HTML dynamic content email bursting (no attachment)

Hello,
Could you please advise if the below scenario is feasible using BI Publisher:
An email need to be bursted. This email should have an html template in it (with some dynamic values, like name, etc. - "Dear X,"). This html template should include some images and a very specific format.
There has to be no attachment - the only place with dynamic fields should be an email body formatted as a specific template (html).
I've done some investigation on the web and metalink so I know I can specify the body content (parameter 6) and even a dynamic one.
Can I include HTML tags/HTML template as the email body?
Could anyone please advise?
Thanks,
Michal
Edited by: MichalB on Aug 1, 2011 12:36 PM
We're using BIP Release 10.1.3.4
Edited by: MichalB on Aug 1, 2011 4:35 PM

I am assuming, you are using bursting from Enterprise Release. First try file delivery. If it works fine, then make sure you set the delivery SQL setting properly. You can validate from the following mapping.
KEY
TEMPLATE_FORMAT
TEMPLATE
LOCALE
OUTPUT_FORMAT
DEL_CHANNEL=>     EMAIL
PARAMETER1 =>     To Email address
PARAMETER2 =>     Cc Email address
PARAMETER3 =>     From
PARAMETER4 =>     Subject
PARAMETER5 =>     Message Body
PARAMETER6 =>     Attachment (true/false)
PARAMETER7 =>     Reply-to
Regards
Ashish

Similar Messages

Email bursting without attachment

Dear all,
while using email bursting to send out bi report, we have to provide a sql. my sql statement is here:
select distinct
Operation."Market Director (MD)" KEY,
'Standard' TEMPLATE,
'RTF' TEMPLATE_FORMAT,
'en-US' LOCALE,
'PDF' OUTPUT_FORMAT,
'EMAIL' DEL_CHANNEL,
Operation.EMAIL PARAMETER1,
'[email protected]' PARAMETER2,
'[email protected]'PARAMETER3,
'Your Invoices' PARAMETER4,
'Hi' PARAMETER5,
'true' PARAMETER6,
'[email protected]' PARAMETER7
from "BE Daily Sales FnP Cost Analysis".Operation
However, I did not receive any PDF attachment with only the email file output.
Anyone knows how I can solve this problem? It is urgent!
Thanks a lot ~!

You can do it by scripting your own submit button.
So use a regular button and put the following on the click event of the button. The operators can point to field rawValues instead of hard coding the values (cTo, cCC, cSubject, cMsg).
var oDoc = event.target;
oDoc.mailDoc({
bUI: true,
cTo: "[email protected]",
cCC: "[email protected]",
cSubject: "This is my email subject",
cMsg: "This is my email message"

Email bursting send report as HTML in email body

Hello,
I have Oracle BI Publisher 10.1.3.4.1 (build# 1101) version installed as part of Oracle Business Inteligence.
I have question about email bursting. I created simple report and I am bursting it via email. But I would like to send report in HTML as part of email body and not as attachment. I read that it is possible in other versions of BIP (as part of EBS) with using of bursting configuration file. But I can not use this file with my version of BIP, I can configure bursting only vie SQL query.
Is there any solution?
Thank you

My bursting SQL query:
SELECT DISTINCT
ip.APPL_ID KEY,
'11F_Search_Prospect_Email' TEMPLATE,
'RTF' template_format,
'en-US' locale,
'HTML' output_format,
'EMAIL' DEL_CHANNEL,
ip.email PARAMETER1,
'[email protected]' PARAMETER3,
'Welcome' PARAMETER4,
'true' PARAMETER6
FROM ugrad.inquiry_prospect ip,
ugrad.correspondence f,
ugrad.address e,
ugrad.f_lookup fl
WHERE ip.appl_id = f.appl_id
AND ip.APPL_ID = e.APPL_ID
AND fl.TYPE_CODE='C'
AND ip.record_stage = 'Prospect'
AND e.COUNTRY_CODE=fl.code
AND e.table_name = 'INQUIRY_PROSPECT'
AND e.address_type =
NVL ((SELECT gg.address_type
FROM ugradadm.address gg
WHERE gg.address_type =
DECODE (f.mailpref,
'Home', 'HOME',
'Best', 'LOCAL',
'HOME'
AND gg.table_name = 'INQUIRY_PROSPECT'
AND gg.APPL_ID = ip.appl_id
AND((gg.address_type='LOCAL' AND NVL(gg.address_expir_date,sysdate)>sysdate)
OR gg.address_type='HOME')),
'HOME'
AND f.batchid = :Batch_ID
This report when bursted sends an email with the layout template as html body.
The EMAIL configuration is set with a server Port number and its host address.

