HT5928 I0S 7 draft folder in email exhcange is gone...anyone else have an issue with this "upgrade".  Draft folder is essential for my work as I create on my laptop and need the draft available on my iPad when I travel...UGH!

I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"?  Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.

I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"?  Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.

Similar Messages

  • HT5295 Does anyone else have an issue with the way iTunes fails to properly sync a podcast downloaded to an iPhone or iPad when connected to iTunes later?

    When I download a podcast directly to my iPhone or iPad and listen to it I expect it to reflect that status when I come home. Instead the podcast downloads again in iTunes and then wonderful joy it changes the status to unplayed and I wind up having to figure out what I've listened to and what I haven't (I listen to a lot of 'em).

    I'm not having issues.  What have you done to troubleshoot?

  • Does anyone else have an issue with the iPad loosing wifi connectivity?

    My 6 month old 64 gig iPad keeps loosing WiFi connectivity.  This is a problem since I need it for work to test live video streams.  I keep having to back out and reconnect from the systems panel.  This happens when I shift posting even an inch while sitting down or moving from room to room at home.  I have strong connectivity both at home and at work.  There isn't an issue on any of my other devices and a co worker of mine has the same exact iPad, and he is having the exact same problem.  Is there a fix?

    Go to Settings>General>Reset then select "Reset Network Settings". the device will shut down and reboot. while that is rebooting, unplug the router, count to 10 plug it back in. wait for the network to appear in wifi accounts, and you're good as gold.
    but make sure you know your wifi password or you wont be able to access it. 

  • My autofill stopped working recently.  I looked under preferences and all the necessary boxes are checked.  When I start to fill out a form, the autofill box comes up, but when I click on it, it turns blue and nothing else happens.

    my autofill stopped working recently.  I looked under preferences and all the necessary boxes are checked.  When I start to fill out a form, the autofill box comes up, but when I click on it, it turns blue and nothing else happens.

    Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
    1. Press the down-arrow key. (Credit to ASC member iNeight.)
    2. Quit and relaunch Safari. Force quit if necessary.
    3. Click in the first field to be filled, and then select
    Edit ▹ AutoFill Form
    from the menu bar. You may have to reload the page in order to do this.
    4.  Select
    Contacts ▹ Preferences ▹ vCard
    and uncheck the box marked
    Enable private me card
    if it's checked.
    5. Select your card in Contacts. Then select
    Card ▹ Make This My Card
    from the menu bar.
    6. In Safari, select
    Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
    If the box was already checked, uncheck it and then check it again.
    7. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.
    8. Run Software Update and install any available updates.

  • Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source?  Now that I'm on iOS 7, I either charge or use... Not both.

    Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source?  Now that I'm on iOS 7, I either charge or use... Not both.

    No problems here.
    Edit...
    My IOS-7 is on an iPod Touch.

  • Need Mac download not Windows anyone else have that issue when ordering?

    Need Mac download not Windows anyone else have that issue when ordering?

    Yes! Yes! Yes!
    And you can't complain because this company does not provide anyone to answer these questions and it theft by stealth.
    My Mac order was switched to PC first time so I decided to buy again and this time it just won't download. I get a Jrun Servlett Error page instead.
    This company is shonky
    [email protected]

  • My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together

    My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together

    You have a hardware problem and you should take it into a apple store to be looked at and fixed.

  • Anyone else have a problem with the charging plug catching on the aluminum backplate?

    Relatively new Ipad - after charging the unit, disconnected the charging plug and it caught on the backplate.  Anyone else have this problem?

    This problem arose today.  When I removed the plug, the plug pulled on the Ipad2, specifically the thin aluminum strip between the plug's receptical and the Ipad2's front.  No functional damage...the unit still works and charges, but now that thin aluminum strip is displaced.  The plug itself appears to be the culprit.  Looking at the plug that connects to the Ipad2 (the side with the graphic), there are 2 areas which I presume provides tension when the plug is inserted into the unit.  One of those areas is displaced, and became caught with the thin aluminum strip during the plug's removal.  

