HT4623 Need help to Update my Ipad2 please

hello um i have a problem i'd like to update my Ipad2 but i don't have the "Software Update " Botton...what can i do? please help me :/

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Similar Messages

Need Help, i have an Ipad2 after 6.3.1 update, i have no cameras, or e-mail, I already reset, multiple times, but no improvment, can anyone help?

Need Help, i have an Ipad2 after 6.3.1 update, i have no cameras, or e-mail, I already reset, multiple times, but no improvment, can anyone help?

When you say reset, do you mean a reboot by holding both the power and home buttons until the apple logo appears, ignoring the red slider if it appears?

HT4623 I need help ASAP updating my jailbroken iPod touch 4th generation

I have a 4th generation iPod that's jailbroke by Cydia, I need help to update it to IOS 6. From my ipod

You can't, over-the-air update did not become available until iOS 5, you show iOS 4.1.
And we cannot discuss jailbroken devices here per the moderators.

Please i need help i updated my iphone 3gs and now its not activating

i need help i updated my iphone 3gs and now its not activating

What happens when you try to activate the iPhone?
If there is an error message, what is the exact wording of that message?

I need help fixing kernel panic asap please help

i need help fixing kernel panic asap please help

OS X- About kernel panics
Mac OS X- How to log a kernel panic
Post a copy of your most recent complete panic log.

I need help instantly on this program please

import java.util.*;
public class D3
          private static int[] z = new int[100000];
private static int first=z[0];
          private static int last=z[n-1];
          private static int n=100000;
public static void main(String args[])
Scanner input=new Scanner(System.in);
for(int i=0;i<z.length;i++)
          z=2*i;
int seqSearch(z;50000;n); //method call 4 key where key=mid
          int binSearch(z;first;last;50000);
          int seqSearch(z;35467;n); //method call 4 key where key in the left half
          int binSearch(z;first;last;35467);
          int seqSearch(z;89703;n); //method call 4 key where key in the right half
          int binSearch(z;first;last;89703);
          public int seqSearch(int z[];int key;int n)
     long start = System.currentTimeMillis();
int count=0;
int ans=-1;
for(int i=0;i<n;i++)
if z[i]=key
count++
{ans=i
break;}
return ans;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
     public int binSearch(int z[];int first;int last;int key)
     long start = System.currentTimeMillis();
     int count=0;
     if(last<first){
     count++;
     index=-1;
     else
     count++;
     int mid=(first+last)/2
     if(ket=z[mid]{
     index=mid;
     else
     if(key<z[mid]){
     index = binSearch(z[];first;mid-1;key);
     else
     index=binSearch(z[];mid+1;last;key);
     return index;
     long elapsed = System.currentTimeMillis() - start;
     System.out.print("Execution Time:" + elapsed);
     System.out.print("# of Basic Operations:" + count);
// if anyone could tell me whats wrong with my code i'd be greatful...the program is supposed to perform binary and sequential search on a sorted array of 100000 numbers.once on an item in the middle of the array once on the right side of it and once on the left side...i also need to count the number of basic operations for the same number in both sequential and binary to see whats better.and i need to check the time...plz i need help now,,,

"Guide to a first-time poster"
you need to add exclamation marks to signify how urgent it is
e.g.
i need help instantly on this program please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
capital letters is better
I NEED HELP INSTANTLY ON THIS PROGRAM PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
starting the italics on line 1, better again
import java.util.*;
public class D3
private static int[] z = new int[100000];
private static int first=z[0];
private static int last=z[n-1];
private static int n=100000;
public static void main(String args[])
Scanner input=new Scanner(System.in);
for(int i=0;i<z.length;i++)
z=2*i;
int seqSearch(z;50000;n); //method call 4 key where key=mid
int binSearch(z;first;last;50000);
int seqSearch(z;35467;n); //method call 4 key where key in the left half
int binSearch(z;first;last;35467);
int seqSearch(z;89703;n); //method call 4 key where key in the right half
int binSearch(z;first;last;89703);
public int seqSearch(int z[];int key;int n)
long start = System.currentTimeMillis();
int count=0;
int ans=-1;
for(int i=0;i<n;i++)
if z=key
count++
{ans=i
break;}
return ans;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
public int binSearch(int z[];int first;int last;int key)
long start = System.currentTimeMillis();
int count=0;
if(last><first){
count++;
index=-1;
else
count++;
int mid=(first+last)/2
if(ket=z[mid]{
index=mid;
else
if(key><z[mid]){
index = binSearch(z[];first;mid-1;key);
else
index=binSearch(z[];mid+1;last;key);
return index;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
and what about the dukes, offer 10 (never to be awarded, of course)
do this, then sit back and watch the replies roll in.