How do I customize the Email Attachment name in Email Bursting?

I had worked on BI Publisher extensively on 10g and 11g. I have a client requirement with BIP email bursting to deliver the reports as email attachments. I'm able to do it, and also customize mail body etc. However the email attachment file name is randomly generated with some numbers. I read through the docs, and couldn't find any parameter mapping to the attachment/file name (like we do it with File bursting). How do I specify the mail attachment file names in my Busrting properties?
Thanks,
Padma

Please go through the following link:
http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html
I think after the 'Output' we can specify the filename

BI Publisher Email Bursting with HTML code

Hi ,
Possible to use the following HTML hyper link code in the email deliver
*<a herf="www.google.com">google</a> parameter5*
tried but no luck Please tell me the solutions.
Thx
Edited by: 924603 on Nov 9, 2012 10:51 AM
Edited by: 924603 on Nov 9, 2012 10:52 AM

I am facing a strange problem in EMAIL Bursting using Java API. If I am sending 10 PDF files as attachment to 10 recipient, status is showing as successful. But not all recipients are getting EMAIL attachment. only 8 people are getting attachments. Can any one help me out in removing this problem. How to send attachments to all recipient?

Creating a dynamic content link in Eloqua HTML editor

I'm using dynamic content to populate a link on an HTML landing page. I drag and drop the dynamic content, and the following code shows up:
<a href="<span title="Dynamic Content - Member Station Donation Page URL" elqid="18" elqtype="DynamicContent" class="remove-absolute" style="display: block"><span class="eloquaemail" style="-moz-user-select: all; -webkit-user-modify: read-only" unselectable="on">Member_Station_Donation_Page_URL1</span></span>">
But when I save the page, the editor changes the HTML to this:
<a href="<span title=" dynamic="" content="" member="" station="" donation="" page="" url"="" elqid="18" elqtype="DynamicContent" class="remove-absolute" style="display: block"><span class="eloquaemail" style="-moz-user-select: all; -webkit-user-modify: read-only" unselectable="on">Member_Station_Donation_Page_URL1</span>">
which breaks the link. How can I format the dynamic content so the Eqolua editor doesn't screw it up?

Hi Cootis,
You can simply take one conatiner and create the textInput dynamically at runtime in ActionScript. Check the sample simplest code below..
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
<![CDATA[
     private var arrayCollectionList:Array = new Array();
     private function addTextInputToForm() : void
       var textInput:TextInput = new TextInput();
       textInput.width = 250;
       textInput.height = 25;
       boxContainer.addChild(textInput);
]]>
</mx:Script>
<mx:VBox verticalGap="5" horizontalCenter="0">
<mx:VBox id="boxContainer" verticalGap="5">
   <mx:TextInput id="txtInput" width="250" height="25" />
</mx:VBox>
<mx:LinkButton id="lnkButton" label="Add Another Item" width="250" click="addTextInputToForm();" />
</mx:VBox>
</mx:Application>
Thanks,
Bhasker

Emails & Dynamic Content

Hello,
I'm pretty new to Eloqua and the Eloqua REST API.
I have a use case where I want to be able to pull emails with dynamic content out of Eloqua, translate them, then put them back in.
Can anybody give me some guidance here as to whether this is possible using the REST API, and which API calls I should be using to achieve this?
Any tips greatly appreciated.
Thanks,
Jimmy

