HTML and CSS Best Practices for Eloqua?

Hello Topliners Community,
My name is Ben and I am a Web Designer. I am currently looking for any guidance on HTML and CSS best practices when working with Eloqua. I am interested in the best practices for e-mail and landing pages.
Thank you,
Ben

Personally I like to upload my custom created html/css into Eloqua instead of using the WYSIWYG.
But if you must then right clicking on text boxes and click edit source is the way to go.
There was a good discussion on editing your forms with CSS:
Energize Your Eloqua10 Forms with CSS
created by Ryan Wheler on Nov 2, 2012 8:44 AM, last modified by Greg Stotler on Sep 19, 2013 2:00 PM
Version 2
CSS can be used to heavily customize the layout of forms in Eloqua10. In this article we will provide sample cover some common formatting use cases on Eloqua10 Landing Pages. Further details about uses of CSS in Eloqua10 form templates can be found here: EE12 - Do It - Eloqua - Energize E10 Forms
Eloqua10 Forms HTML Structure
Below is an outline of the structure of the HTML generated by Eloqua when a form is added to a landing page. By targeting the HTML classes highlighted below, we can control the layout of any form on your landing page.
For the rest of page: http://topliners.eloqua.com/docs/DOC-3015

Similar Messages

What is the guideline and/or best practice for EMC setup on ASM?

We are going to use EMC CX4-480 for ASM storage on RAC. What is the guideline and best practice for EMC setup on ASM?
Thanks for the advice!

Probably a poor choice of words. Sorry.
So basically, I have gotten further, but I just noticed related problem.
I'm using the WebServices(WS) 1.0. I insert an account, then, on a separate WS call, I insert my contacts for the account. I include the AccountID, and a user defined key from the Account when creating the Contact.
When I look at my Contact on the CRMOD web page, it shows the appropriate links back to the Account. But when I look at my Account on the CRMOD web page, it shows no Contacts.
So when I say workflow or Best Practice, I was hoping for guidance on how to properly write my code to accomplish all of the necessary steps. As in this is how you insert an account with a contact(s) and it updates the appropriate IDs so that it shows up properly on the CRMOD web pages.
Based on the above, it looks like I need to, as the next step, take the ContactID and update the Account with it so that their is a bi-directional link.
I'm thinking there is a better way in doing this.
Here is my psuedocode:
AccountInsert()
AccountID = NewAcctRec
ContactInsert(NewAcctRec)
ContactID = NewContRec
AccountUpdate(NewContRec)
Thanks,

Export and Deployment - Best Practices for RAR and CUP

Hi Experts,
I wanted to know what in your opinon is best practice for deployment for GRC for a 3 system landscape.
We have a development landscape which connacts to all our environments - Dev-QA-Prod.
Is it recommended to have just the production client connected to the prodiction boxes only and use Dev/ QA for other environments or is it a good idea to have Prod and QA in sync?
In my opinion it looks like a good idea to have the same QA and PROD as it would make export easier.. Maybe I am worng..
What according to you all is a good recommended practice here?
Thanks,
Chinmaya

Hi Chinmaya,
depends how many clusters you have in your landscape
if it is something like 5 DEV box to connect 5 QAS boxes, so on
then best practice will be to have separate DEV - QAS - PRD boxes for GRC if money (h/w ) is no constraint for organization
rather than later asking SAP for deletion scripts for deleting sandbox or dev connectors,
best to have separate boxes for each
also for future whenever you do rule changes in RAR and config changes in CUP, best to test in QAS first, as CUP will become very critical for your organization, post go-live
and good part will be that management report will reflect true data for PRD only
regards,
Surpreet

Configuring AD Sites and Services best practice for multiple office site ?

Hi People,
Can anyone here please suggest me or share the link of what is the best practice in configuring the AD Sites and Service for single AD domain with multiple office sites ?
I'd like to know more about the number and the direction of the connection between Domain Controllers in one site to the Data Center and vice versa.
Thanks.
/* Server Support Specialist */

Hi People,
Can anyone here please suggest me or share the link of what is the best practice in configuring the AD Sites and Service for single AD domain with multiple office sites ?
This series can be useful:
Active Directory Structure Guidelines – Part 1
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Table Onwers and Users Best Practice for Data Marts

2 Questions:
(1)We are developing multiple data marts that share the same Instance. We want to deny access to the users when tables are being updated. We have one generic user (BI_USER) with read access through one of the popular BI Tools. The current (first) data mart we denied access by revoking the privilege to the BI_USER, however going forward with other data marts the tables will get updated on a different schedule and we do not want to deny access to all the data marts. What is the best approach?
(2) What is the best Methodology for table ownership of tables in different data marts that share tables across marts? Can we create one generic ETL_USER to update tables with different owners?
Thanx,
Jim Masterson