HT201541 I need help with updating my browser.

I need help with updating my browser. Its telling me that Safari is outdated.

That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Need help for Update and cancel SalesOrder

Hi All,
I written java code for create sales order based on salesquotation,now i want to update and cancel sales order ,i need help to update and cancel salesorder.
can give any related links for update and cancel salesorder.
Thanks and Regards,
Srinivas

Hi srinivas.L
It is simple, here is some sample code. You must use getbykey to get the document. Then once you got it you can make whatever changes you need. Then update it. where i have oOrder.Update() you can have oOrder.cancel
Dim oOrder As SAPbobsCOM.Documents
        oOrder = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
        If oOrder.GetByKey(530) Then
            oOrder.Lines.SetCurrentLine(1)
            oOrder.Lines.WarehouseCode = "01"
            If oOrder.Update() <> 0 Then
                MsgBox(oCompany.GetLastErrorDescription)
            End If
        Else
            MsgBox("Nothing found")
        End If
Hope this helps

Dataguard - logical standby - need help - not updating data at commit

Hi
Need help ?
We have logical standby setup where data is not updated at standby when committed at Primary. It only updates when alter system swith logfile.
On Primary:
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(online_logfiles,primary_role) db_unique_name=xxStandby'
On Standby:
we have already created standby redo logs ( 1+ # redo logs)
we used ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE NODELAY;
The data only ships when we do the ALTER SYSTEM SWITCH LOGFILE whereas it should so when data is commited on the primary.
Is there anything we are missing or need attention.
Please help
Thanks you so much

Yes, I have standby redo logs = ( 1 + # redo logs on the primary) and are of same size.
I also changed the log_archive_dest_2 setting for valid_for to ALL_LOGFILES, but the performance is still very slow... we are now overr 9 hrs behind the primary.
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(ALL_LOGFILES,primary_role) db_unique_name=xxStandby'
The Logical standby performance reallly not good at all. trying to increase sga/pga more ... hoping this will speed up some
Paul

Need help setting up FCE 4 PLEASE

OK, I'm NOT a professional, just need help setting up.
Just purchased FCE 4. Need to set up my Sony HDR SR11. I've already recorded most of my stuff in HD SP. Can someone Please help me set up?
thanks

Thanks for the info.
I updated and did a search in my manual for Log and transfer which didn't go to anything I can figure out. Sorry, I don't have time to read 1152 pages.
Can anyone just tell me how to get this going? There should be a simple set up correct?

My iPhone turned off all of sudden and doesn't want to turn on again i need HELP ASAP!!! please

while i was on google today my iPhone 4 turned off all of a sudden and only turns on with the wall charger i really need my phone so can some please help!!!!! i reseted done alot and still nothing please help!!!

Reset the device by pressing and holding the home and power buttons until the white Apple logo appears (about 15-20 seconds).
If this does not work, plug the device into a wall outlet for atleast 20 minutes and then try a reset.

MAC OS 10.6.8 Using Safari 5.1 Needing Help With Updating Adobe Flash

Hello-
Recently Adobe Flash installed an icon in my System Preferences and when I click the icon there are several tabs. One allows updates to check automatically. It says it will install the latest version of Flash without having to remove the previous version, but I have never been told that a newer version is available unless I clcik "check now." although "Check for updates automatically" is checked, I do not know where it tells me a newer version is available. Also, there has been 5 "newer versions" available since this icon was installed in System Prefeences, I have only found out about the newer versions when I clicked "Check Now." If I read that with this new way to install the latest Mac version of Flash does not require me to uninstall the previous version of Flash how do I install the most recent version of Flash? Does it come in an email?
Since it is not telling me that there is a more recent version of Flash unless I click "Check Now" should I still do it the way I used to install the latest version of flash? (The way before this icon was added to System Preferences)?
I would appreciate help with updating Flash to the most recent version. I used to uninstall the older version, restart the browser and download the most recent version and install it. It always worked find but this was before there was an Adobe icon in my system Preferences.