Hi Jason,
We've added basic support for Dynamic Content and Content Sections in the C# Client available here.
Hope this helps,
Fred

Get HTML (Dynamic Converter) converted content from external application

As per requirement, External (Other java application) application suppose to get dynamic converted (HTML version) content from UCM.
I am trying to execute GET_DYNAMIC_CONVERSION service using RIDC and web service client call.
I dont see HTML content is coming as the result of GET_DYNAMIC_CONVERSION service.
Would you please guide me in getting HTML converted document from external application.
Please let me know, if you need additional details.
Thank you in advance
Edited by: 958795 on Sep 12, 2012 3:29 PM

Hi Srinath,
I have tried your response. Still i am getting hda data only, not HTML content.
GET_DYNAMIC_URL service with fileUrl attribute is returning HTML content from UCM GUI (browser) but not from RIDC.
Code i tried is:
DataBinder dataBinder = idcClient.createBinder();
          dataBinder.putLocal("IdcService", "GET_DYNAMIC_CONVERSION");
          //dataBinder.putLocal("dID","1832");
          dataBinder.putLocal("dDocName","ECMPS5_002024");
          dataBinder.putLocal("IsJava","0");
          dataBinder.putLocal("RevisionSelectionMethod","LatestReleased");
          dataBinder.putLocal("DCViewFormat","WebViewable");
          // execute the request
          ServiceResponse response = idcClient.sendRequest (userPasswordContext, dataBinder);
InputStream istream=response.getResponseStream();
InputStreamReader isr = new InputStreamReader(istream);
BufferedReader br = new BufferedReader(isr);
String line = null;
while ( (line = br.readLine()) != null)
System.out.println(line);
}

Applescript: email multliple file attachements

Hello, I setting up a rule using action script in conjunction with Hazel, but im having some problems on the action scropt end. Seems everything works fine except it wants to send a separate email for each attachment, instead of placing them all to one email Can anyone help me with this, this is the code im using:
set mailAttach to (POSIX path of theFile)
set subject_ to "images update!"
set the_content to "Attention, New files have been added"
tell application "Mail"
          set newMessage to make new outgoing message with properties {subject:subject_, content:the_content & return & return}
          tell newMessage
                    set visible to false
                    set sender to "[email protected]"
make new to recipient at end of to recipients with properties {[email protected]@mac.com"}
make new attachment with properties {file name:mailAttach} at after the last paragraph
(* change save to send to send*)
send --<<<<---------------- change save to send to send or send to save to save to drafts
(* change save to send to send*)
          end tell
end tell

At this time playing WAV files from attachments is not possible. You may want to Submit feedback on this and put in a request for it to be a added feature.
http://www.apple.com/feedback/iphone.html
Customers feedback influences changes the most.

Email has no attachment

I have randomly received emails in the past that I know have pdfs in them but mail on my powerbook pro says they have no attachments (no paperclip and no attachment). The emails have been coming from an Exchange server.
This morning I have stumbled across something that might have something to do with the "no attachment" issue.
If I check my email on either my iphone or ipad before my macbook pro and view the pdf on either device or both then go to my mac, it shows the email with no attachment.
Has anyone else had this problem?
If so can you redownload the individual email to get the attachment on the mac or is there a setting or rule that can fix this issue?
@Apple......if this is a bug then you should really look at addressing it as this has been an ongoing issue for a versions of mail now!!

I was one of the persons with the same problem but already solved it.
In my case the problem was related with the signature file but I'm not sure what the problem was.
I solved it this way:
1) create backup of signature file.
2) clear all content from the signature file.
3) restart thunderbird and see if the problem still exists. In my case it didn't.
4) add a content to the signature file tag by tag (in my case as it is html) and repeat #3.
This way I was able to put exactly the same content as before (!!) but no more attachment alerts.