If you have to go with generic logins, I would at least have separate generic logins for each data mart.
Ideally, data loads should be transactional (or nearly transactional), so you don't have to revoke access ever. One of the easier tricks to accomplish this is to load data into a shadow table and then rename the existing table and the shadow table. If you can move the data from the shadow table to the real table in a single transaction, though, that's even better from an availability standpoint.
If you do have to revoke table access, you would generally want to revoke SELECT access to the particular object from a role while the object is being modified. If this role is then assigned to all the Oracle user accounts, everyone will be prevented from viewing the table. Of course, in this scenario, you would have to teach your users that "table not found" means that the table is being refreshed, which is why the zero downtime approach makes sense.
You can have generic users that have UPDATE access on a large variety of tables. I would suggest, though, that you have individual user logins to the database and use roles to grant whatever ad-hoc privileges users need. I would then create one account per data mart, with perhaps one additional account for the truely generic tables, that own each data mart's objects. Those users would then grant different roles different database privileges, and you would then grant those different roles to different users. That way, Sue in accounting can have SELECT access to portions of one data mart and UPDATE access to another data mart without granting her every privilege under the sun. My hunch is that most users should not be logging in to, let alone modifying, all the data marts, so their privileges should reflect that.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

SX20 and SX10 best practices for small conference rooms using built in Display Speakers

Hi,
Im planning to deploy some small meeting rooms using SX10 and SX20 codecs, I was wondering if someone could give me some key points to consider:
1. Display recommendation, nice built in speakers, low delay (goog performance with codec echo canceller) I wish to use a 60 - 70 inch Led TV (not yet defined which brand and model) I would like to receive some feedback about nice performance displays with nice audio and echo cancellation performance based on your experience.
2. What would be the drawbacks of using SX10 and SX20 in larger meeting rooms maybe 10 or 12 people?
3. When to use external microphone? or when is recommended to use only internal microphone?
Thanks in advance for your help.
Best Regards, have a nice day!

Pretty well any modern display should work well - different people are going to have different ideas about whether the speakers are any good or not, so you'll have to listen to a few yourself and make up your mid what you think is "better". The echo cancellation can be tweaked manually on the codec to suit the display if required (rather than leaving it on the "auto" setting which, in our installations, has caused more troubles than it's worth).
The main drawback of using the SX10, or the cheaper of the range of the SX20s, is the camera and the amount of zoom. In a larger room, you're not going to get a good close up view with a 2.5x camera. I'd suggest for a bigger room, you look at the 12x cameras.
As a general rule - use additional microphone(s) when you can't get someone within a 3m radius one of the other microphones. So in a larger room, you may need many.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Best Practices for Using Photoshop (and Computing in General)

I've been seeing some threads that lead me to realize that not everyone knows the best practices for doing Photoshop on a computer, and in doing conscientious computing in general. I thought it might be a good idea for those of us with some exprience to contribute and discuss best practices for making the Photoshop and computing experience more reliable and enjoyable.
It'd be great if everyone would contribute their ideas, and especially their personal experience.
Here are some of my thoughts on data integrity (this shouldn't be the only subject of this thread):
Consider paying more for good hardware. Computers have almost become commodities, and price shopping abounds, but there are some areas where spending a few dollars more can be beneficial. For example, the difference in price between a top-of-the-line high performance enterprise class hard drive and the cheapest model around with, say, a 1 TB capacity is less than a hundred bucks! Disk drives do fail! They're not all created equal. What would it cost you in aggravation and time to lose your data? Imagine it happening at the worst possible time, because that's exactly when failures occur.
Use an Uninterruptable Power Supply (UPS). Unexpected power outages are TERRIBLE for both computer software and hardware. Lost files and burned out hardware are a possibility. A UPS that will power the computer and monitor can be found at the local high tech store and doesn't cost much. The modern ones will even communicate with the computer via USB to perform an orderly shutdown if the power failure goes on too long for the batteries to keep going. Again, how much is it worth to you to have a computer outage and loss of data?
Work locally, copy files elsewhere. Photoshop likes to be run on files on the local hard drive(s). If you are working in an environment where you have networking, rather than opening a file right off the network, then saving it back there, consider copying the file to your local hard drive then working on it there. This way an unexpected network outage or error won't cause you to lose work.
Never save over your original files. You may have a library of original images you have captured with your camera or created. Sometimes these are in formats that can be re-saved. If you're going to work on one of those files (e.g., to prepare it for some use, such as printing), and it's a file type that can be overwritten (e.g., JPEG), as soon as you open the file save the document in another location, e.g., in Photoshop .psd format.
Save your master files in several places. While you are working in Photoshop, especially if you've done a lot of work on one document, remember to save your work regularly, and you may want to save it in several different places (or copy the file after you have saved it to a backup folder, or save it in a version management system). Things can go wrong and it's nice to be able to go back to a prior saved version without losing too much work.
Make Backups. Back up your computer files, including your Photoshop work, ideally to external media. Windows now ships with a quite good backup system, and external USB drives with surprisingly high capacity (e.g., Western Digital MyBook) are very inexpensive. The external drives aren't that fast, but a backup you've set up to run late at night can finish by morning, and if/when you have a failure or loss of data. And if you're really concerned with backup integrity, you can unplug an external drive and take it to another location.
This stuff is kind of "motherhood and apple pie" but it's worth getting the word out I think.
Your ideas?
-Noel

