Component level message are not coming up for the declarative component.

Hie
i am using ADF faces with jdev 11g.
i have created a declarative component and dropped it in my web application.
This component provides an action listener to write some app specific code.
in the listener i wrote a component level error message.
on running the app i can see that it is going to that error but it is not showing it up on the ui. same code works for other adf faces components that comes by default in the component pellete.
I tried setting the clientComponent attribute to true as well but no luck.
any idea if something wrong with declarative components?

Frank,
My declarative component is dropped on my jsff. In this pages i have dropped a af:messages as well.
There is a small button in my component on which i have bound an action listner.
In the action listener i have a validation on the failure condition of which i have the code like:
if(bean == null || bean.isAuthenticated() == false){
FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, "You must be logged in to vote up");
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage(getVotingQuesComponent().getClientId(context), msg);
AdfFacesContext.getCurrentInstance().addPartialTarget(getVotingQuesComponent());
return;
So, i m sure my flow is going in this part of code but i dont see the message coming up marking my declarative component.
However, if i replace this message by a page level error message then that comes up fine.

Similar Messages

  • HT4859 If the SMS messages are not a choice for the data to backup, along with things such as "camera roll" and other apps, does that mean it isn't being backed up?

    I want to backup my text messages but it's not a choice. Does it still backup? Or do I need to figure out how to make it a choice?

    It will still back up.

  • Text messages are not coming in

    apple changed updated my new eamil address in itunes and now my messages are not coming in.help

    Hi nancy183,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Ensure that iMessage is turned on in Settings > Messages.
    To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
    iPhone: Troubleshooting Cellular data
    iOS: Troubleshooting Wi-Fi networks and connections
    iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
    If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
    Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Cheers,
    - Judy

  • I just recently upgraded from a 3gs to a 4s and since i upgraded text messages are not coming in or going out unless i'm texting another iphone?

    I just recently upgraded from a 3gs to a 4s and since I upgraded text messages are not coming in or going out unless I'm texting another iphone?

    http://support.apple.com/kb/TS2755

  • You are not authorized to display the case component, when using copy

    I copied the standard UDM_SPS_CASE_RECORD and created a Z version with no changes, in addition also copied the standard Case Record model with no changes. I have entered my new case record model into my new element and tied both the to case type. When trying to create a case get a message "You are not authorized to display the case component"
    SU53 looks good, and BASIS did a Trace and did not see anything.
    When I change the configuration back to use the standard no issues and case is created. Anybody know what the issue might be?
    Thanks

    dear friend,
    when you get this error on screen type /NSU53 , hit Enter and get a new screenshot
    if you see the message ""The last  authorization check was successful" that means nothing to do with Basis team, it could be a custom message - talk to abaper ;
    but if you see some objects there (Authorization check failed) - please pass to security or basis guys
    ask / try another user which hasn'rt such error and comare the roles you and he/she has - try to find out the difference
    good luck!

  • The binary code for the script is not found error for the Script component - SSIS 2012

    Hi,
    I'm implementing a SSIS 2012 pkg. For a data flow task, I'm using a Visual Basic 2010 script component with an Oracle input flow. For the script component I've an input column and I've created an output column. Inside the script code I've edited only inside
    Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer).
    The written code is:
    If Year(Row.OFFDATAORI) < 1900 Then
    Row.OFFDATAORIconv = CDate(CStr("1900" + "-" + Right("00" + CStr(Month(Row.OFFDATAORI)), 2) + "-" + Right("00" + CStr(DatePart(DateInterval.Day, Row.OFFDATAORI)), 2))
    Else : Row.OFFDATAORIconv = Row.OFFDATAORI
    End If
    It is to note that OFFDATAORI isn't the name of the input column for the script component.
    When I close the script component I've an error about "The binary code for the script is not found".
    Any helps to me, please?
    Thanks