  • HT202157 Does anyone else have a problem with the latest Apple TV update?  My Apple TV no longer can load movies from my iTunes library, including ones I've already watched or were watching.  Can I roll back this update, and if so, how?

    After updating my Apple TV, it will no longer load movies from my iTunes library.  Music works, but no movies.  I've turned this puppy every which way but loose, but no joy.  Is there a way to roll back an update?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Is anyone else have data overages with their new phone, even with the LTE being shut off

    I have upgraded to the iphone 5s about 3-4 months ago, and my data usuage has gone up and over within 2 weeks of the billing cycle. with my old iphone it never went over the 4g limit, and that was with nike + and pandora running apps loaded [im a runner and have done this with 3 half marathons in one month plus additional miles]. i am now afraid to even use pandora for an hour on my phone. I have turned off as many things as possible to lighten up the data usage, ie LTE is off, and so is a lot of location servces and background app refresh. i still cant figure out why im reaching my max data usuage so quickly when i am using it 80% less than i use to.
    is anyone else having similar issues and has anyone found a solution to this?
    i have also done a factory reset on my iphone to see if it helps at all - since, that is apples answer to everything.
    Message was edited by: swongbomb

    I've seen this, as well, on an iPhone 4s.  Eventually the high-data-usage went away, seemingly on it's own (and after calling AT&T a couple of times to get the overage removed from my bill).
    Having said that, one thing to check is to turn "Documents & Data" off...  Settings>iCloud>Documents & Data.  I'm thinking this can push and pull a lot of data to/from iCloud very quickly.  Photos under iCloud might do the same...
    Hope this helps...
    Bob

  • HT4113 anyone else have a problem with the iphone 4s locking and not able to unlock even though you keep entering the only code that you have used?

    Anyone else having a problem with the iphone4s locking and not letting you in even though you keep using the only code you have entered from the begginning?

    No. You are the first person out of 900 million users to have this problem.

  • IPad 2 music does not play and high resolution pictures get corrupted when syncing through iTunes on 64 bit Win 7.  Anyone else have a problem with iTunes corrupting music and pictures from 64bit machine?

    Works from a 32 bit XP machine.  Does not work from a 64bit Win 7 machine.  It's 64 bit that seems to be the issue; the music won't start playing, and for pictures, it's when they're more than 768x1024 resolution that they appear very low resolution and/or corrupt.  None of the normal tricks work (different user account; different USB port; different USB hub controller) and the problem is replicable.  The music and JPEG and PNGs, however, are fine if transferred via a Windows network to a 32 bit machine ie it's not the music/image files.

    Dear Katrina, the problem has finally been solved, with the help of a computer-savvy friend of mine who came round this afternoon. As a courtesy, and to thank you for all your help in this matter, I want to share the solution with you.
    A piece of the puzzle was missing, as you said, and it lay in the tenth line of the XML document I relayed to you....
    <key>Music Folder</key><string>file://localhost/C:/Users/Simon/Music/iTunes/iTunes%20Media/</string>
    My friend spotted that the command string contained a sub-folder of the iTunes folder called "iTunes Media". iTunes was expecting to find all my music there, but that folder didn't exist.
    So I created a new folder called "iTunes Media", and moved all my musical content into it, leaving all the command files in the original iTunes folder.
    Then I moved the "iTunes Media" folder into the "iTunes" folder, so that it was a sub-folder of the latter.
    Then I re-opened iTunes and - joy of joys! - everything works once again. I am re-united with all of my music, and without having to make over 14,000 manual location exercises. I can't tell you how exciting that is.
    The mystery is solved, and what had me so puzzled seems obvious now. Thanks again for your help. Without you I might never have got to this point.

  • We have enterprise License through which a provisional profile was created to generate .ipa and install the organisation application to employees ipads. Its getting expire tomorrow (7th Feb'14). Do this expiration will stop the application to launch?

