Dataguard - logical standby - need help - not updating data at commit

Hi
Need help ?
We have logical standby setup where data is not updated at standby when committed at Primary. It only updates when alter system swith logfile.
On Primary:
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(online_logfiles,primary_role) db_unique_name=xxStandby'
On Standby:
we have already created standby redo logs ( 1+ # redo logs)
we used ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE NODELAY;
The data only ships when we do the ALTER SYSTEM SWITCH LOGFILE whereas it should so when data is commited on the primary.
Is there anything we are missing or need attention.
Please help
Thanks you so much

Yes, I have standby redo logs = ( 1 + # redo logs on the primary) and are of same size.
I also changed the log_archive_dest_2 setting for valid_for to ALL_LOGFILES, but the performance is still very slow... we are now overr 9 hrs behind the primary.
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(ALL_LOGFILES,primary_role) db_unique_name=xxStandby'
The Logical standby performance reallly not good at all. trying to increase sga/pga more ... hoping this will speed up some
Paul

Similar Messages

Need help in UPDATE data in SQL Query

Hi all,
I am trying to update data in the sql table as per below screenshot but couldn't able to do it. Can anyone help to update the data as I mention in screenshot.Appreciate you help.Thanks.
Yellow highlighted columns are source
Green highlighted columns are target
Colored data should be update as per source data in sql table.Data is not static as it might have more rows to update and query should be bit dynamic.
Maruthi...

You have already asked this question once. You did not get any good answers, because you the information you gave was insufficient. And I'm afraid that the information is still in sufficient.
Or more exactly, from the example you have given, the answer is: can't be done. And the reason it can't be done, is as I explained in response to you first thread: there is no information in the data to from which we can deduce that Clorox Company
should be under "Week 1-1,K.B,F". The fact that rows are listed in a certain order in the screenshoot is of no importance, because a table is an unordered object.
But you said in another post that you have a timestamp column. Maybe that column is usable - maybe it is not. But at least it is a key that you have more columns that the ones you show.
The best way to get help with this type of problems is to post:
1) CREATE TABLE statement for your table(s).
2) INSERT statements with sample data.
3) The desired result given the sample.
4) A short description of the actual buisness problem you are trying to solve.
5) Which version of SQL Server you are using.
This makes it easy to copy and paste into a query window to develop a tested solution. Screenshots with an insufficient amount of data is not going to help you very much.
Erland Sommarskog, SQL Server MVP, [email protected]

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. Please help!

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto. I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken. I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported. I greatly appreciate some assistance!

All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
Regards
TD

Please i need help i updated my iphone 3gs and now its not activating

i need help i updated my iphone 3gs and now its not activating

What happens when you try to activate the iPhone?
If there is an error message, what is the exact wording of that message?

Oracle DataGuard Logical Standby

Hi , I'd like to know what are the premisses to make a standby logical replication.
I have two environments (production and standby) with different number of processors and storage.
I'd like to know if it's possible to create data guard solution with these two environments and what are the premisses that I need aware to install the solution.
Thanks in advance.

Hello;
Yes the storage ( as long as you have enough space ) and cpu don't matter.
You can use hardware that's quite a bit different and it will work fine.
You can also create a Logical Standby fro a physical standby.
These notes may help :
NOTE 413484.1 - Data Guard Support for Heterogeneous Primary and Physical Standbys in Same Data Guard Configuration
Mixed Oracle Version support with Data Guard Redo Transport Services [ID 785347.1]
Logical Standby's don't seem to be very popular and the support base suffers because of this. I would consider a physical standby with Active Data Guard if costs allow.
Active Data Guard makes an excellent "Reader" database plus I believe your switchover and failover options are much better than a Logical Standby.
Oracle DataGuard Logical Standby Setup :
http://orajourn.blogspot.com/2007/02/setting-up-logical-standby-database.html
http://garyzhu.net/notes/DataGuard.html
Best Regards
mseberg
Edited by: mseberg on Apr 25, 2012 10:07 AM

Need help in oracle data recovery

Friends ,i need help in oracle data recovery.
I had an oracle 8i database running on windows.
For some reason Windows operating system crashed.
It is not booting up.
I dont have current backups.But my database physical files are in the disk.
Controlfile,datafiles and redo log files are there.
Is there any way I can recover my database?
Please help in this issue.
regards
Ajith

HI citrus,
thanks for the reply.
I have installed database 9i on the same PC after O/S reinstallation.
You are saying that ,I need to keep oracle root folder same as that of my old installation ,and copy control files,redo log and data files in exactly same folders as that of old database,and then start the database?
thank you for your patience and support.
regards.,
Ajith

Need help in converting date format

Hi,
Need help in converting date format from 'DD-MON-YYYY' to 'YYYY-MM-DD' in an .rtf template as I believe xml publisher supports the date format as 'YYYY-MM-DD' only.
Thanks,
Raj.

