HT5860 What about if when I start up my MacBook Pro it makes 3 short beeps 3 long beeps and 3 short beeps. Or is that the same as 3 long 3 short 3 long?

The screen does not turn on and makes 3 short beeps 3 long beeps and 3 short beeps again then turns itself off. Well I just tried to turn it on again and now there are no more beeps but instead just a black screen. The LED light in the front of the laptop is on and not blinking. Does anyone know what be wrong with my laptop?
Also this is a 2010 model I believe

Read this:
http://support.apple.com/kb/HT5860
Ciao.

Similar Messages

When I started up my macbook Pro after a boat trip (just lying in my bag the whole time) it started making weird sounds. Why does it do that and how do I stop it?

When I started up my macbook Pro after a boat trip (just lying in my bag the whole time) it started making weird sounds. Why does it do that and how do I stop it?

The 13" retina MBP has two fans, left and right near the hinge and about 2.5" each from the edges of the case.
My conjecture is that one of the fans may be failing. An appointment at an Apple store genius bar is the best option. The evaluation will be FREE and a fan replacement (if that is the problem) should not break the bank account.
You might run an Apple Hardware Test:
http://support.apple.com/kb/PH11342
This may confirm my suspicion or perhaps find a different problem. Note that an error free result should not be viewed as being definitive.
Ciao.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences Users and Groups Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?

Hi r,
Make sure you close iTunes before shutdown. And you're quite welcome.

Why would a picture of a globe pop up when I start up my macbook pro?

I started up my macbook pro, and instead of the Apple logo popping up while the computer loaded, a picture of a flashing globe had popped up. I ended up shutting the computer off and then turned it back on and it loaded up as normal. I was just curious if this was something i should be worried about..? i've only had my macbook for about 2 weeks, and it's my first time with a mac computer. Please help!

That is a sigfn that either the Online Apple hardware test is starting or that you are booting from the Online Recovery HD system. Both are from the Apple web servers.

When i turn on my MacBook Pro, it makes the chime sound, and I hear it running but the screen is black. Just downloaded new OS.....need help.

when I turn on my MacBook Pro, I hear the startup chime, and the fan running. The screen is black and there are no lights on the keyboard. I tried resetting PRAM, but still will not start. Running OS X Mavericks 10.9.1 and recently download new OS. Serial number is C0****W47. How do I bring my screen back?
<Peronal Information Edited by Host>

After a while I heared something about pressing the return key for english. But when I pressed the ruturn key, nothing happened.

When i start up my MacBook pro i only receive a white screen

I Can nog start up my pc

Mac OS X- Gray screen appears during startup
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

When I start up my Macbook Pro, I get a grey screen and a flashing folder icon. What does it mean and how do I fix it?

Help. I don't know what to do. I need this computer for college courses.

Hi PrinceCobra925,
Welcome to Apple Support Communities.
It sounds like there is an issue starting your Mac, it's booting up to a gray screen with a folder that has a flashing question mark on it. The article linked below provides a lot of great troubleshooting tips that will resolve most issues like the one you described.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
I hope this helps.
-Jason

I have a gmail account set up on my macbook pro. One mail I sent with photos continues to repeatedly downloaded in Recovery. At the same time my Gmail won't download new emails into Inbox when I press Get New Mail. Help

I have a gmail account set up on my mac. A few days ago I sent an email with photos in it and this email now is continuosly being recovered. In the meantime my inbox has stopped downloading new messages, even when i press Get New Mail. How can I stop the repeated recovery of the email and how can I get my inbox to download again?

OK, I persevered and used the Rebuild mailbox option on Mail, actually had to do it twice, but now when I boot up and Mail opens all the previously received iCloud messages I've read on iPhone/iPad are pushed through.
Back to normal...

When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?

When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

My macbook pro takes a long time to start up, my macbook pro takes a long time to start up

my macbook pro takes a long time to start up, my macbook pro takes a long time to start up

up to 10 mins

When syncing iPad to MacBook Pro itunes says "this computer is no longer authorized for apps that are installed on the ipad" . When I enter my id and password it tells me the computer is authorized.

when syncing iPad to MacBook Pro itunes says "this computer is no longer authorized for apps that are installed on the ipad" . When I enter my id and password it tells me the computer is authorized.

http://support.apple.com/kb/TS1389

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every time.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every day. Help?

Hi Gary...
I see you are running v10.4.11 and you have updated Safari but make certain all the system software is up to date by clicking your Apple menu / Software Update.
If everything is up to date, try resetting Safari from the menu bar.
Select the top 7 buttons, click Reset.
Restart your Mac. Launch Safari. Try several of the sites you mentioned.
has started quitting
If resetting didn't help, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

This morning when I turned my macbook pro on, an alarm sound came from my computer and a thin, short line of light was flashing next to the pulsing light that did not come on. The pulser light has not come on at all today.

This morning an alarm sound accompanied by a flashing thin light happened when I turned on my macbook pro. Now the pulser light is not coming on at all and there is a steady thin light to the left of the pulser that stays on when I close my laptop. Does anyone know what may have happened?

>an alarm sound accompanied by a flashing thin light<
That seems like a memory problem.
Try resetting SMC and PRAM:
iMac SMC and PRAM reset

What should I do to setup a new MacBook pro for first time when moving from a PC?

What should I do to setup a new MacBook pro for first time when moving from a PC?

you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
http://support.apple.com/kb/HT4796

HT5860 What about if when I start up my MacBook Pro it makes 3 short beeps 3 long beeps and 3 short beeps. Or is that the same as 3 long 3 short 3 long?

Similar Messages

Maybe you are looking for