HT4623 Problem Installing IOS 7

IPAD 3  Trying to download IOS7. Downloading goes along until it says "preparing for installation. Then up comes error message. No number on the error.

I would hold down the lock screen button (top) and the home button (on screen) for about ten seconds. The ipad will turn off then the apple icon will appear. Let go when the icon appears and then try again.
Also you can update your itunes and then just use itunes to update your device.
Hope this helps
-Steven

Similar Messages

  • HT4623 Ater installing IOS 6 for my iphone 4,some apps are hang sometimes and Mail apps totally hang ,tried to reset again and again but still hang

    Ater installing IOS 6 for my iphone 4,some apps are hang sometimes and Mail apps totally hang ,tried to reset again and again but still hang.How to solve this problem??

    well in thatcase, i need another help .
    thanks for your instant reply.
    i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
    because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

  • HT4623 Just installed IOS 6. Now when I try to check email om Yahoo I get this, MFMessageErrorDomain error 1032. What should I do. Just got the iphone4, after this wish I had not.HELP!!!

    Just installed IOS 6. Now when I try to check my email on Yahoo I get this error. MFMessageErrorDomain error1032.
    Just got this phone, now wishing I had not......HELP!!!!
    Read in net to uninstall Yahoo mail and reinstall....DID THAT, still same.

    Hi there,
    Do you have icloud account? You need firstly turn off find my iphone (by go to icloud.com -->sign in --> go to "Find my iphone" and erase your iphone in it). And then you restore your iphone with DFU mode.
    When you erase your Find my iphone and if you can not restore, your iphone has a problem with hardware.
    Some infos can help you.
    Kind regards,

  • HT4623 error installing IOS 6 in Iphone 4 "unable to install update"

    i was able to download the iOS 6 update, then i go to Settings>general>software update>install now, but after i agree to terms it says: "verifying update" for a few seconds, then i get this error
    Unable to install update
    An error occurred installing iOS 6.
    Please help!!

    I don't understand what you did. There are 2 ways to update. Nothing to download. If you downloaded something you did it wrong.
    1. On the phone go to Settings/General/Software Update. Follow instructions on the screen.
    2. Connect the phone to iTunes and click the Update button on the summary screen in iTunes.
    There are 2 situations where these won't work. 1. The phone is jailbroken. 2. You have the beta iOS 6 on your phone. For that you need to get the update from a developer.

  • HT4623 After installing IOS 6.1.3 I am now unable to install any app.  I hit the "install" it asks me for my password and then is goes back to install.

    After install iOS 6.1.3 everytime I attempt to install any app, I hit "install", it aks me for my password and then clocks for a couple of secs and then goes back to "install" without installing.

    Have you tried a soft reset? Hold down the home and lock buttons until you see the apple icon appaer then let go. If this doesnt work, open iTunes, conect the handset to the computer and do a full restore.
    Hope this helps.

  • Problem installing ios 6

    while installing ios 6, the ipod otuch turned off alone. when i turn it on, the apple appears and then the screen goes white and appear in this a gray line in the bottom of the screen. someone did the same? Can you help me please?

    OK my friends, It seems like we encountered an important bug of IOS 6 affecting IPOD, I just have revive my Ipod Touch by connecting it to another  USB port, maybe you'll have to connect it to another computer if doesn't work.  Then if you are lucky, a minute later (at least) iTunes will show up, then a message of Restoration required will appear, do it, no other solution I have found. The bad news is you'll lose your Ipod data. I will never trust blindly in a new IOS version, I can't synchronize my Ipod anymore,please IF ITUNES ASK YOU FOR IOS UPDATE for your IPOD to version 6, SAY A BIG NO, THANK YOU.

  • HT4623 problems w/ ios 6.0.1

    iphone_4s home button won't work w/ ios 6.0.1

    I recently installed iTunes 11, & just got back from vacation so didn't install ios 6 before I went (didn't want the issues I'd heard about), & when I came back 6.0.1 was available.  Thinking this would be better I let iTuenes install this w/o ios 6 first (don't know how to do that if I wanted to).  I haven't been able to find anywhere how to go backwords or even how to download the ios's w/o software update & that always gives you the lastest one.
    I think I'm gonna start up from an older backup drive w/ 10.7 & see if I can do a restore w/o an upgrade for now.
    I've been messin' w/ this all day & it's getting old, though I would like some of the features of 6 & presumably the fixes in 6.0.1.

  • HT4623 Problems using ios 7 on iPad 2

    I have problems using ios 7 on my iPad 2:
    1) Apps are crashing (Safari, Apps that show text) after I select a text and the magnifiying glass appears.
    2)   heavy apps (Dungeon Hunter 4, Robocop) are crashing unexpectedly.
    How can I a fix for this problems?

