HT5622 Hi, in Apple ID setting page I can see alternative email adress.actually it's not belongs to me . I want to delete that. Is it possible?

Hi, in Apple ID setting page I can see alternative email adress.actually it's not belongs to me . I want to delete that. Is it possible?

This is really a problem, and unfortunately you won't be able to do anything, if you cannot contact the previous owner. (See also: https://support.apple.com/kb/TS4515)

Similar Messages

Setting up the I Pad for the first time I am stuck on the wi fi page it can see the network my pc cant see the i pad

setting up the i pad for the first time i am stuck on the wi fi page it can see the network but my pc cant see it

Since you have a modem/router, you must continue to use the Beetel modem/router on your network.
The Time Capsule can connect to the Beetel modem/router using a wired Ethernet cable connection and produce a separate wireless network. You would NOT want the Beetel router and Time Capsule to both try to produce the same wireless network if they are located close together, since this will likely create interference problems that may prevent devices from connecting to either the Beetel orTime Capsule wireless network.
The exception to having the Beetel modem/router and Time Capsule produce the same wireless network would be if you can locate the Time Capsule at least a room or two away from the Beetel modem/router. An Ethernet cable can be run up to 300+ feet or about 100 meters with no signal loss, so you should be able to locate the Time Capsule anywhere you want.
Are you able to consider this option?
Another option.....if you cannot locate the Time Capsule in another room......would be to configure the Time Capsule to use the same wireless network name and password as the Beetel network and turn off the wireless on Bettel modem/router.
Important.....there is no guarantee that the printer will be able to connect to the Time Capsule wireless network, so you should expect to start over and set up the printer again.
Yet another option would be to turn off the wireless service on the Time Capsule and use the Beetel wireless to back up your computers to the Time Capsule, which will act as a wired hard drive for the network. If you select this option, the Time Capsule can be located close to the Beetel modem/router.

I just upgraded to 10.9. My exchange email won't load emails that are older than a few weeks old. How do I change this setting so I can see all my mail?

I just upgraded to 10.9. My exchange email won't load emails that are older than a few weeks old. How do I change this setting so I can see all my mail?

Plett81,
I'm having the exact same problem. It does not seem to be a settings issue but rather some sort of "problem" with mac mail. My Exchange provider was able to setup my mailbox on a test machine running Mavericks and everything pulled in fine, however I cannot duplicate on my upgraded system.
I was able to get rebuild my mailbox and get the older messages within my Exchange inbox, however none of my folders and old messages outside of the Inbox are downloading/synching.
**NOTE** I contacted Apple SUpport and they told me to call my email provider. I called my email provider which did as described above and they don't see a problem. SO as suspected it has something to do with the Mavericks update but I'm not sure Apple is willing to help. I might try contacting them one more time and see.

Reset iPhone asks for Apple-AD and then asks for password for other Apple-ID (my old, before I changed the email adress)

Reset iPhone asks for Apple-AD and then asks for password for other Apple-ID (my old, before I changed the email adress). Never had this problems before and I have reseted it once or twice since changing emailadress on the Apple-ID.

sckofusernames77 wrote:
but it doesn't ask you if you have one or say that you won't be able to log on without one.
Well, it does say on http://www.apple.com/icloud/setup/pc.html in step 1: "To enable iCloud on your Windows PC (Windows 7 or 8 required), first set up iCloud on your other devices, then install the iCloud Control Panel for Windows.
If you're trying to back up your device to iCloud, that doesn't have anything to do with your computer. You back up to iCloud over wifi. All you do is go to Settings>iCloud, sign in with your Apple ID to create your account, scroll down and tap Storage & Backup, then turn on iCloud Backup. You can then tap Back Up Now at the bottom to start the back up manually, or lock the screen and connect it to your charger and it will back up automatically every day.
Enabling the iCloud control panel on your PC only allows you to sync your iCloud data with your PC, not to back up your device to iCloud.

I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?

I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?

Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.

I recently changed my Apple ID to a new email address. My old one still is in my phone, and cannot be permanently deleted as it says that Find my iPhone is still on. I can't turn it off because I do not have the password to my old "deleted" Apple ID.

I recently changed my Apple ID to a new email address. My old one still is in my phone, and cannot be permanently deleted as it says that Find my iPhone is still on. I can't turn it off because I do not have the password to my old "deleted" Apple ID. If you can help, please do! Thank you very much!

I have the EXACT SAME PROBLEM and have been researching the past 2 hours!!!! Aaargh!

Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image...

Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image until they click on the thumbnail?

You can do this with "composition" widgets.

Up macbookair to hdtv using apple supplied cable. I can see my screensaver on tv but cant get netflix on the big screen...

i hookwed up macbookair to hdtv using apple supplied cable. I can see my screensaver on tv but cant get netflix on the big screen..

Is your wife's Mac using the same iTunes account for home-sharing?

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

I forget the secret answer of questions asked by account. I have also updated by account wiht alternative email (resque) but i am not getting any email from Apple. please help.

I forget the secret answer of questions asked by account.
I have also updated by account wiht alternative email (resque) but i am not getting any email from Apple for the restoreing my secret Ques Answer
please help.

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.

