HTML DB not data found

I am developing a simple application with HTML DB.
On one of my forms , I started entering a data then i stopped and changed tab when i came back i got the below message:
Error Unable to fetch row.
OK
ORA-01403: no data found
I know there is data. There a report on the same page based on the table.

I get this sometimes too. There is a bug somewhere in HTMLDB but I can't track down exactly what it is. Can you try removing all order by choices in the report attributes and see if this allows the report to run, then put the order by choices back one at a time.
Steve

Similar Messages

False message: The document name you requested (/selector_test.html) could not be found on this server. However, we found documents with names similar to the one you requested.

When I specify http://www.celticmanner.com/selector_test.html to Firefox 6.01, I get the false message:
Multiple Choices
The document name you requested (/selector_test.html) could not be found on this server. However, we found documents with names similar to the one you requested.
Available documents:
/selector_test.txt (common basename)
The file http://www.celticmanner.com/selector_test.html IS PRESENT on the host.
The file http://www.celticmanner.com/selector_test.txt IS NOT. (It had been earlier.)
I do not find the text "selector_test.txt" anywhere on my partition C! Where does Firefox retain a pointer to this file that no longer exists? And why?
NB: The text "could not be found on this server" is sloppy. That message is not issued from a servcer, but from the instance of Firefox on my computer. The message should read "could not be found on the specified server".
B. Somers

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

"Not data found' for an application after installing Yosemite

Since I installed Yosemite on my MacBook Pro, when I try to open an application (Y), i am asked to refresh its content and then, a window pops up and says : Your data cannot be found at : users/me/library/Y... the software will now try to start using the default data file location.
And I cannot open the application..
Can you tell me what to do ?
I have tried to disentail/delete/erase the app and then to reinstall it but it always the same.
Thanks

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Can not view/export a report which has 2 group by field when no data found

Recently I developed a report, which contains 2 group by fields. it runs successfully when the report displays some data.
but when there is no data, i cann't view/export this report.
It shows nothing by html format and shows "this file cannot be opened because it has no pages" message by pdf format.
even there is no records for this report, i still want to see the template file and show some basic information.
please help me.
Daniel

I've found that, just like I used to do in Oracle Reports, if you put in a COUNT column to count your returning rows, you can put 'No Data Found' when there's no data. That way, your report will return and not error out.
For .pdfs, this is the code I use; COUNT with code of <?if:count(field_name)=0?>.
In the .rtf..
COUNT
No Data Found
END COUNT
Put this in the .rtf before your data should appear or else it won't work.
Hope this helps!
Kris

The requested URL /Site/Home.html was not found on this server - HELP!

NOT FOUND: The requested URL /Site/Home.html was not found on this server.
This comes up when I type in my website address. I am new to this, have created my website on iweb, bought the domain name and purchased web hosting with 123-REG. I ask for their help but have only received the same rote info and nothing that has solved my problem.
I am using Cyberduck as my FTP client but tried Classic FTP for macs before this and although it says that I am connected, it is saying that it can not change to the directory hosting10.123-reg.co.uk and asks if I have permission to be using it? I am not sure what to do?
Please could someone advise me?
Thanks!

Welcome to the Apple Discussions. Since you're not using MobileMe these pages might be of some help to you:
http://homepage.mac.com/thgewecke/iwebserver.html
http://iwebfaq.org/site/iWebFolderFTP.html
http://docs.info.apple.com/article.html?path=iWeb/2.0/en/6838.html
OT