DataGrid Not Resizing to Dynamic Content

Hello,
I'm using Flex 3.2. I have an editable DataGrid with no with
and height specified. I do specify rowCount to something like
rowCount="dataProvider.length". Everything looks good when the
datagrid is first rendered with data in it. However, if the data in
it changes after rendering, then the grid doesn't resize
accordingly. Actually the grid may resize, but the border/frame
doesn't.
Example:
I have a special TextArea component that grows (vertically)
as the user types in more lines of text. I use this component as
one of my item editors. If a cell is first rendered with only one
line of text, then the user goes in and types additional lines, the
grid row grow within it's border, but the not the border itself...
causing some undesired scrollbars.
I need a way to tell the datagrid to re-calibrate sizing just
like it does when it's first created. Is there a way to do this? I
tried datagrid.invalidateSize() and related procedures, but nothing
happens. What do you think?
Thanks

"bfargo" <[email protected]> wrote in
message
news:gmcsal$34d$[email protected]..
>I finding this datagrid sizing to be extremely
frustrating as to say, HTML
> tables. I just want it to look good. Anytime I do
anything with dynamic
> content, it doesn't size right, or I end up with a bunch
of ugly
> scrollbars,
> etc. I just want to be able to add some content, and
have the datagrid
> grow
> with it.. at least in height.
> VariableRowHeight is set to true, I try setting rowcount
to my
> dataprovider
> length. Event though the length may be 5, it'll randomly
throw a bunch of
> other rows in there. The behavior is just completely
incoherent (at
> least to
> me). Nobody else has these problems? .
Post code

EDGE and HTML dynamic text in a "box" with scroll bar

I'm new to EDGE, a win7pro master collection cs5.5 suite owner. I'm mainly in the Film/Video post production field (mostly AE, PPro, Pshop, IA) but have been branching into web design the last couple of years. I use Dreamweaver, Fireworks, Flash. While I'm a expert user with all the Film/video apps, I would say I only have intermediate ability with the web apps. While I understand a lot of programing logic bulding blocks I'm not a coder.
So since we're told "flash is dead", my interest in Edge is to try to do some of the things that I can currently do in flash in EDGE. I was excited when Edge first came out but lost interest when it became obvious that Adobe was not going to offer Edge and Muse to "suite owners" but only in their force feeding of the "Cloud". Better known as the "golden goose" for adobe stockholders and a never ending perpetual hole in the pocket for users. Anyway....
I spent the last couple of days doing some of the tuts and messing with the UI. It's matured a lot since I was here last.
I've been working on a flash site for a sports team where one of the pages is a player profile page where college recuriters and other interested parties can view recuriting relavent info/stats about players. This is how it works. While on the "Team" page a users clicks on a button labled "Player Profiles" . (Animation) A "page" flies in and unfurls from the upper right corner (3d page flips effect created in AE played by flash as a frame SEQ). Once it lands filling most of the center of the screen there is a bright flash. As the brightness fades we see the "page" is a bordered box with a BG image of a ball field(End). (Animation) from behind the border in fly small pictures (player head shots with name and jersey number). They stream in and form a circle like a wagon train and the team logo zooms up from infinity to the center of the circle(End). As the user mouses over a player's pic it zooms up a little and gets brighter (like mouseover image nav thumbs for a image slider). If the user clicks on a player's head shot it flips over and scales up to become a text box with a scrollbar. The content of the box is a mix of images, static and dynamic text fields populated from data in an "player info data base" XML file, and some hyperlinks. It's all kept updated dynamicaly with current stats, info and images from the XML file. There is also a "PDF" button that allows the user to open/save/print a PDF of the player's profile (the PDF's are static files for now but the choice of which pdf to retrive is dynamicaly supplied via the XML file.
So.... Is Edge now able to do something like this? Would it need to be a collection of small animations? could these be "assembled" and connected as an asset in dreamweaver ?
I thought I would approach this from the end (ie click on an image and display a box with dynamic TEXT fileds. ) since that is the most important part, ie displaying the dynamicaly updated profile info. Sooooo....
Can Edge display a scrolling text box with Images, static text, and html dynamic text in it??
Joel

The code is in composition ready. Click the filled {}

How do I add text message to this email with PDF attachment?