I can not longer send email from my .me email. in outlook 2010 on my PC. I can still recieve emails fine. I have not changed my settings at all. I have however tried all the settings i can find on the support pages. PLEASE HELP

I can still receive icloud ( ME email address) emails fine. I have not changed my settings at all. I have however tried all the settings I can find on the support pages. PLEASE HELP. Nothing has changed. This suddenly just started happening around a month ago. To frustrate me apple does not seem to have a support email or any method to contact them with this issue to do with their email product. I have spent ages going through the apple support sites and I keep getting asked for an apple product to mark it against. I have no apple product as I am using a PC but I am accessing and using their email product. Is there even a phone number I can call? Surely there is a support area for their Email server issues. Can anyone help? It is driving me mad and causing me major issues. My outlook is Outlook 2010 on a windows 8 PC. As I have said it worked fine then one day decided to stop sending emails.
Thanks for your help.

Hi - this problem is discussed here:
https://discussions.apple.com/thread/5375046?start=0&tstart=0

My document is blank when I open it in Pages, you can see it in page preview but I can't edit or anything, help?

Please can anyone help? I am opening a saved file which I can see in the template, but when I open it the page is blank. When I go to print I can see it there but I can't edit or anything!!!

I posted this on some other threads, but here you go. Try this, worked for me.
if I understand it right, is this what you had?
I could see the contents of Pages & Numbers files is previews, but they were blank when opened. Apple tech support--in an hour long call--managed to find a fix for my issue. I hope it works for you.
Concurrently to the seemingly blank files, my computer happened to be slowing down & stalling a lot, but while related to the problem, I don't know that this is a necessary symptom of anyone else's.
We deleted all the cache files in the ~/Libary/Caches folder, & emptied the trash. It said some files were in use, so we restarted and finished the trash disposal. Then we started up Pages & Numbers, and it was all good! My computer went back to its normal snappy responses too.
I am sure someone could possibly narrow down which cache files might be causing an issue. But give this a try.
By the way, I am running Pages 9, on Mountain Lion 10.8.4 (recently updated) on a MacBook Pro. Disk Utility found preferences and disk verify normally. Activity Monitor showed no excessive CPU use and there was no shortage of hard drive space. The problem was reproducable in safe mode. Deleting plists for iWork had no positive result. As for the slowdown, sometimes the computer would get stuck in spinning beach ball mode for a while, or freeze. The only think that worked was the cache purge.
Good luck!

Pages: How can I sort one column of words and not have it affect the other columns?

How can I sort one column of words and not have it affect the other columns? I have opened the inspector to the edit columns and rows under Table. It will sort the column, but then it changes the other colums as well. I know that if I use Numbers, it will work, but I want to know how to do the same thing in Pages.

Hi Peter,
Numbers sorts full rows on values in selected column(s). The technique for sorting a single column is essentially the same as Jerry is describing for Pages tables—separate the (data in the) column to be sorted, sort it, return it to the table.
In Numbers the actual column may be separated from the original table, sorted, then returned. In Pages, the data must be extracted, sorted, then pasted back in, overwriting the unsorted data (if it was left in the original table).
iWork tables follow a database model in which each row is a Record, and each column holds a Field within the records.
As evidenced by the current question (and several similar questions arising in the Numbers community) that model doesn't apply to the way some users, especially some who come in from the MS Excel world, use tables.
With Excels model—islands of data on a single large table, the ability to sort one or a selected few columns of data makes sense. One 'island' may comprise only cells AA21:AH50. Sorting that small 'table' should be possible without disturbing the rest of rows 21-30, which are probably part of one or more other 'data islands' in the sea that is a MS Excel spreadsheet.
In Numbers, each of those 'islands' would be a separate Table, and that Table would be sortable without disturbing other Tables in the document.
Regards,
Barry

YouCam video won't play - only audio. Used link from apps page. Can see screen capture.

Hi there,
We recorded a 1 minute video using Cyberlink Youcam (the one on the 8.1 apps page, as opposed to the one with shortcut on the main desktop page - Youcam5.) We can see te screenshot of the video, and hear the audio for entire duration of recording, but the video screen is only green. Help please!
Amber
This question was solved.
View Solution.

Hi @amberdag,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that when you tried to playback your recording from YouCam 5, you can hear the audio, but the screen remains green.
Have you done all your Windows updates?
Is you Direct X, Adobe flash player and or Direcrt X up to date?
Here is a link to How To Fix Green Screen Video Playback in YouTube in Windows 8.1 (from social.technet.microsoft.com) that should help you to overcome this issue.
Here is a YouTube video that may also aid with this difficulty.
YouTube Green Screen Playback Problem FIX
Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I can't see my apple tv listed but I can see all the other ones on the network (I live in a hotel). I have scrolled down the list of devices on my ipad but mine isn't there. Ihave checked the network settings and they're Ok. Any suggestions?i

I can' see my apple tv listed on airplay. iI have scrolled through the entire list and mine is not there. I can see other apple tv devices on the network but not mine. I'm using an ipad 2. I have checked the network settings between the devices and they're OK. Any thoughts?

Hi jl5653,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like the Apple TV is not listed in the selector window. I would recommend that you read this article, it may be able to help the issue.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Cheers,
Mario

HT5622 Hi, in Apple ID setting page I can see alternative email adress.actually it's not belongs to me . I want to delete that. Is it possible?

Similar Messages

Maybe you are looking for