Data source executive could not be found

Hello there, I have recentley did my first dynamic website
using coldfusion MX 7. After I uploaded all the files in the server
of godaddy.com on a window platform which supports cfm, I had
realised that all the DSN routes were still
C:cfusion7\wwwroot\database\executive.Users... so I changed all the
tags to D:\Hosting\executivemalta\database\executive.Users....
Unfortunatley I keep on receiving the error Data source executive
could not be found! I have also created an access database from the
godaddy control panel and located the database to a folder called
accesscf and changed the DSN route as instructed by godaddy.
Unfortunatley that didn't even work. Could somebody out there be
generous enough to help me solve this problem? The following is the
error:
Error Occurred While Processing Request
Data source executive could not be found.
The error occurred in D:\Hosting\executivemalta\index2.cfm:
line 4
2 : <cfset MM_redirectLoginSuccess="../homepage.cfm">
3 : <cfset MM_redirectLoginFailed="../failed.cfm">
4 : <cfquery name="MM_rsUser"
datasource="#Request.DSN#">
5 : SELECT Username,Password FROM
D:\Hosting\executivemalta\accesscf\executive.Users WHERE
Username='#FORM.username#' AND Password='#FORM.password#'
6 : </cfquery>
DATASOURCE executive
Please try the following:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.1.4322)
Remote Address 212.56.128.21
Referrer
http://www.the-executive.biz/index2.cfm
Date/Time 08-Aug-06 11:17 PM
Stack Trace (click to expand)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
java.sql.SQLException: Data source "executive" not found.
at coldfusion.sql.DataSrcImpl.validate(DataSrcImpl.java:90)
at coldfusion.sql.SqlImpl.validate(SqlImpl.java:203)
at
coldfusion.tagext.sql.QueryTag.doStartTag(QueryTag.java:443)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:343)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:210)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:50)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:105)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Hi,
I updated Sources\SXS with fresh files and now it looks like it works?????
/SaiTech

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\......\Application Data\Apple\Apple Software Update\

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Print link on report shows 'no data found' when LOV has not been used

Hi all,
I have a simple standard report that queries data based on the value in a Select List. This Select List allows users to pick a year for the report. The LOV has a default of TO_CHAR(SYSDATE,'YYYY').
If I open the page using the associated Tab everything wotks OK. However, if I open the page via a button on my home page, the prink links fails:
The page opens OK, the select list defaults OK and the report shows the correct data. However, if I click on the 'Download as CSV' or 'Print' links I get 'no data found'.
If I update the LOV to 2010 everything works. If I set it back to 2009 evenrything works. I just cant get it to work when I open the page.
I have tried adding computations to get this to work, but this does not seem to help.
Any ideas?
Thanks,
Martin

Hi,
It would depend on what has been added, if anything, to the redirect. The redirect should just function as though you had typed in a URL into the address bar and pressed Enter. The page doesn't get submitted, so any data entered onto the page itself is, unless it is already in session, lost. A button, however, should submit the page and Apex will store all values in the session. So, if the value you need for the LOV is from the previous page, then this is the preferred method - but, note, that the redirect can also store values provided the page item name and the value is included in the redirect's URL string
Andy

Data source CFMXBible.mdb could not be found.

Hello
I am following the book CFMXBible and I got it set up.
but in the beginning of the tutorial there is a form that is
suppose to sent the contents of my form to the db.
After I press the submit button, I get this error’
What is wrong here?
What should I do?
thanks
The web site you are accessing has experienced an unexpected
error.
Please contact the website administrator.
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
Data source CFMXBible.mdb could not be found.
Resources: · Enable Robust Exception Information to
provide greater detail about the source of errors. In the
Administrator, click Debugging & Logging > Debugging
Settings, and select the Robust Exception Information option.
· Check the ColdFusion documentation to verify that you are
using the correct syntax. · Search the Knowledge Base to find
a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
Remote Address 127.0.0.1
Referrer
http://server:8500/cfmxbible/ch02/companyaddform.cfm
Date/Time 05-May-06 01:23 PM

Hello
I am following the book CFMXBible and I got it set up.
but in the beginning of the tutorial there is a form that is
suppose to sent the contents of my form to the db.
After I press the submit button, I get this error’
What is wrong here?
What should I do?
thanks
The web site you are accessing has experienced an unexpected
error.
Please contact the website administrator.
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
Data source CFMXBible.mdb could not be found.
Resources: · Enable Robust Exception Information to
provide greater detail about the source of errors. In the
Administrator, click Debugging & Logging > Debugging
Settings, and select the Robust Exception Information option.
· Check the ColdFusion documentation to verify that you are
using the correct syntax. · Search the Knowledge Base to find
a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
Remote Address 127.0.0.1
Referrer
http://server:8500/cfmxbible/ch02/companyaddform.cfm
Date/Time 05-May-06 01:23 PM

Microsoft.Exchange.WebServices.Data.ServiceResponseException : The specified folder could not be found in the store

