HT4946 i updated my iPhone4 to ios6. now i can't activate nor open it. please help!

Please help! I tried to update my iPhone 4 wit iOS 6. Now, I cannot activate nor open it. It says to contact Customer Care but all my Apple care plan are expired. is there a way for me to return to the iOS instead? Thank you.

You can try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
However, sometimes an iOS update breakes compatibility with car systems. I would also contact the car manufacturer.

Similar Messages

  • I have ipod touch and somebody tried many many times(22000000) to enter the password and now it is locked how i open it please help me ???

    I have ipod touch and somebody tried many many times(22000000) to enter the password and now it is locked how i open it please help me ???

    You'll need to connect it to the iTunes library you normally sync it with and restore it.  If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • I've accidentally closed my program sequence at the top. And now I can't get it back. Please help

    I've accidentally closed my program sequence at the top. And now I can't get it back. Please help. All my source, timeline, sequences are blank...

    Go to the Media Panel and double click on the sequence.

  • HT204053 After updating my iPad to IOS 7, I can't access my AppStore. Please help.

    After updating my iPad to IOS 7, I can't access my AppStore. Please help. Is it anything to do with ICloud?

    What version of OS X are you using and what version of iTunes? Are you getting any error messages?
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    ITunes: Syncing media content to your iOS devices
    http://support.apple.com/kb/ht1351
     Cheers, Tom

  • I had 900  songs on my computer which i saved to the icloud. My computer was given to my kids and now I can't find my music. Please help

    I had 900  songs on my computer which i saved to the icloud. My computer was given to my kids and now I can't find my music. Please help

    How did you save your music to iCloud?  Did you subscribe to iTunes Match?

  • Hi apple am new user to apple i just bought i phone 4s  and  i set up passowrd and forgot it how  and the iphone is not responding now how can i deal with this broblem please helpe

    hi apple am new user to apple i just bought i phone 4s  and  i set up passowrd and forgot it how  and the iphone is not responding now how can i deal with this broblem please helpe

    iPhone User Guide (For iOS 5.1 Software)

  • The latest update of my IPhone 3GS has failed, now i can't use the phone. Please help.

    The latest update of my IPhone 3GS has failed, now i can't use the phone. I have tried to restore but i get a message saying 'Iphone could not be restored. An unknown error occured(6). I am running the latest version of itunes (10.4) Please help.

    Place your iPhone in manual recovery mode or DFU mode.
    1. Connect your iPhone
    2. Open iTunes
    3. Hold down the home and power button for 8 seconds. After 8 sec, let go of the power but still hold down the home button until iTunes recognize your phone in recovery mode

  • My daughter went from an iPhone to android and now she can't get iPhone messages.   Please help

    When you go from and iPhone to and android what do you have to do to iPhone before shutting it off

    Bonlara wrote:
    Sorry I didn't finish my post.  ... now she can't receive texts from other iPhones.   We did everything to inactive iPhone but still problems
    See from the above link...
    If you no longer have your iOS device

  • Hi i am trying to install windows to my macbook through boot camp and i get this message Can't install the software because it is not currently available from the Software Update server.!!!what can i do???please help me!

    Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????

    You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
    Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/

  • HT4993 My new 4s ran the battery all way down, and now I can't get the phone restarted please help

    My new 4s had the battery run all the way down, how do I get restarted?

