HT4889 Is there a way to abort a transfer of data from an old MacBook Pro to a new one when you're using Wi-Fi?

Is there a way to abort a transfer of data from an old MacBook to a new MacBook Pro when you're using Wi-Fi?

If you are sure you want to to do it: command + option + esc, then and Force Quit.
ethernet is much faster than wifi.

Similar Messages

Is there any way to get all my stuff transfered from my old broken iphone to a new one

is there any way to get all my stuff transfered from my old broken iphone to a new one

Guess you have your answer. Maybe next time you'll read the User Guide and use the phone as recommended so this doesn't happen again.

Fastest way to transfer information from my old MacBook Pro to a new one?

What is fastest way to transfer data between MacBook pros? It takes forever on wi-if.

Sometimes the fastest way would be just to transfer only your files via a external hard drive via drag and drop methods into the same named accounts on the new machine. This is especially useful if you want to avoid corruption of the old machine and have a chance to clean house of older files.
By the time one fiddles around finding a Firewire cable and adpaters, a standard USB 3 external hard drive could be done already and be gotten at any local computer or office store.
Also Retina's have SSD's and any data on them is not scrubbable like hard drives can be. Scrubbing SSD's would involve the entire drive being filled and this would wear them out prematurely as they have limited writes to each sector.
If you want to use Migration or Setup Assistant, there is some element of risk involved because your copying the corruption over from the previous machine if it exists. If you know the previous software is fine on the older machine, then you can use Carbon Copy Cloner to clone the whole OS X boot parititon to the external USB drive, then hook this up to the new machine and run Migration/Setup Assistant against it, just like you would in Firewire Target Disk Mode if you don't want to wait to get a Thunderbolt to Firewire adpater from Apple.
If you already have the Thunderbolt to Firewire adapter and a cable/adpater to the old Mac, then that's the fastest way.

HT4889 Transferring files from my old Macbook Pro to the new one takes over 30 hours?!?!

How is that even possible? I am trensferring the files using a tunderbolt cable and the wifi on the source computer is switched off to avoid trying to transfer the files over wifi. At first I thought the estimation was inaccurate and hope that when I leave it overnight it will be done by the morning but it wasn't, nor the morning after. I can see there is progress but it is so tremendously slow, it absolutely strains my nerves goven the fact that I have porpietary software on my ild computer that I really nee dto use now, and I am afraid what will happen if I disconnect.
It's been saying "less than a minute left" for almost an hour now but nothing is happening. Can/should I try to restart?

Ah, I see, you are right. My old MacBook is from mid 2010, so it simply has a mini display port, I just assumed it is the same thing since the cable fit and the computers recognized each other.
I wish I knew that before I started, as there wasn't really anything I could do at this point but wait for two days only to get stuck on the last minute. The only "guiding" message was on my new computer advising me to connect via ethernet cable. Ironically it showed the message on my new MacBook Pro, which doesn't even have an ethernet port...

When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact?

My mac and I rely HEAVILY on the use of alias files and folders. The simple version of my question is: When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact? These are not symlinks or symbolic links, they're all alias files and folders.
Is there any software out there that might help me with a solution? Are there any tricks or tips you can give me to try?

Use either Setup Assistant at first start, or Migration Assistant on subsequent occasions and all will be transferred intact. Given your wording I presume you are Unix savvy and will appreciate the problems that duplicate userids would cause, so of you use MA for the migration, make sure the target Mac has no userid equal to that on the source and you will be fine.
SA does not have these issues since it runs before any user account is created, so it can simply copy over everything. But MA runs after the fact and only solves the issue partially by changing the UID in the user directory, leading to permission problems.

I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

Ya know what I'm on a brand new MBP just about 24 hours old and you know whats been working amazingly for me. I have a 27inch iMac as well and i've just connected it to my network and been dragging files and apps across the network onto my new MBP. Its really working fast and its flawless. You could always do that option, Just go into sharing options and turn them on for both Macs. Then just click and drag. Of course they have to both be on the same network for this to be possible.
Look at my network.
Shared is what your looking at. I click on there see all my computers files and then drag the ones i want form its folder to my MBP folders. Hope that helps if your looking for a very simple way on a wireless network.

Whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac

What's the easiest way to transfer data from an old external disk to a new one?

Hello!
My external hard drive (SimpleTech 250GB) is almost full so I bought a LaCie P'9230 3TB hard drive to take the place of the old one. What is the easiest way to transfer the data from the old one to the new one? Also, any tips on how to format the new drive will be appreciated since I haven't done this in a while.
Thank VERY much!!!
tenntooter

Hello rkaufmann87 and Linc,
Thank you both for your responses. It ended up that it was REALLY easy to set up and use the LaCie drive. The drive came with very simple instructions and a very easy to use setup assistant. Setup took about 2 minutes without ever leaving the assistant to get into Disk Utility, etc. Once the drive was setup I simply dragged the older external drive on top of the LaCie drive and the LaCie copied the data in about a minute.
After backing up the old drive I set Time Machine to use the new LaCie drive and selected the encryption option. It took the LaCie drive about an hour to totally back up my iMac's hard drive and to encrypt it as well.
VERY IMPRESSED with LaCie for sure!!! (As well as continuing to be VERY IMPRESSED with my MAC!!!)
Thanks again!
tenntooter

HT4889 I am using migration assistant from my old macbook pro to my new imac, but it seems to have stuck about 1/3 of the way through. Any suggestions??