In office365, I am trying to access conversation history folder of another user using EWS api.The user that is trying to access has full access rights of the mailbox . If i connect to the mailbox using owa, i can access the conversation history folder
including all other folders. But when i try to connect from the code using ews api below exception is being thrown:
Microsoft.Exchange.WebServices.Data.ServiceResponseException occurred HResult=-2146233088 Message=The specified folder could not be found in the store. Source=Microsoft.Exchange.WebServices StackTrace:
Here is the relevant code
var mailbox = new Mailbox(lyncUser.UserName);
var lyncFolderId = new FolderId(WellKnownFolderName.ConversationHistory, mailbox);
var lyncFolder = Folder.Bind(_exchangeService, lyncFolderId);
Also, the exception doesn't occur if connected to WellKnownFolderName.Inbox.

The WellKnowFolderEnum only works if the folder was created via the Lync 2013 client if the Mailbox is old and has been using older lync clients then you need to search for the folder via name eg see
https://msdn.microsoft.com/en-us/library/office/hh243707%28v=office.14%29.aspx . Generally you want to use both methods eg try to bind to the WellKnowFolderEnum first then use the search method if that fails.
Cheers
Glen

Error message @ Win 7 Pro start up "There was aproblem starting C:\programdata\ofpviaowu.dat - The specified module could not be found."

Error message @ Win 7 Pro start up "There was a problem starting C:\programdata\ofpviaowu.dat - The specified module could not be found."
This error message appears every time I start (boot) my computer and windows starts (Firefox is not running at start up). Firefox 15.01 functions properly otherwise.
This started after I installed the 15.0.1 patch.
I uninstalled and reinstalled Firefox but the problem remains. Google search for "ofpviaowu.dat" came up with "2012-08-29 Firefox Release 15 Startup Crash Report" as the only listing.
Is this a Firefox issue?

hello QAMgr, i'm not aware of this file being a part of firefox & also find it slightly suspicious that there are no more google search hits. maybe this is malware related... could you do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes]?
[[Troubleshoot Firefox issues caused by malware]]

When you try to send or to receive email in Outlook 2010, you may receive one of these error messages: 0x8004010F: Outlook data file cannot be accessed. or 0x8004010F: The operation failed. An object could not be found.

0x8004010F: The operation failed. An object could not be found.
1. reviewed Profile instructions
2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst
3. Back to Profile Instructions.
4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
and gmail address PST. Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
5. Set up another new profile with my email address and a named pst. Run Outlook under that Profile -
comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile. Tried different approaches and still ended up always with the gmail address pst. Deleted
all profiles but email address and comes up.
6. Should I just go ahead and use the gmail address pst I need to import data or download data from gmail
to get last years correspondence.e
7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
Help?
8. One option is to merge psts but might make worse mess.
Thanks. Beautiful Beach weather here!

To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
Step 1- Locate the default Outlook data file
Click Start, and then click Control Panel.
In Control Panel, click Mail.
In the Mail Setup - Outlook dialog box, click Show Profiles.
Select your current Outlook profile, and then click Properties.
In the Mail Setup - Outlook dialog box, click Data Files.
Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
Click Close.
Step 2 - Create a new Outlook profile
Step 3 - Configure your new Outlook profile as the default profile
More detailed steps you can refer to this KB article:
http://support.microsoft.com/kb/2659085

Data source "" could not be found.

I have my local server and my page is fine, but my page
don’t works when access to my page from my remote server
(hosting), say: “Data source image could not be found”,
why?, what happen?, what is wrong?, I need your help!!!
Please!

nick5735 wrote:
> how do you set up that on the remote server. the web
hosting company does not allow me to access the coldfusion
administrator through their service.
who's your host?
look in their FAQ - they should have a procedure outlined
there.
it usually involves contacting their tech support and asking
them to set
up your cf dsn for you.
you usually have to provide some of your account details,
your db name
(you also usually have to create/upload it first on/to your
server), dsn
name you want, db type (don't forget to specify driver
requirement if
any) + maybe some other info as well
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

