HT4859 If the SMS messages are not a choice for the data to backup, along with things such as "camera roll" and other apps, does that mean it isn't being backed up?

I want to backup my text messages but it's not a choice. Does it still backup? Or do I need to figure out how to make it a choice?

It will still back up.

Similar Messages

Component level message are not coming up for the declarative component.

Hie
i am using ADF faces with jdev 11g.
i have created a declarative component and dropped it in my web application.
This component provides an action listener to write some app specific code.
in the listener i wrote a component level error message.
on running the app i can see that it is going to that error but it is not showing it up on the ui. same code works for other adf faces components that comes by default in the component pellete.
I tried setting the clientComponent attribute to true as well but no luck.
any idea if something wrong with declarative components?

Frank,
My declarative component is dropped on my jsff. In this pages i have dropped a af:messages as well.
There is a small button in my component on which i have bound an action listner.
In the action listener i have a validation on the failure condition of which i have the code like:
if(bean == null || bean.isAuthenticated() == false){
FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, "You must be logged in to vote up");
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage(getVotingQuesComponent().getClientId(context), msg);
AdfFacesContext.getCurrentInstance().addPartialTarget(getVotingQuesComponent());
return;
So, i m sure my flow is going in this part of code but i dont see the message coming up marking my declarative component.
However, if i replace this message by a page level error message then that comes up fine.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

Back up all data. Rebuild the mailbox.

I iphone 4 is not sending texts to my friends and family with iphones. The blue messages are not going through. My green messages are going through. Help!

My Ipone is not sending text messages. i can recieve the messages, but my replies are not being sent.. this seems to only be an issue to sendin to other iphones. The blue messages are not being sent. if the box is green, the meessage is sent.this seems to ahve started after i down;oaded the latest operating system. HELP!!

Welcome to the Verizon family, ivpacks! I regret to learn that your alarms didn't work. I also regret that there is a problem with the messages. Have you tried the alarm again? Does it still not work? For instance, just set the alarm for a couple of minutes away to ensure that the alarm goes off.
When you send a text, do you get an error? If you power the phone off/on, do the messages send? This particular issue is expecting a software update to resolve the issue with texts and picture messages.
I believe that you have chosen a great device, but keep in mind that there is a 14 day exchange period. If you exchange for the same make/model, you will not pay the restocking fee.
If you do exchange for a different make/model, there is a $35.00 restocking fee.
TamaraH_VZW
Follow us on Twitter @VZWSupport

I bought the season 7 pass for Doctor Who, but the new episodes are not showing up for download. Who can I contact to find out why?

I bought the season 7 pass for Doctore Who, but the new episodes are not showing up for download. I've been all over the support page, I even looked up my purchase history and there is are none showing and I even bought last weeks episode, The Bell's of St. John. Who can I contact to find out why I'm not getting the rest of season 7 for download?
Thanks,
ChristyQ

Garmin is sending you to Apple because it is Apple that would have to give you a refund as the actual point of sale. However, Apple states all sales are final.
Apple is sending you to Garmin because it is Garmin's fault their maps are out of date and Apple doesn't write the software. They may not even be looking that deeply and simply perceiving it as a programming "bug" it is up to Garmin to solve.
Who know whose fault it is that Garmin isn't getting up to date data to put in their maps.
Ultimately I think you stand the best chance in getting a refund from Apple though it isn't guaranteed. Apple is the cashier. You just have to convince them this isn't just a line of code omitted from an application and isn't something that will be soon corrected by Garmin. Make it clear it isn't a problem with the application running on your device, it is a problem with the data it contains. Either that or you have to hope Garmin will feel so bad about it they will delve down into their slush fund and send you a refund.

I have bought the CS5 but can not find serialnumbers for the whole suit. Only for PS.

I have bought the CS5 but can not find serialnumbers for the whole suit. Only for PS.

Hi,
Which CS5 suite have you purchased?
This document has guidelines on locating your serial number depending on the mode of delivery of your purchase:
Find a Serial Number
You also mention that you are able to locate the serial number for Photoshop. Did that come as a part of the suite or did you purchase Photoshop as a standalone application?

I just downloaded i tunes to my new computer. I had an account on the old one. I received an error report - The file "I Tunes Library .itl" cannot be read because it was created by a new version of I Tunes. What does that mean?