I got the same problem, anyone know how to solve this problem? I allready found some date functions on http://blogs.oracle.com/xmlpublisher/2008/09/date_functions.html . I also tried <?xdoxslt:month_name(xdoxslt:get_month(xdofx:substr(NEED_BY_DATE, 4,3)), $_XDOLOCALE), 0, 'nl-NL')?>, but then it returns a namespace error (Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'xdofx' used but not declared.). Anyone know how to fix this?
Edited by: user11165753 on 7-dec-2009 23:50

ORA-16821: logical standby database dictionary not yet loaded

Dear all,
I have a dataguard architecture with a primary and a standby database (for reporting stuffs). Since I upgraded physical standby to logical standby, I receive this error !
ORA-16821: logical standby database dictionary not yet loaded
If someone has an idea, should be great !!
Thanks
oldschool

Hi,
Ok I applied :
SQL> ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Database altered.
SQL> alter database start logical standby apply immediate;
Database altered.
SQL>
And now I received this :
ORA-16825: Fast-Start Failover and other errors or warnings detected for the database
Cause: The broker has detected multiple errors or warnings for the database. At least one of the detected errors or warnings may prevent a Fast-Start Failover from occurring.
Action: Check the StatusReport monitorable property of the database specified.
What does it mean to check the status report.....
I found this about monitorable status report !!
DGMGRL> show database 'M3RPT' 'StatusReport';
STATUS REPORT
INSTANCE_NAME SEVERITY ERROR_TEXT
* WARNING ORA-16821: logical standby database dictionary not yet loaded
DGMGRL>
What can I do ?
Thanks a lot
oldschool
Edited by: oldschool on Jun 4, 2009 2:37 AM

I just got logic and need help i dont know how to make a track at all

i just got logic and need help i dont know how to make a track at all

Pancenter wrote:
There was a time not too long ago when people respected the incredible amount of talent that contributed to this software...Everyone -wanted- to learn about the craft and "art" that goes into being a good engineer, musician, producer...etc.
Beginner's did enough reading and experimentation to at the very least, ask an intelligent question.
pancenter-
Hey Pancenter there are still lots of us about.
I wouldn't take the original post too seriously - I may of course be naive but it sounds like it could be a troll to me!
I learn a lot from reading the posts of the likes of you, Erik, Bee Jay, sampleconstruct, noeqplease etc so I hope you guys don't become too dispondent when you see posts like these.
By the same token, I hope the Logic team continue to use their talents to develop powerful software that caters for the professional user, while allowing Garageband to continue to do its (excellent) job of providing for its market.

HT201541 I need help with updating my browser.

I need help with updating my browser. Its telling me that Safari is outdated.

That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

HT4623 I need help ASAP updating my jailbroken iPod touch 4th generation

I have a 4th generation iPod that's jailbroke by Cydia, I need help to update it to IOS 6. From my ipod

You can't, over-the-air update did not become available until iOS 5, you show iOS 4.1.
And we cannot discuss jailbroken devices here per the moderators.

Background job not updating data for some steps of program

We have created a custom program and submitting the standard program RPRCCC_READ_KR1025
which is used for conversion of AMEX credit card files.
Since this program can update data for 1 company id at a time,we have created a background job
for that program with 10 steps and 10 variants of data related to 10 different company codes.
when this job is executed it is not updating data for all the 10 files , sometimes it updates 5,7,etc...
If we execute the other files which didnt update in job manually they are getting updated.
All the files executed with that program can be seen in PRTA transaction.
Regards,
Gautham.
Edit: Solved.
Since the standard program updates the database every time with commit work
there should be some time until the next database update,so we can use wait command
after the submit statement which will do the trick.
Edited by: Gautham Vangaveti on Aug 5, 2010 7:20 PM

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

Need help in transfering data to my new iphone4 from my old iphone3

Hello, just received my new iphone 4, need help in transfering data from my old iphone 3 photos, emails etc. apps, thank you

http://support.apple.com/kb/ht2109

Add new datafile to logical standby database but not in primary

Hi,
Is it ok to add a new datafile to the SYSAUX tablespace on the logical standby database but not on primary? We are running out of disk space on the partition where SYSAUX01.dbf resides so we want to add a new SYSAUX02.dbf in another partition which has space. but this will only be on the logical standby not on primary, there is still lots of space in primary. standby_file_management is MANUAL and this is LOGICAL STANDBY not PHYSICAL.
Is this possible or where there be any issues?
Thanks.

Logical Standby can differ from Primary, it can have extra tablespaces, datafiles, tables, indexes, users ...
HTH
Enrique

Need help for Update and cancel SalesOrder

Hi All,
I written java code for create sales order based on salesquotation,now i want to update and cancel sales order ,i need help to update and cancel salesorder.
can give any related links for update and cancel salesorder.
Thanks and Regards,
Srinivas

Hi srinivas.L
It is simple, here is some sample code. You must use getbykey to get the document. Then once you got it you can make whatever changes you need. Then update it. where i have oOrder.Update() you can have oOrder.cancel
Dim oOrder As SAPbobsCOM.Documents
        oOrder = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
        If oOrder.GetByKey(530) Then
            oOrder.Lines.SetCurrentLine(1)
            oOrder.Lines.WarehouseCode = "01"
            If oOrder.Update() <> 0 Then
                MsgBox(oCompany.GetLastErrorDescription)
            End If
        Else
            MsgBox("Nothing found")
        End If
Hope this helps

Dataguard - logical standby - need help - not updating data at commit

Similar Messages

Maybe you are looking for