    Hi,
    I've solved. There was a syntax error, a bit hidden.
    Bye

  • Error Message: Can not generate mask for the LMB peripherals

    I've added a bunch of  perhipherals to my microblaze project and used the Generate Addresses button.  I get the below error messges when I try to generate a net list. ERROR:EDK:3193 - issued from TCL procedure
       "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
        C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:ilmb_cntlr) - Can not generate
       mask for the LMB peripherals! An address decode mask is assigned to all LMB
       peripherals connected to the MicroBlaze processor. The address decode mask is
       based on a set of decode bits that distinguish the LMB address space from the
       OPB/PLB address space. The error message indicates that a set of decode bits
       can not be found to generate a mask. Please modify the address map of the
       slaves connected to OPB/PLB to use a common address bit.
    ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:ilmb_cntlr -
       E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
       ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
       C_MASK using tcl
    ERROR:EDK:3193 - issued from TCL procedure
       "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
        C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:dlmb_cntlr) - Can not generate
       mask for the LMB peripherals! An address decode mask is assigned to all LMB
       peripherals connected to the MicroBlaze processor. The address decode mask is
       based on a set of decode bits that distinguish the LMB address space from the
       OPB/PLB address space. The error message indicates that a set of decode bits
       can not be found to generate a mask. Please modify the address map of the
       slaves connected to OPB/PLB to use a common address bit.
    ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:dlmb_cntlr -
       E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
       ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
       C_MASK using tcl I understand its complaining about the mask values, but I'm not exactly sure why.  Here is the address map it shows:Address Map for Processor microblaze_0
      (0000000000-0x00003fff) dlmb_cntlr    dlmb
      (0000000000-0x00003fff) ilmb_cntlr    ilmb
      (0x81800000-0x8180ffff) xps_intc_0    mb_plb
      (0x81c00000-0x81c0ffff) xps_ll_temac_0    mb_plb
      (0x83400000-0x8340ffff) Generic_SPI    mb_plb
      (0x83c00000-0x83c0ffff) xps_timer_0    mb_plb
      (0x84000000-0x8400ffff) RS232    mb_plb
      (0x84400000-0x8440ffff) mdm_0    mb_plb
      (0x8c000000-0x8fffffff) mpmc_0    mb_plb
      (0xfffff000-0xffffffff) xps_gpio_0    mb_plb Any thoughts?  I was unable to find another instance of this error message.

    Version 11.3 I actually figured it out, its rather odd that the generate addresses button doesn't do this automatically. It appears that the mask was set to trigger use of the cache on a single bit.  0x00800000.  I had enough devices added where automatic address generation was using the most significant bit meaning that bit was falling within other address spaces. I changed it to 0xFFFFC000.  (Basically telling it to match addresses if all address signals above 16KB are zero).  I don't know if that is the proper way to do it, but it accepted it.  Now I'm fighting with some stuff regarding an FSL bus I added that apparently isn't quite properly setup, so I haven't found out yet if the processor likes that address mask.   But the tools appear to like it.

  • I have a message: "Could not get session for the OEM Repository."

    Dear Sir,
    I browsed reports that has been published in OEM. But I received an error:
    "Could not get session for the OEM Repository. Check to ensure that the OEM Repository is up."
    What can I do?
    Thank a lot

    You will need to go into your Files and locate the song.  By default, iTunes saves songs in the iTunes Media Folder which can be found in the following locations:
    Mac OS X: /Users/username/Music
    Windows XP: \Documents and Settings\username\My Documents\My Music\
    Windows Vista: \Users\username\Music\iTunes
    Windows 7 and Windows 8: \Users\username\My Music\iTunes
    If you locate your song file, when you try to play it in iTunes, you will be given an option to locate.  Navigate to the file in the pop up window and iTunes will re-path the file location.
    Most people encounter this issue when moving to a new computer or if you have your music saved on an external drive or folder that you have since moved or removed.  The imperative part is finding the song so you can re-map it.

  • Messages are not coming through on both devices.

    My question is this: Why am I not receiving messages or FaceTime calls on both my Mac and my iPhone? iOS8 on an iPhone 5 and 10.8.5 on the Mac. I'd love to get this working again. It used to. I have a guess what it is… I'm looking for direction.

