? Or just noticeably slow? If you cleared your cookies and cache files I would expect the web browsers to feel a bit slower than normal. Part of the reason your computer saves those particular files is to help the web browser load webpages that you've visited in the past quicker. Kinda like remembering a persons name, versus having to introduce yourself every single time you meet each other. (bad analogy, but it makes my point). Without those files, your computer will begin recreating all those files and "reintroducing" itself to each website.
Now if your web browsers feel slow after a day or two, then perhaps something else is going on.

Ipad mini very slow after ios7 update

A) Since installing IOS7 on my Ipad Mini (which I purchased only in April) everything runs slow
B) Facebook flashes and disappears and I have to relaunch the program
C) When switching screens the animation is very choppy
So what's the deal? Were there real beta testers or what? How can these things be missed??
Where's the solutions?
Jeannie

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Printing to Airport Express connected Laserjet 1012 very slow after update to 10.6.8

After updating a pair of computers that we have here to 10.6.8, printing to our Airport Express connected HP LaserJet 1012 has become incredibly slow. I timed it and it is taking 2:30 to print a blank page, whereas printing the same blank page under 10.6.7 (on an external drive connected to the same MacBook Pro) happens within 2 seconds. One thing that I have noticed is that when I bring up the HP Printer Queue the computer says 'connecting to printer' for 20 - 30 seconds, then sits at 50% complete on the printing for some time - anyone else running into similar problems?

Because I am not experiencing the same issue I have not needed to apply the CNET article. But just to be clear, did you follow the instructions to the letter?
If you did and it's still not working then you can begin narrowing down where the problem is by following some basic trouble shooting steps. First thing I'd try is creating a new user account (call it TEST ACCOUNT) and leave it alone, then try printing from that account. If it works then you know it's a software issue in your normal user account. If it still doesn't work then what I'd do is:
1. Download 10.6.8 Combo Update at http://support.apple.com/kb/DL1399
2. Disconnect all peripherals (including the printer)
3. Backup using both Time Machine and/or a Bootable Clone using SuperDuper or Carbon Copy Cloner
4. Restart from the Bootable Clone or the Snow Leopard install discs.
     a) choose language
     b) Click Utililities Menu
     c) Disk Utility
     d) highlight the internal HD and the First Aid tab
     e) Repair Disk Permissions, Verify Disk & Repair Disk.
     f) exit Disk Utility and restart in Safe Mode
5. Install the Combo Update
6. Restart normally and test the system
7. Begin connecting peripherals one by one and testing each.

Very slow after update

    I recently auto updated my macbook Pro as per below, and all of the sudden my computer became extremely slow, to the point where it is impossible to work with it. I am using the MAC OS X version 10.6.8. After checking the Apple support, I realised that MBP81.0047.B1E is only compatible with OS 10.7. Could this be the reason causing this slow down? I had this problem immediately after I did the update. Please Help!!!!!!
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i5
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Boot ROM Version:          MBP81.0047.B1E
SMC Version (system):          1.68f96
Serial Number (system):          C2XFCPA3DH2G
Hardware UUID:          D741C742-3E11-5260-BDA5-87CE727AAE3E
Sudden Motion Sensor:
State:          Enabled

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

Processing is very slow after update

Hi team
My xperia T 2 ultra dual is becomes very slow and some time it's strucks.. I am sure after the latest update I am facing this issue.. Please help me out...

Reinstall the latest update with PCC PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

All internet activity is VERY slow after updates.

Hi. I'm on a flat-panel iMac running 10.3.9. I've got 1GB ram and 17GB left on an 80GB HD. I've got Qwest DSL with an Actiontec modem. I'm going straight from the wall to the Mac. No wireless or network.
My browsers are running incredibly slow after I added a few recent updates to iSync, iTunes, Security Update, iPod and maybe one or two others. It's the same on Safari, Explorer and Firefox.
I checked my connection speeds on several different sites. I'm getting good times on those (4.5 down and 720 up.) Downloading files is no problem. It's just getting to the actual pages that is a pain in the butt. It's weird.
I called Qwest. All the lines looked great, which doesn't surprise me since the connecion speeds were good.
I've emptied the cache on Safari. I've repaired permissions several times. I've restarted everything. Unplugged, then re-plugged every connection.
Everything was cruising along fine until I installed those updates. I'm not saying they're definitely the culprits, but I do wonder if other people have had this problem.
The machine is basically acting like it has spyware, but I know none really exists for Mac.
Any other ideas about what I could try to do?

Not sure if this will help but it fixed a lot of issues on my families iphones. Settings, General, Reset, Reset Network Settings. It will wipe any wifi details so you need to have those to hand to set them uback p again.
This fixed various problems with no sound when dialling, no ringer etc. May be a providor issue rather than iphone issue though but it is a good tip to refresh all your settings, without affecting anything else on your devices.
Keep it fresh

HT4623 my keypad on the ipad working very slow after update

Similar Messages

Maybe you are looking for