    "You have to change your router's IP address to be able to access it. It will not give you the internet."
    I'm not sure what that means Richard, but I did change the router's IP address from 192.168.1.1 to 192.168.5.1- isn't that what you meant in your first post. I know that isn't reflected in my screen capture that I took last night, but I did do that this morning after I read your post.
    "Log on to your router and change two settings.
    Change the setting in Setup from PPPoE to Automatic Configuration-DHCP and click on save.
    Click on Advance Routing and change the setting from Gateway to Router then click on save."
    I did this and still same results as far as I can tell. Can't get online through the router.
    "Click on MAC address clone under setup tab ... click enable & click clone ...click save settings ... Check the IPaddress under WAN page ....
    If getting IP in public range .... try going online ...."
    I tried this- at least to the part about checking the IP address under WAN. I assume you mean the WAN page in the modem setup- nothing looked any different after trying what you suggested, and I'm not really sure where I would be "getting IP in public range" or what that means.
    I'm about to give up and just buy a new router to see if I can get the same lack of results with a different one. My ISP maintains that everything is set up correctly on their end and really can't do anything more for me. The Modem works and is set up correctly and they can give tech support for a router.
    Here's what my basic setup looks like now:
    http://i490.photobucket.com/albums/rr270/SukarUDL/BasicSetup.png
    Here's what the advanced tab looks like now:
    http://i490.photobucket.com/albums/rr270/SukarUDL/AdvancedRouting.png
    Modem setup looks the same
    Message Edited by Writersbloc on 09-25-2008 07:05 PM

  • I forgot my backup password and now i can't access my backup so please help me what to do

    i forgot my  backup password so what i hAVE to do

    I have used the “iPhone Backup Password Unlocker” to reset my forgotten encrypted iPhone backup password Windows! It is unbelievable for me! Just 3 easy steps! Now, all my contact address, call logs, etc. are back!

  • I backed up my phone and now I can't delete Photo Albums. Please help

    Photos are occupying 8.0 GB, phone will not let me delete them. Please advise how I can create more space in my storage?

    It sounds like you may have done an iTunes sync. If so you will need to connect the phone to the computer and sync again but with different settings on the Photos page of iTunes. See the instructions below (more details in iTunes: Syncing photos - Apple Support)
    To delete synced photos and videos from your device
    In iTunes, click the Device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper-right corner first.)
    Click the Photos tab in the resulting window.
    Choose "Selected albums" and deselect the albums or collections you want to delete.
    Note: To delete all synced photos, deselect "Sync Photos from" and, when asked, click "Remove photos."
    Click Apply.

  • I have just updated my iPhone4s to ios6 but now my phone keeps freezing and my apps freeze and close why is this?

    I have just updated my iPhone4s to ios6 but now my phone keeps freezing and my apps freeze and close why is this

    try a reset hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • HT201210 I updated my iphone4 to ios6. My iphone can't be connected to itunes on my computer. How can I get it to work

    I updated my iphone4 to ios6 operating system. Now I'm trying to sync my phone to itunes on my computer and the message I get is "the iphone 'janice' cannot be connected. Please help

    You might want to try posting in your native language.  Then again, digging up a 6 month old posting rarely serves a useful purpose.

  • Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

    Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

    I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.

Maybe you are looking for

  • Need help to open audios attached in a PDF file

    Hello I just need help. I have ordered a reviewer online that has audios and texts in a pdf file. I was told to download the latest adobe reader on my computer. I have done the same thing on my ipad mini. I am not so technical with regards to these t

  • Java.util.zip.ZipException Error

    I created a jar file, and put in C:\tools C:\tools>java -jar myjar.jar is working fine However, if I try to run myjar.jar in other directories, then I have problems. I already set the classpath: SET CLASSPATH=.;%CLASSPATH%;C:\tools\myjar.jar; Here's

  • Direct Path Read

    Hi everyone, I am experiencing High Direct path reads and every time i run the query I see there is no decrease in physical reads. I have come across in the docs that this could be if the blocks are directly read into PGA instead of SGA, what will be

  • Remove Title Bar From Form, Visual C# Express

    I have been told to set the Border to 0 or "none". I was also told to set the ControlBox to False.  This only removed the minimize, maximize and exit icons. There is no Border setting on the Form Properties.  Is that in the Ultimate version? Otherwis

  • Quark files show as unix executable files.

    I have a strange issue. This is an all mac enviornment. The iMac's are running 10.4.11, and Quark express 6.0 One of the iMac's show the quark files as unix executable files. All of the other mac's can open the files without any issue. On the iMac th