Good day, everyone!
Okay, we have a "z"-version of program RFFOUS_T and some of its include codes. One include code, RFFORIO6, has a form called MAIL_PDF_ADVICE. It is in this form that we are emailing a remittance advice form. The actual form is attached as a PDF file.
Unfortunately, there's no text in the body of the email -- it's just the attachment -- so the users would like us to add a couple basic lines in the body of the email that explain the attachment. I'm pretty new to using this particular FM and emailing the PDF attachment, and I've gotten stuck in my research trying to find out exactly how to do this. I'm guessing this shouldn't be all that difficult, but I'm not finding the right solution. Here's the form:
*&      Form mail_pdf_advice
      E-mail PDF advice
     -->IT_ADVICE     PDF form (output from Adobe server)
     -->I_PDF_LEN     length of PDF advice in bytes
FORM mail_pdf_advice USING it_advice   TYPE solix_tab
                           i_pdf_len   TYPE i.
DATA:
    lt_receivers       TYPE TABLE OF somlreci1 WITH HEADER LINE,
    l_user             LIKE soextreci1-receiver,
    ls_send_doc        LIKE sodocchgi1,
    lt_pdf_attach      TYPE TABLE OF sopcklsti1 WITH HEADER LINE.
CHECK NOT finaa-intad IS INITIAL.
CHECK finaa-nacha EQ 'I'.
*--- determine E-Mail sender and recipient
IF fsabe-usrnam EQ space.
    l_user = sy-uname.
ELSE.
    l_user = fsabe-usrnam.         "Office-User des Sachbearb.
ENDIF.
lt_receivers-receiver = finaa-intad.
lt_receivers-rec_type = 'U'.      "E-mail address
APPEND lt_receivers.
ls_send_doc-obj_descr = itcpo-tdtitle.
lt_pdf_attach-transf_bin = 'X'.
lt_pdf_attach-doc_type   = 'PDF'.
lt_pdf_attach-obj_langu = reguh-zspra.
lt_pdf_attach-body_start = 1.
lt_pdf_attach-doc_size   = i_pdf_len.
DESCRIBE TABLE it_advice LINES lt_pdf_attach-body_num.
APPEND lt_pdf_attach.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data              = ls_send_doc
      sender_address             = l_user
    TABLES
      packing_list               = lt_pdf_attach
      contents_hex               = it_advice
      receivers                  = lt_receivers
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
<error checking code snipped>
Does someone know how to do this? <b><REMOVED BY MODERATOR></b> Thanks so much in advance!
Dave
Message was edited by:
        Alvaro Tejada Galindo