I just downloaded I Tunes to my new computer. I had I Tunes on old computer. When I clicked on the icon on desktop I received the following pop-up.
the file "I tunes Library .itl" cannot be read because it was created by a new version of i tunes. What does that mean?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

Error Message: Can not generate mask for the LMB peripherals

I've added a bunch of perhipherals to my microblaze project and used the Generate Addresses button. I get the below error messges when I try to generate a net list. ERROR:EDK:3193 - issued from TCL procedure
   "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
    C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:ilmb_cntlr) - Can not generate
   mask for the LMB peripherals! An address decode mask is assigned to all LMB
   peripherals connected to the MicroBlaze processor. The address decode mask is
   based on a set of decode bits that distinguish the LMB address space from the
   OPB/PLB address space. The error message indicates that a set of decode bits
   can not be found to generate a mask. Please modify the address map of the
   slaves connected to OPB/PLB to use a common address bit.
ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:ilmb_cntlr -
   E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
   C_MASK using tcl
ERROR:EDK:3193 - issued from TCL procedure
   "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
    C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:dlmb_cntlr) - Can not generate
   mask for the LMB peripherals! An address decode mask is assigned to all LMB
   peripherals connected to the MicroBlaze processor. The address decode mask is
   based on a set of decode bits that distinguish the LMB address space from the
   OPB/PLB address space. The error message indicates that a set of decode bits
   can not be found to generate a mask. Please modify the address map of the
   slaves connected to OPB/PLB to use a common address bit.
ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:dlmb_cntlr -
   E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
   C_MASK using tcl I understand its complaining about the mask values, but I'm not exactly sure why. Here is the address map it shows:Address Map for Processor microblaze_0
(0000000000-0x00003fff) dlmb_cntlr    dlmb
(0000000000-0x00003fff) ilmb_cntlr    ilmb
(0x81800000-0x8180ffff) xps_intc_0    mb_plb
(0x81c00000-0x81c0ffff) xps_ll_temac_0    mb_plb
(0x83400000-0x8340ffff) Generic_SPI    mb_plb
(0x83c00000-0x83c0ffff) xps_timer_0    mb_plb
(0x84000000-0x8400ffff) RS232    mb_plb
(0x84400000-0x8440ffff) mdm_0    mb_plb
(0x8c000000-0x8fffffff) mpmc_0    mb_plb
(0xfffff000-0xffffffff) xps_gpio_0    mb_plb Any thoughts? I was unable to find another instance of this error message.

Version 11.3 I actually figured it out, its rather odd that the generate addresses button doesn't do this automatically. It appears that the mask was set to trigger use of the cache on a single bit. 0x00800000. I had enough devices added where automatic address generation was using the most significant bit meaning that bit was falling within other address spaces. I changed it to 0xFFFFC000. (Basically telling it to match addresses if all address signals above 16KB are zero). I don't know if that is the proper way to do it, but it accepted it. Now I'm fighting with some stuff regarding an FSL bus I added that apparently isn't quite properly setup, so I haven't found out yet if the processor likes that address mask. But the tools appear to like it.

I have a message: "Could not get session for the OEM Repository."

Dear Sir,
I browsed reports that has been published in OEM. But I received an error:
"Could not get session for the OEM Repository. Check to ensure that the OEM Repository is up."
What can I do?
Thank a lot

You will need to go into your Files and locate the song. By default, iTunes saves songs in the iTunes Media Folder which can be found in the following locations:
Mac OS X: /Users/username/Music
Windows XP: \Documents and Settings\username\My Documents\My Music\
Windows Vista: \Users\username\Music\iTunes
Windows 7 and Windows 8: \Users\username\My Music\iTunes
If you locate your song file, when you try to play it in iTunes, you will be given an option to locate. Navigate to the file in the pop up window and iTunes will re-path the file location.
Most people encounter this issue when moving to a new computer or if you have your music saved on an external drive or folder that you have since moved or removed. The imperative part is finding the song so you can re-map it.

SMS messages are not saved on iphone on ios 7.0.4

After updating iPhone 4S to ios 7.0.4 it was a week before I realized that there was a problem with sending and receiving messages. They appeared to be hanging at about 90% when sending and would stay as "sending" even when delivered (to the other iphone I have). An incoming SMS wouldn't open, i.e., showed no content. Tried all the suggestions re resetting network settings, etc etc etc but nothing worked. I have done a complete restore of the ios and I have sent and received a SMS successfully but they are not being saved. Sent message has disappeared and incoming message is read but isn't there later, just disappears. Vanishes. I like to keep some messages to refer back to sometimes while others I am happy to delete almost immediately.
Is this a problem or is it a "feature" of ios 7?

Hi,
So you are unable to access Notification Centre and Control Centre from all screens including the home screen?
You can try activating AssistiveTouch by "Settings > General > Accessibility > AssistiveTouch > AssistiveTouch: ON".
In some cases activating this feature has known to fix this issue (whilst the feature is active). I cannot think of any other immediate fixes. Hopefully Apple will address this issue soon in a forthcoming update to iOS 7.
Hope this solves your issue!