    We have enterprise License through which a provisional profile was created to generate .ipa and install that .ipa to employees ipads. Provisional Profile getting expire tomorrow (7th Feb'14).
    1. Do this expiration will stop the already installed application in employee ipads to run?
    2. Also if i create some new .ipa today, can that .ipa be installed some other day or any time even after expiration of Provisional Profile?
    Please help, I need the answers of above two questions as renewal of my Enterprise license and creating a new provisonal profile going to take some time in my organisation and application is must for all employees.

    Guys please reply...

  • I have an issue with Add to iTunes folder incorporating mp3s in iTunes Media folder, but not into my iTunes library.

    I am using iTunes 10.5 on Windows 7 (64bit).  This has only started happening since the 10.5 update.  When I add mp3s to "Add to iTunes" folder, the mp3s will be added to a folder within the iTunes Media\Music\ directory, but the song will not show up in my iTunes library.  If I open the mp3 from its location in the directory, it will open in iTunes and be included in the Library go forward.   This issue is not consistent, it has happened the first time I tried to add an mp3, and not the second that I tried to add the exact same file.  Oh also, I have always had the option selected to allow iTunes to keep the media folder organized.
    For the time being I have to keep a list of everything I am adding and verify whether it shows up in the library.  If it doesn't I have to run a search to see what exact directory path iTunes put it in, go there and open the file - frustrating and time consuming.  Even more frustrating to me however is that I really don;t know if I have recovered all the added mp3s from before I recognized the problem.
    Any ideas?  I was wondering if there maybe was a way to have iTunes refresh its library from the folder? 

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

  • Anyone else having these issues with ipad

    Hi I have an ipad air which I now own for a month and recently safari keeps crashing almost all the time.
    I've also starting to notice this second click noise on my home button on my ipad air
    For example I put my finger on the button and I can hear a noise as if I'm pushing it but I'm not
    I don't know if it's become loose or something is wrong with it ?
    I hope that made sense
    Can anyone help me out here?
    Btw I barley use the home button I mostly use the ipad gestures to get in and out of an app but when I do use it it's kinda annoying .... Is it an issue with my ipad?
    I can't go to an apple store it's to far

    No, not the tabs "x", but for example, just now I tried to respond to your post by pressing the REPLY link on my ipad and it doesn't work. It also happens on EBAY when you click on tracking numbers and the pop-up window has a close button that will not work. Also on  EBAY if you make an offer, a window comes up to review your offer and submit. the submit button does not work. If you hold on one of these link buttons you get a notice to open and the info says javascript. I think ios 8 has issues with JavaScript.

Maybe you are looking for

  • Moving many but not all iPhoto photos between users

    My wife and I share an iMac with separate user accounts. We'd like to move lots of photos from iPhoto in one user account to another. But after we exported original images and video from one account to a shared drive, about a third of the exported im

  • Make external hard drive read/write

    Not quite sure if there is in the right section but oh well. Here's the story: SeaGate FreeAgent GoFlex Drive (1.5TB) (THE FOLLOWING INFO WAS TAKEN FROM ITS APPLICATION: ("SEAGATE DRIVE SETTINGS") Drive Info Model: FA GoFlex Desk Firmware: 0D19 Volum

  • Need to reduce `target-player` to support users with older Flash versions?

    Right now we are currently compiling ZeroClipboard using the Flex 4.6 SDK, which has a minimum (and default) "target player" version of 11.1.  I am uncertain if this is preventing users with Flash 10.x from utilizing ZeroClipboard but the documentati

  • Problems with import utility.

    Hello friends, I'm having very basic problems during a import process, I have to import a database from a .dmp file exported from someone else's system to my system. I don´t know the Oracle version that export was generated, but my Oracle version is

  • Function calls in BSP

    Hi guys, Can I call a function module in a BSP application? Everytime when I call a function module,  I get the error message :'The page cannot be displayed'. Could anyone help me on this? Thanks. Regards, Conrad