APC Back-UPS XS 1300. $169.99 at Best Buy.
Our power outages here are usually only a few seconds; this should give my server about 20 or 25 minutes run-time.
I'm setting up the PowerChute software now to shut down the computer when 5 minutes of power is left. The load with the monitor sleeping is 171 watts.
This has surge protection and other nice features as well.
-Noel

Best Practice for IKE keys

Folks,
I am configuring my first site-to-site vpn using IPsec and IKE; however, I wanted to know if I should watch out for anything and the best practices for IKE.
I have generated a phrase that is 30 characters long, but should I include “special characters” in my IKE key?

Rather than the key length and 'strength' I'd focus on keeping a copy documented / stored securely offline somewhere. Process and documentation are at least as important as the technology.
99% of your protection comes from using a VPN at all as opposed to the characters used in your PSK.
If it's an option (e.g ASA 8.4 at both ends) I'd recommend using IKEv2.

I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. How do I resolve this issue?

I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. I did not have this issue in the older version. I use an iMAC running OS10.6.8. How do I resolve this issue?

Starting with this, you have errors in your CSS code.
body {
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 0px;
color: 151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: EFF5F8;
body {
margin:0;
color: #151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: #EFF5F8;
font-size: 100%;
Related links:
Windows Chrome, why do my fonts look so bad? - Lee Green
css3 - Bad font rendering Chrome - Stack Overflow
Nancy O.

Best Practice For Referencing JPEG Path Using Servlets To Prepare HTML IMG

I am migrating a legacy app from Tomcat 5 to Weblogic 11g (10.3). In the legacy app, servlets write HTML that uses relative paths for <IMG src="../images/img.jpeg"> and <script src="../javascript/js.js">. The app is deployed as an exploded archive. Unfortunately, none of the images or script are being loaded. I've tried using http://serverIP:portNum/contextName/images/img.jpeg"> but it doesn't work. I've also checked to get the name of the context in the servlet and it's the root context. Could it have something to do with me having to append .war onto the application when I deploy it? Would it help if I deployed it as a war inside an ear? Basically, I want some best practices for doing this on Weblogic 11g. There are a lot of images and javascript and I'm really hoping they don't have to be inserted using ClassLoader.getResourceAsStream()... thank you.

Best Practice:
1. Move Static files like images, css, java scripts to a web server infrastructure if available.
2. If this is not your case, then please send your directory information how you have packaged your EAR. I can advice :)

Java Swing/AWT and FX is so old school! Give me HTML and CSS for GUI!

Dear Java,
I am a seasoned programmer and I feel it's time JAVA implements a GUI system where it uses HTML and CSS for the GUI. For the love of god just look at the interfaces you can make using HTML and CSS alone. I am a big fan of Java Swing and the recent GUI designer for FX is quite cool. But they are just not as simple as HTML and CSS. And JavaFX has some interesting requirements for the graphics.
I know it is possible to use JavaFX and implement the WebView/WebDriver and make it load a HTML page, etc... but why go through all the trouble?
Just imagine... if you make Java where it has powerful back-end to do what it does best and the HTML/CSS powered GUI on the front-end. It will make the lives of many developers much much easier.
I am not sure whether a Swing designed GUI will be faster than a HTML designed GUI... but if you look at a traditional browser and how fast it renders HTML/CSS, I am sure if Java had a native Form where it uses HTML and CSS to render the GUI, Java will make the dreams of many programmers a reality.
Make it happen!!!!

Check this i solve problem just now using this
https://wiki.archlinux.org/index.php/Ja … ow_Manager

Best practices for handling elements and symbols (including preloading)

I am trying to learn Edge Animate and I have not seen enough animations to know how this is typically handled and I searched the forum and have not found an answer either.
If you have many different elements and symbols for a project, what is the best practice for having them appear, disappear, etc. on the timeline? I ask this question not only from a performance based perspective, but also keeping in mind the idea of preloading. This is a 2 part question:
Part 1: Using elements and symbols later in the timeline:
Since artwork is always imported directly to the stage in an "always on" status, should we place a visibility OFF on every item until we need it?
or should they be opacity 0 until I need them?
or should they be set to visibility hidden until I need them?
Which of these is the best option if you don't want the element / symbol visible until later in the timeline? Does it matter?
Part 2: Impact on page loading
Does the above question have any impact upon page loading speed
or is this something handled in preloading?
or do you need to make a special preloader?
Thanks for the help.