Both are on the latest version of MacOS (made sure I had them completely up to date before starting).
Laptop and imac are connected via ethernet cable. Has been stuck for at least 2 hours showing "About 3 hours and 12 minutes remaining". Not sure what to do??

Disconnect and connect your Ethernet cable. If the migration doesn't continue, restart both Macs and start the transfer again. Wi-Fi and Ethernet are slow so I don't recommend you to use it unless it's the only option you have

Is there a way to auto-configure the optimal screen settings for a macbook pro running windows 7? When running Lion the screen looks 10x better.

Just like the title reads. 2011 MBP Quad Core 15". Used boot camp to instal Windows 7 Home premium but screen resolution is bad. Thank you

No. Reopen Boot Camp Assistant and click on the Continue button. You'll see in that screen a checkbox to download drivers. Check that box and uncheck the other boxes. Have a freshly formatted USB flash drive or hard drive connected. Must be partitioned MBR and formatted FAT32. You can format it while in Windows. Have it connected when you use Boot Camp Assistant. Once you click on the Continue button again BCA will attempt to download the drivers.
Once you have the drivers boot Windows. It should autorun the installer you downloaded after Windows gets itself settled in.

I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

Depends on what you had
If you had iPhoto version 9.5.1 then you can reinstall from the app store under purchases
If you had any version of iPhoto '11 then you can install for free from the App store
If you had any earlier version of iPhoto (iPhoto '09 version 8.x.x) or older then you need to purchase iPhoto '11 version 9.x.x from the app store
If you had iPhoto '08 (version 7.x.x) or older then you also need to download and run the iPhoto library upgraded prior to launching the new iPhoto
LN

Is there a way to see the size of my ICloud backup files, so I can determine which one I want to use?

Is there a way to see the size of my ICloud backup files, so I can determine which one I want to use?

Go to Settings>iCloud>Storage & Backup>Manage Storage. Your backups are listed at the top, along with their sizes. Note: this will only list your most current backup. You may have your previous two backups available too but you cannot access any size information about them.

Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

Thanks. Beforehand, I was double clicking on the multicam clip and forced to make a marker on either the Cam A or B. I realize now that I can do it in the Event Browser. THANK YOU.
Considering I may create >20 markers per clips for around 10 different interviews, I wish there was a way to bring the Event Brower to the bottom half of the FCPX windows, to resemble the screen orientation when I'm working in an actual project (one could do this in iMovie), and this way the markers could be listed to the left without having all the other event clips around it. Is that clear? Is that possible?

I have an older Ipod Touch, I bought a new one and the Itunes on my computer is too old to recognize my new Ipod Touch and cannot be updated. Is there a creditable software program I can use to get all my old music from my old iPod Touch to the new one?

I have an older iPod Touch, I bought a new one and the Itunes on my computer is too old to recognize my new iPod Touch and Itunes cannot be updated. Is there a creditable software program I can use to get all my old music from my old iPod Touch to the new one? It is my understanding that the music cannot be saved onto my new iTunes, b/c I did not have iCloud. I have over 2,000 songs I just cannot part with. PLEASE PLEASE PLEASE help some how!! THANKS!

I had the same problem with my iPad, i couldn't get the newer version of itunes because the computer was too old and my iPad couldnt sync with the old itunes. I got a PC from school a few months later so that solved the problem for me. Unfortunately i don't think there would be a program to put your music on your iPod, iTunes should be the only way to transfer files to Apple devices. What operating system are you running and what version of it is it?

I've just bought a new mac and I want to transfer the content from my old Macbook to my new. If I have iCloud enabled on both devices, is this simple, or is there a limit to what I can transfer? For example, can I upload word files to iCloud?

I've just bought a new mac and I want to transfer the content from my old Macbook to my new. If I have iCloud enabled on both devices, is this simple, or is there a limit to what I can transfer? For example, can I upload word files to iCloud?

iCloud is not the way to do this. You should use Migration Assistant - with this you can transfer your complete User folder from the old Mac including preferences and logins. You will need to connect the two with FireWire or USB depending on the models.
Ideally you should do this before you set up the new Mac - if you create a user account with the same name than the Migration will have to give the migrated user folder a different name. When you first switch on the new Mac it should ask you if you want to transfer your data, and give you instructions.

HT4889 Is there a way to abort a transfer of data from an old MacBook Pro to a new one when you're using Wi-Fi?

Similar Messages

Maybe you are looking for