Hello,
The way you used to do this (uninstall, restart the browser, etc.) is still definitely valid and probably the "safest" way to get a new version installed. Uninstalling shouldn't be required, but it definitely doesn't hurt. If you feel comfortable doing it the old way, please feel free to continue using that process.
As for notifications, this is a bit trickier, but in general you should be notified within 30 days (or so) after a new player is released. This usually occurs when the browser loads swf content. Clicking the button will, like you mention, immediately check. Another alternative to finding out when a new player is released is to subscribe to our Flash Player Releases feed.
Is there a way to be automatically notified when a new Flash Runtime release is made?
Thanks,
Chris

Need Help with Migration...Please

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

Hello,
I need help! I just bought a new MacBook Pro. In house, I have a two year old iMac running Mavericks (all updated) and an iPhone and iPad (both running the most current OS). I also have the iMac connected to a Time Capsule. Here are my questions:
1. As I am not replacing the iMac, but rather adding a MacBook Pro to the mix, should I migrate the software, settings, files, etc. from the iMac to the MacBook? Is there an issue running computers which are clones in the same environment? Is it a bad idea to migrate?
2. Assuming # 1 is okay to migrate, what is the best way? Is it best directly from the iMac or from the Time Capsule? I do have a Thunderbolt to Ethernet adapter on hand.
3. Is there a link that would help me navigate the migration?
4. How long should the migration in #2 take?
5. Will I need to change any settings on the iMac, iPhone, or iPad afterwards?
6. Will my contacts and calendar sync with iCloud automatically, or do I have to change a setting on the MacBook to make that happen?
7. Also, as I'm leaving town tomorrow and want to take the MacBook Pro with me and I'm unsure I've the time to Migrate and tweak, can I jus turn on the MacBook (still not turned on), use it as it is, and then migrate when I get back home?
Any help would greatly be appreciated. Thank you!

Need help with threads?.. please check my approach!!

Hello frnds,
I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
Hope I make clear.. what am trying to do!!
My approach is like..
1. Have two buttons.. START and STOP on Frame..
START--> pressed
2. check marker("$" sign.. placed in beginning of file during start).. on file..
     read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
     Step 2.. continously..
3. STOP--> pressed
     until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
Question is:
1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
please modify my approach.. if u find anything odd..
Thanks a lot in advance
gervini

Hello,
I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
---master.java---------------------------------------------------
import java.sql.*;
import...
public class Master {
public static void main(String args []) throws SQLException, IOException {
//create connection pool here
while (true) { // start loop here (each loop takes about five minutes)
// set values of variables
// select a slave process to run (from a list of slave programs)
execute selected slave program
// check for loop exit value
} // end while loop
System.out.println("Program Complete");
} catch (Exception e) {
System.out.println("Error: " + e);
} finally {
if (rSet1 != null)
try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
connection.close();
-------end master.java--------------------------------------------------------
This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
Your help is greatly appreciated. Thank you.
Logan

Need help with freezing...please respond!

I just got my reconditioned ipod mini yesterday. The problem is that at the main menu the scrolling mechanism works (thumb rotation), but the select button does not (I can't get into any submenus). I called Apple support, and they said to reset. I did this; the mini worked OK once, but then started to freeze up again, and now, no matter how many times I reset, it doesn't help...I'm stuck at the main screen, and the select button won't do anything. The apple support guy says he has to reset his mini 2-3x a week, but I've been able to make my ipod work only once or twice, and I've had it a day. PLEASE HELP.

I keep trying that too...doesn't seem to help. Have tried plugging it into the AC adapter and resetting; doensn't help. Updated my ipod/itunes software; doesn't help. I don't want to try restarting the ipod; I just spent 6 hours putting music on itunes today, and don't know how to create a backup...and I read the restart instructions and don't know how to do all of the steps. Its amazing to me that this unit works so poorly literally the first day out of the box. How disappointing.

HT4623 Need help to Update my Ipad2 please

Similar Messages

Maybe you are looking for