Hi, escargo-
Good questions!
Part 1: Using elements and symbols later in the timeline:
Since artwork is always imported directly to the stage in an "always on" status, should we place a visibility OFF on every item until we need it?
or should they be opacity 0 until I need them?
or should they be set to visibility hidden until I need them?
Which of these is the best option if you don't want the element / symbol visible until later in the timeline? Does it matter?
I would recommend that you set your visibility to "off" instead of simply changing the opacity. The reason I suggest this is that when your visibility is set to off, your object's hit points also disappear. If you have any type of interactivity, having the object still visible but with 0 opacity will interfere with anything you have underneath it in the display order.
Part 2: Impact on page loading
Does the above question have any impact upon page loading speed
or is this something handled in preloading?
or do you need to make a special preloader?
Thanks for the help.
No, none of this has any impact on page load. As you already noticed, all of the assets of your project will load before it displays. If you want only part of your composition to load, you may want to do what we call a multi-composition project. There's a sample of that in the Edge Animate API in the Advanced section, and plenty of posts in the forums (and one in the team's blog) explaining how to do that.
http://www.adobe.com/devnet-docs/edgeanimate/api/current/index.html
https://blogs.adobe.com/edge/
Hope that helps!
-Elaine

Can anyone recommend tips and best practices for FrameMaker-to-RoboHelp migration ?

Hi. I'm planning a migration from FM (unstructured) to RH. I'd appreciate any tips and best practices for the migration process. (Note that at the moment I plan to import the FM documents into, not link to them from, RH.)
For example, my current FM files are presently not optimally "chunked", so that autoconverting FM file sections (based on, say, Header 1 paragraph layout) won't always result in an optimal topic set. I'm thinking of going through the FM docs and inserting dummy paragraphs with a tag somethike like "topic_break", placed in more appropriate locations that the existing headers. Then, during import to RH, I'd use the topic_break paragraph to demark the topics. Is this a good technique? Beyond paragraph-based import delineation, do you know of any guidelines for redrafting FM chapter file content into RH topics?
Also, are there any considerations/gotchas in the areas of text review workflow, multiple authoring, etc. after the migration? (I've not managed an ongoing RH doc project before, so any advice would be greatly appreciated.
Thanks in advance!
-Kurt
BTW, the main reason for the migration: Info is presently scattered in various (and way to many) PDF files. There's no global index. I'd like to make a RoboHelp HTML interface (probably WebHelp layout) so it can be a one-stop documentation shop for users.

Jeff
Fm may produce better output for your requirements but for many what Rh produces works just fine. My recent finding re Word converting images to JPG before import will mean a better experience for many.
Once Rh is set up, and it's not difficult, for many its printed documents will do the job. I would say try it and then judge.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Best Practice for Use of ABAP in Customizing SRM and/or CRM

I was wondering if there is a document that defines best practices for the use of ABAP with the installation and customization of SRM and/or CRM. Such as amount of ABAP coding typically required, and best practices around the use of ABAP for customization and configuration.
Thanks.

Hi, Johnson
Sorry, Please don't mind, you are not at right place to ask the Question like this
Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Thanks and Regards,
Faisal

Best Practice for External Libraries Shared Libraries and Web Dynrpo

Two blogs have been written on sharing libraries with Web Dynpro DC, but I would
like to know the best practice for doing this.
External libraries seem to work great at compile time, but when deploying there is often an error related to the external library not being a deployed component.
Is there a workaround for this besides creating a shared J2EE library which I have been able to get working? I am not interested in something that works, but really
what are the best practice for this. What is the best way to limit the number of jars that need to be kept in a shared library/ext library. When is sharing ref service/etc a valid approach vs. hunting down the jars in the portal libraries etc and storing in an external library.

Security is mainly about mitigation rather than 100% secure, "We have unknown unknowns". The component needs to talk to SQL Server. You could continue to use http to talk to SQL Server, perhaps even get SOAP Transactions working but personally
I'd have more worries about using such a 'less trodden' path since that is exactly the areas where more security problems are discovered. I don't know about your specific design issues so there might be even more ways to mitigate the risk but in general you're
using a DMZ as a decent way to mitigate risk. I would recommend asking your security team what they'd deem acceptable.
http://pauliom.wordpress.com

HTML and CSS Best Practices for Eloqua?

Similar Messages

Maybe you are looking for