    Hi,
    One gets a message, the other does not.
    That was implied in the first post which Eric asked you to clarify.
    Technically they are different apps  and sometime require different actions to fix them.
    In theory you can use different Apple ID in Messages for the iMessages account and FaceTime.
    However if you use iMessages on the Mac and want to switch to FaceTime using the Video icon then you may confuse the Contact as the incoming identifying info is likely to be different and they may refuse connection.
    Lets presume the Mac gets the iMessages but the iPhone does not.
    On the iPhone Settings > Messages and check the iPhone number is ticked as a Send and Receive ID in the Send and Receive part.
    Although this should be ticked (once the Messages app in On) and greyed out (the User can't access this) it can sometimes lose the setting (I have seen it twice now and the last time was the General release of Yosemite).
    In the case where someone send to the iPhone Number on the sync version will  show on the Mac.  (it does not transfer to the Apple ID and repeat back to the iPhone that way).
    Remove the Apple ID from the iPhone.
    Turn the Messages app Off.
    Set the iPhone to Airplane mode to break with server.
    On "restarting" the iPhone after a few minutes Restart the Messages app.
    Wait until it has Verified.
    Then send (from the iPhone Number as you have no other choice) to the Apple ID (So the Mac gets it).
    Return an iMessages so you know the iPhone is receiving (it will send to the iPhone number in a chat opened this way)
    Add back the Apple ID.
    Restart the Mac version and accept the pop ups about the info the iPhone is using.
    If these is not the issue you will have to be a lot clearer in your info.
    (we cannot see over you shoulder to be able to help in this case)
    9:15 pm      Saturday; October 25, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Is VZ Messages App working?... I'm using the app on my iPhone and iPad amd new received text messages are not coming in. Sent messages is working just fine!

    VZ

        That's odd jway502, let's look into it. Are you not receiving them on the iPhone and tablet, or just on your Messages website? Did you check the native messages app? Do you receive them there? Is it iPhone to iPhone?
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • Pictures are not coming up on the internet

    '''when I open the internet, the pictures do not appear. When I go into some sites that I use frequently, the graphics for the buttons do not appear. '''

    See:
    * http://kb.mozillazine.org/Website_colors_are_wrong
    * http://kb.mozillazine.org/Websites_look_wrong
    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    * Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
    * Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    * Check the exceptions in Tools > Options > Content: Load Images > Exceptions
    * Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
    There are also extensions (Tools > Add-ons > Extensions) that can block images.
    * [[Troubleshooting extensions and themes]]

  • I'm not good with computers or software.  I'm trying to save a RAW Ai file I created.  When I currently save it, the color or characters/size fonts are not coming up in the saved version. How can I save, and have all of my information

    Not going with computers.  Trying to figure out how to save Ai RAW file with colors/fonts etc.  Currently saves, but does not have colors and font information.

    When you say "Colors/Fonts" are not saved, I'm not sure what you mean. How have you determined they were not saved?
    Also, not sure what a "RAW" AI file is. I assume you mean simply a native format .ai file.
    .ai will save all font and color information. It does not "embed" fonts, but it saves what fonts were used and will call the correct fonts when reopened (assuming fonts are available on the system).
    CC 2014 also has a "Package" feature that will collect assets (fonts and images) into a central folder for easy distribution.

  • Business messages are not pushed back to the aq exception queue in case of errors

    Hi,
    I have the scenario, where I have configured the business events in ebs and implemented the soa interface which consumes the event message from wf_bpel_q.
    SOA interface is able to pickup the messages succesfully and same message will be pushed back to the same queue with the status=READY in case of exceptions as well. Ideally as per default functionality of AQ, in case of errors, messages will be pushed to exception queue.
    Please suggest why mesages are not pushed back to exception queue in case of errror scenarios with the status='Errored'.  Please let me know what i have been missing here in the setup.
    Regards,
    Anjana

    Hi Anjana,
    I am not familiar with the SOA interface, so I can't help you in detail, but take a closer look to the following documents.
    Doc ID 1374461.1 ,  Doc ID 1075611.1 , Doc ID 1356146.1
    Maybe you hit a known bug ....
    Hope that helps.

  • My apple mail flagged messages are not showing up in the flagged folder.

    my apple mail flagged messages not showing up in the flagged folder ?

    All messages finally appeared in "Sent" in Mail.app. But it sure took some time.
    Guess there is a severe lag time between .Mac and Mail.app?

  • My TEXT messages are not coming in except for when im on wifi...this never happened before to me!  if i turn Imessage OFF on my phone and ipad it still doesnt come in! HELP

    im not getting my TEXT messages anymore until i get around Wifi and then they flow in....i have Imessage on on both iphone and ipad...i tried turning OFF Imessage and they still dont come in!

    If they are coming in when you are around wifi, are the bubbles blue or green? SMS messages (green) are cellular and wifi would have nothing to do with this. They won't be carried over wifi. If they are blue bubbles, then they are iMessages and are coming in when you get to wifi because you are finally able to receive data, since you say you have cellular data turned off.

Maybe you are looking for