    First, try rebooting:
    Rebooting your iDevice
    Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The iPad should begin to start up.
    If that doesn't help, then delete the third-party apps and then redownload them.

  • HT4623 i'm having a problem installing  ios 7 on my iphone 5

    hi i want to download the new ios 7 but somethig goes wrong everytime i want to download it , i've been trying since 12:30 and i just can't do it

    Apple's servers are probably very busy. You may want to wait for a little while before trying again.

  • HT4623 After installing iOS 7 my microphone isn't working. No recording , no one can hear me on Skype

    After installing ios7 my microphone isn't working.  No one can hear me on Skype.  Recording device arnt working too.  I rebooted the device as well downloaded Skype again.   Please help me

    A restore will not work either.  I went to the Apple genius bar and they did everything, but nothing worked.  "It is your hardware".   No, it is not.  It is Apple's IOS 7 software that was not properly coded/tested before they released it.  Now they will not own up to the problem.  There are too many people with the same issue that suddenly happened after the IOS 7 install.  Come on, Apple.  Fix this!  These are expensive devices and many of us will not buy another iPad if we run a risk like this.

  • Problem installing IOS 5

    I try to install IOS5 in mij iPhone4. I got the massage that there was a fatal problem. Now my phone want to be connected to iTunes. Itunes don't see my phone anymore (I reinstalled iTunes allready)

    Enjoy.

  • HT4623 I installed iOS 7 last night and when I started the i-pad this morning, it ask for a password. I did not set a password and now my i-Pad is disabled and I can't use it, can you help?

    I up loaded iOS7 last night and when I opened my iPad this morning, I was ask for a password. The problem is, I did not set a password and when I used the 4 digits I would normally use, the i-Pad disabled and I cannot get it open. Can anyone help?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • FB 4.5.1 problem installing iOS application

    I have gone through one of the Adobe tutorials to create the Twitter Trends mobile application using FB 4.5.1.  I then went through the well-documented process to install this app on my iPhone (signing up as an Apple developer, setting up the phone, etc).  I am able to produce the .ipa file needed to install the app on my iPhone.  However, when trying to install via iTunes, I get the following error:
    The app "<appname>" was not installed on the iPhone "<iPhone>" because it is not compatible with this iPhone.
    Has anyone seen this error before?  The iOS is up to date (4.2.1) as is my version of Flashbuilder.

    So sad ... guess I can't read.  Need to trade this thing up anyway.
    Thanks -

  • Problems installing iOS 7.0.3 on iPhone 4S

    What a pain!  It hung during the update, got stuck in one of the verifying phases (while connected to iTunes), went into recovery mode, then I kept getting the "USB Device needs more power" error message, which messed up my restore.  Finally I plugged it into a direct USB port instead of one of the ports on my keyboard, and it seems to be restoring (finally).  Never had a problem with an update before til now. 

    What did not work?
    If help is desired, stop being vague and provide specifics of the problem.

  • HT4623 i installed IOS 7 on iPhone 4 and it is asking for a rescue email address but it won't accept anything so i can't complete the install any help out there?

    Cant get ios7 to accept rescue email on install security

    If you have an Apple ID and iCloud account, use the iCloud email address and see if that works.

Maybe you are looking for

  • Solution Directory

    Hi all Could you please assist. I want to make sure that my Landscape is setup correctly for the "graphical" display to work in the Solution directory. i have used SMSY to create everything. I have a DEV, QAS and PRD on ECC6. When I run SOLUTION_MANA

  • Field Defaults by Layout (or User Role)  ?

    Hi My company has finally moved to the R14 platform and I am in the process of setting up default values for some fields. I've noticed that a default value cna be set at the object level, but I'm wondering if a field default can differ by role or lay

  • How do I reset the open command in Bridge?

    In Bridge, when I double click to open an image in Photoshop, it opens in something called Windows Mail. When I look at the "open" menu it gives Windows Mail as the default program to open images. How do I reset this to open in photoshop??

  • Can't find CS2 serial to install CS3 upgrade version (*@*! Yosemite)

    Hi all, Am having to re-install my CS3 (old I know, but still does the job) after having to wipe my hard drive after making the mistake of upgrading my OS to Yosemite... trouble is, as it was the upgrade version (had to install CS2 first) I now need

  • Have SeaGate HD as backup, not sure how to handle multiple copies

    That's the main issue. Several backups created up to 4x the copies of everything. It never occurred to me to actually scan the backup hard drive of what it had done. Then installing a fresh load back onto laptop, It was noticed. iPhoto came out the w