ApEx 4: after upgrade, "when no data found" message on report not shown

I have a page that displays a tabular form. Initially, the table is empty, and so I have text in the "when no data found" block of the report attributes.
After upgrading to ApEx 4, this text is no longer shown when no results are returned. It displays the table header, but no rows. So for some reason, it thinks data is being returned -- even though the table is completely empty. I've tried several permutations, but have not been able to find a workaround.
I'll try to set up a standalone page, but I can provide a pointer to the existing page on apex.oraclecorp.com on request.
UPDATE: I think this may be related to the bug I reported on tabular forms.
Is it possible that the empty, hidden row we are adding now counts as a returned row, even though the SELECT statement returned nothing? And thus the report never thinks that there is no data found? This would also explain why it's displaying the table headers, even though no rows are visible.
Edited by: kswartz on Jul 8, 2010 12:18 AM

Interesting. I didn't see anything about this change in behavior in the Release Notes. Did I miss something? It definitely didn't do this in 3.2.
Overall, I think that's actually a very non-obvious change. Seeing a set of table headers with nothing below it looks to me like a mistake. Why would you ever show headers for something when you have no rows? In fact, I thought that was a bug the minute I saw it. With due respect, I don't think the new design is less desirable from a usability perspective than the old one.
It also doesn't work as you described regarding the proportions: in my case, the columns in the header row did not match the sizes of the columns as I defined them. Although I didn't place anything beside the tabular form, if I had, it would still alter the layout when "Add Rows" is clicked. If you know what the size of those columns is supposed to be (because they are text fields of size xyz, for instance), why wouldn't you define the header cells to use that information? You won't get it exact most of the time, but you can get close, if they're all text fields of specific width.
Plus, there's nothing on the Report Attributes tab that indicates the "When No Data Found" option won't apply if you are using a tabular form. The textareas should be disabled -- and at the very least, the on-line help should be mentioning this. It doesn't mention anything about this only applying to standard reports.
Finally, I think you should also put this in the Release Notes, because this requires changes to any application where someone with a tabular form required this. In one case, that was where I provided instructions to users entering data for the first time. Now I have to move it. (Not a big deal, but it would have been nice to know that in advance.) On another page, I put a JavaScript block in there to submit and automatically add a row, because I wanted there to always be a blank row if nothing had been entered -- and that was the easiest way. Okay, granted, that's probably not something you intended to support, but there was nothing wrong with it, technically. And, again, it's fixed by moving that block to the header instead and testing for the number of rows in the table -- easy, now that you provide JQuery for us -- but still manual migration work.
Thanks for the explanation.

Should not raise no data found error

Hi Experts,
I am using select into statement in procedure and put some condition in select statement.
I want if condition failed then it sould put null in to target variable . It should not raise no data found error
e.g
select abc into v_abc from table
where cond1=cond;
if this select statement no give any record it should put null into v_abc and not raise no data found error
pls suggest something
UG

You could do...
SQL> ed
Wrote file afiedt.buf
1 declare
2    v_abc varchar2(20);
3 begin
4    SELECT
5      CASE
6        WHEN (select COUNT(*) from emp where empno = 1234) > 0 THEN
7          (select ename from emp where empno = 1234)
8        ELSE
9          null
10      END
11    INTO v_abc
12    FROM dual;
13* end;
SQL> /
PL/SQL procedure successfully completed.But that's no better than doing a check first as a seperate SQL in the PL/SQL.
I would do this... (if I really didn't want the no_data_found exception)
SQL> ed
Wrote file afiedt.buf
1 declare
2    v_abc varchar2(20);
3 begin
4    SELECT max(ename)
5    INTO v_abc
6    FROM
7      (
8      SELECT ename from emp where empno = 1234
9      UNION
10      SELECT null from dual
11      );
12    dbms_output.put_line(NVL(v_abc,'!null!'));
13* end;
SQL> /
!null!
PL/SQL procedure successfully completed.
SQL> ed
Wrote file afiedt.buf
1 declare
2    v_abc varchar2(20);
3 begin
4    SELECT max(ename)
5    INTO v_abc
6    FROM
7      (
8      SELECT ename from emp where empno = 7782
9      UNION
10      SELECT null from dual
11      );
12    dbms_output.put_line(NVL(v_abc,'{null}'));
13* end;
SQL> /
CLARK
PL/SQL procedure successfully completed.
SQL>

HTML DB not data found

Similar Messages

Maybe you are looking for