My sms messages are not being received by another orange phone

Hi, my Dad is on an orange network and so am I. i have an iphone4s but he is not receiving any of my sms texts. I am receiving his ok though.
Any suggestions please? Thanks.
My Dad has a Samsung X.

WhiteCreekGardens,
Sorry to see the trouble you are having with messaging. One of the most basic things we want to use our phones for. Let’s see if we can get that working again. Try resetting the messaging app: http://vz.to/1sBTIq4 . Then reseat your SIM card: http://vz.to/1lAT2Ki . Retest and let us know how it’s working.
BrianP_VZW
Follow Us on Twitter @VZWSupport

My apple mail flagged messages are not showing up in the flagged folder.

my apple mail flagged messages not showing up in the flagged folder ?

All messages finally appeared in "Sent" in Mail.app. But it sure took some time.
Guess there is a severe lag time between .Mac and Mail.app?

How do you make imessage work? The icon is there. You can type in the recipient but are not allowed to hit the send button

How do you make imessage work? We upgraded to verision5. The icon is there. You can type the message but the send button is not available.

There is some instability in iMessage. It is a versatile and confusing app even though there are so few options in its use.
I had issues trying to get iMessage work on both my iPads and my iPhone.
ON the iPhone, turning off WiFi service and then trying iMessage fixed the problem.
On the iPad 2, same thing. Turning off WiFi service fixed it.
On the iPad 1, I took a suggestion from zoomzoom and changed the WiFi network configuration on the iPad to use 8.8.8.8 as a DNS server and then use iMessage. That fixed it. Now I put the DNS back to default and it still works.
I suspect the iPod Touch will have the same fix as the iPad.
If you have a WiFi and 3G iPad or iPhone, try turing off WiFi and see if that fixes it.
Why? (beware, some of this is guesswork)
iMessage can talk SMS to cellphones and smartphones (that are using the cell-network). It can also talk Apple iMessage format to iPhones and iPads whether they are on cell-network or on WiFi. If you are talking to an SMS cellphone, iMessage figures that out and blindly sends your message. If you are talking to a iOS5 device, iMessage figures that out too, checks to see that they are on-line, and then does something different if they are or are not on-line. If you type in an email address, and not a phone number, I think iMessage attempts to see if the email address is registered with Apple (or iCloud or whatever) and if it is not, it does something to let you know, possibly by making the Send button not light up.
In order to register iMessage and an email, you have to let the iOS device see whatever service it is that iMessage uses. That is where the problem happenes. zoomzoom suggested manually setting the WiFi DNS to google's 8.8.8.8 IP address, then run IMessage, and that seemed to fix the problem. Setting the iOS device to use 3G-only (by turning off WiFi) also fixed the problem. I suspect going down to StarBucks or McDonalds and using their WiFi would also fix the problem. Once the problem is fixed, it doesn't seem to come back so I can't test these 'fixes'.
To change the DNS on your iPad find your WiFi networks configuration, click on the blue arrow, touch DNS, backspace over the number that is shown, type in 8.8.8.8 Then click on the WiFiNetworks button at the top of the screen. Now go run iMessage. After that, you can delete the DNS entry again and leave it blank. Your iPad will fill it in from the WiFi router when it needs it.

Chnages in the Graph properties are not getting reflected in the Browser.

Hi,
I have made some changes in the Graph properties in web template,
Eg. : 1. change in color of a series for a columnar type graph
2.change in the Text properties of Graph Series..
When I save the template and try to run in the Browser, these changes are not getting reflected.
Can anybody help me in this aspect ?
Thanks.
Regards.
Amol Bade

Same here :´(
Thanks In Advance
Juan

Any script to cancel the PO which are not taken receipt from the back end?

Hi,
We need to cancel the PO Shipments which are not taken receipts to reverse the encumbrnace budegatory amount. is there any script i can use so that i can cancel all the PO's which are not taken receipts or we need to manually cancel the each shipment by navigating in to the PO summary window using the Tools > Control option.
Please let me know your views..ASAP
Note: We are using the 11.5.10.2 version with encumbrance budgetary funds checking for PO's.
Regards,
Kevin
Edited by: user10960960 on May 6, 2009 3:17 AM

There is no documented,proven and supported way of doing such thing using scripts. Best to do it from front end; use dataloader for large volumes, and data loader in forms playback mode for larger volumes.

HT4859 If the SMS messages are not a choice for the data to backup, along with things such as "camera roll" and other apps, does that mean it isn't being backed up?

Similar Messages

Maybe you are looking for