HT4906 When I synched my phone to the iCloud, I lost my contact list and phone numbers.

When I synched my 3G phone to upgrade the operating system and to join i cloud, I lost my contact list and phone numbers
How can I get the list and phone numbers back???
allen8844

If they aren't in your contacts on icloud.com when you check from your computer, you would have to restore them from a backup source.

Similar Messages

HT201270 lost my contacts on my phone,,,how do i use the icloud to restore my contacts on my phone

lost my contacts on my phone... how do i use the icloud to restore my contacts on my phone

if they are still stored in iCloud, turn contacts off under settings>iCloud, then turn the back on and elect the merge option. if that doesn't work you may have to remove the account from the device, and sign back in

I imported the info from my phone to my wife's phone by mistake. She lost her contacts, texts, and photos. Is there any way to get that stuff back? Could it be stored on our Mac somewhere?

I imported info from my phone to my wife's phone by mistake. She lost her photos, texts, and contacts. Basically my phone is her phone now. Is there any way I can get her stuff back on her phone? We also have a Mac computer. Could that info be saved on it?

If there's no backup, then there is nothing to restore.
In iTunes, under Edit > Preferences > Backups it should list the name that was assigned to the device.

Contact Caller Name identification when incoming call, central contacts list and short numbers

Hi,
I have a New CUCM + CUC + CUP
I'd like know whas is the best way to do this:
I want to createa list of central contacts (for all my extensions), and assign to this contacts its telefhone number (9-12 digits) and a short number of 4 digits.
I want make a call to my contacts using this 4 digits (short number)
After I have saved this contact in the ContactList,, I whant that a internal user, using the contact list of the internal cisco phone can search and call the contact I have created, searching by name (or surname). I want that the user could make a call using short number or searching contact.
Finally, the most important, I need that when that external contact makes a call, the cisco phone ringing shows the name or surname of the contact (not the telephone number) I need to know who is calling (it it is in my contacts)
Thank you!
Carlos Moreno

You say you have CUPS, so that means you can only go as far as 8.x versions.
You can configure E164 to the DNs, and use TPs to use short dialing.
You would need to add the users and all the info to your directory, either manually, or in your LDAP if LDAP integrated.
The last bit cannot be done without a 3rd party, we don't have phone to name/contact resolution.

TA38622 how do you delete a contact name and phone number from this? i have deleted it from my regular contacts, but it remains in a text memory when i begin to type the beginning of a name

How do I delete a contact name and phone number from my texting memory? I have deleted this contact from my regular contact information; however when I text and begin to text a contact beginning with the 1st letter of the name I had deleted, it brings up the old, deleted contact information in my texting history only.

You would have to restore as new.

When i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

when i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

I got a new iphone 6. When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup. How do I get the most recent backup onto my new phone?

I got a new iphone 6. When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup. How do I get the most recent backup onto my new phone?

Hello, Anita.
Thank you for visiting Apple Support Communities.
I understand that you are wanting to restore your new iPhone 6 from an iPhone 5 backup. This sounds like the iOS version of your old iPhone 5 may be newer than what was installed on your iPhone 6. Try going through the steps in the article below.
iOS: Unable to restore from backup of a newer device
I would also check to see the backup dates in iTunes and if the backup is located on iCloud instead of iTunes.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
Cheers,
Jason H.

TS1702 i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.

When I try to manage my music in the usage my screen freezes when I begin to scroll through the music software is up to date and I have the iPhone 6 plus any suggestions?

When I try to manage my music in the usage my screen freezes when I begin to scroll through the music software is up to date and I have the iPhone 6 plus any suggestions?

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

HT204053 Apple offered to install iCloud, and I allowed it. Yet when I try to sign in to iCloud using my Apple ID email and pswrd--an ID that I've been using for YEARS--I'm given the message, "This Apple ID is valid but is not an iCloud account." What is

To repeat my question, Apple offered to install iCloud, and I allowed it. Yet when I try to sign in to iCloud using my Apple ID email and pswrd--an ID that I've been using for YEARS--I'm given the message, "This Apple ID is valid but is not an iCloud account." What is going on?
Everywhere I search on Apple's Support site says to sign in to iCloud using your "Apple ID," which I did. I've had my iTunes account for years (even migrated from the old AOL account system). It's the standard email+password that everyone is supposed to use.
My main question is how can I have a valid Apple ID and not an iCloud account--if the two are supposed to be linked?
Thank you for any help you can give me!
tlj

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb.But the output records is originally 4000 records. When copy to new excel it is showing 3.5 mb only. Does anyone knows the answer for this issue?

When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb. The records contained in excel file is 4000 records. When taking the excel records and copy to new excel file the excel file size is 3.5 mb only.Why does the oracle software generates 20mb file?
Does any one knows the answer please advice?

Hello,
This issue is because the Excel output from BI Publisher is MHTML (XML Publisher generates XHTML) not binary .xls.
MHTML and XHTML are more verbose formats than binary .xls.
It will be large because the current Excel output is just an HTML and not compressed like PDF. Please use the workaround (save it as .xls file). This is a known limitation of RTF layout templates.
BI Publisher Enterprise has a new feature True Excel Templates. The layouts generate binary Excel output.
Excel Output File Size Generated By BI Publisher is Very Large (Doc ID 760437.1)
Bogdan

My phone was stolen and I discontinued cell service to the phone through my provider. Before discontinuing service, I locked my phone from the icloud. Now that it is no longer being serviced by the service provider, will it remain locked?

My phone was stolen and I discontinued cell service to the phone through my provider. However, before discontinuing service, I locked my phone from the icloud. Now that it is no longer being serviced by the service provider, will the phone remain locked?

Thanks, James. Sadly, I had not upgraded to iOS 7 as I only had an iphone 4 and those I knew with the 4 who upgraded had major issues with battery life, so I decided not to upgrade. However, I know the phone was locked because the new "owner" called and hung up on me while calling the number I listed in the "This phone is stolen message" set by the cloud. Are you saying that my phone will remain locked if they don't know how to break into it? Or are you saying that it will no longer stay locked once I turned off service to the phone?

I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

Restore it using the computer you normally sync with.

I saved an Excel file yesterday afternoon, and when I opened it today, all the formatting was lost.

I saved an Excel file yesterday afternoon, and when I opened it today, all the formatting was lost.

See:
*[[/questions/894442]] OWA 2010/Firefox 8 and ASHX Attachments
*[[/questions/895024]]

When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not a

When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not allow me to select OK. Also Bridge keeps saying "Building Criteria" with the spinning wheel and nothing happens. I tried uninstalling and reinstalling to no avail. Please help:)

Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences.

HT4906 When I synched my phone to the iCloud, I lost my contact list and phone numbers.

Similar Messages

Maybe you are looking for