Hi Dave,
Table <b>contents_bin</b> is used to pass attachment file and <b>contents_txt</b> is used to pass mail body contents. You need to declare one more int table to give contents for mail body.
For reference check the code below
ut_message is for message body
and ut_attach is having attachement file.
FORM send_file_as_email_attachment TABLES ut_message
                                          ut_attach
                                    USING uv_email
                                          uv_mtitle
                                          uv_format
                                          uv_filename
                                          uv_attdescription
                                          uv_sender_address
                                          uv_sender_addres_type
                                 CHANGING uc_error
                                          uc_reciever.
DATA: l_error                TYPE sy-subrc,
         l_reciever             TYPE sy-subrc,
         l_mtitle               LIKE sodocchgi1-obj_descr,
         l_email                LIKE somlreci1-receiver,
         l_format               TYPE so_obj_tp ,
         l_attdescription       TYPE so_obj_nam ,
         l_attfilename          TYPE so_obj_des ,
         l_sender_address       LIKE soextreci1-receiver,
         l_sender_address_type LIKE soextreci1-adr_typ,
         l_receiver             LIKE sy-subrc.
DATA:   lt_packing_list    LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
          lt_contents        LIKE solisti1   OCCURS 0 WITH HEADER LINE,
          lt_receivers       LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
          lt_attachment      LIKE solisti1   OCCURS 0 WITH HEADER LINE,
          lt_object_header   LIKE solisti1   OCCURS 0 WITH HEADER LINE,
          l_cnt TYPE i,
          l_sent_all(1) TYPE c,
          lw_doc_data LIKE sodocchgi1.
l_email               = uv_email.
l_mtitle              = uv_mtitle.
l_format              = uv_format.
l_attdescription      = uv_attdescription.
l_attfilename         = uv_filename.
l_sender_address      = uv_sender_address.
l_sender_address_type = uv_sender_addres_type.
Fill the document data.
lw_doc_data-doc_size = 1.
Populate the subject/generic message attributes
lw_doc_data-obj_langu = sy-langu.
lw_doc_data-obj_name = 'SAPRPT'.
lw_doc_data-obj_descr = l_mtitle.
lw_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR lw_doc_data.
READ TABLE ut_attach INDEX l_cnt.
lw_doc_data-doc_size =
     ( l_cnt - 1 ) * 255 + STRLEN( ut_attach ).
lw_doc_data-obj_langu = sy-langu.
lw_doc_data-obj_name   = 'SAPRPT'.
lw_doc_data-obj_descr = l_mtitle.
lw_doc_data-sensitivty = 'F'.
CLEAR lt_attachment.
REFRESH lt_attachment.
lt_attachment[] = ut_attach[].
Describe the body of the message
CLEAR lt_packing_list.
REFRESH lt_packing_list.
lt_packing_list-transf_bin = space.
lt_packing_list-head_start = 1.
lt_packing_list-head_num = 0.
lt_packing_list-body_start = 1.
DESCRIBE TABLE ut_message LINES lt_packing_list-body_num.
lt_packing_list-doc_type = 'RAW'.
APPEND lt_packing_list.
Create attachment notification
lt_packing_list-transf_bin = 'X'.
lt_packing_list-head_start = 1.
lt_packing_list-head_num   = 1.
lt_packing_list-body_start = 1.
DESCRIBE TABLE lt_attachment LINES lt_packing_list-body_num.
lt_packing_list-doc_type   = l_format.
lt_packing_list-obj_descr = l_attdescription.
lt_packing_list-obj_name   = l_attfilename.
lt_packing_list-doc_size   = lt_packing_list-body_num * 255.
APPEND lt_packing_list.
Add the recipients email address
CLEAR lt_receivers.
REFRESH lt_receivers.
lt_receivers-receiver = l_email.
lt_receivers-rec_type = 'U'.
lt_receivers-com_type = 'INT'.
lt_receivers-notif_del = 'X'.
lt_receivers-notif_ndel = 'X'.
APPEND lt_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data              = lw_doc_data
      put_in_outbox              = 'X'
      commit_work                = 'X'
    IMPORTING
      sent_to_all                = l_sent_all
    TABLES
      packing_list               = lt_packing_list
      contents_bin               = lt_attachment
      contents_txt               = ut_message
      receivers                  = lt_receivers
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
Message was edited by:
        Amit Kumar

Dynamic file name as mail attachment in receiver Mail Adapter?

Hi,
Can any one tell the possibility of attaching file as a mail attachment without using mail Package with dynamic filename.
Business requirement is to send error response as mail attachment with dynamic name.
Ex: Error_Response_20110802_13.24 where 20110802 is Date and next part represents time stamp.
File attachment name should change dynamically in Mail receiver Adapter. Thanks
Regards,
Sreeramulu Konjeti.

there is no standard way.
you will have to write a module to get this in place.
other ways are;
XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping - /people/stefan.grube/blog/2007/04/17/xi-mail-adapter-an-approach-for-sending-emails-with-attachment-with-help-of-java-mapping
Dynamic name in the mail attachment - pseudo "variable substitution" :
/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution

Adding pagination in report build from PL/SQL dynamic content using htp.p

Hi,
I have a requirement for which i used PL/SQL dynamic content to build my report and i displayed my report using a cursor and loop by HTP.P function.
Now problem is I have report with more than 500 rows and I want to add pagination concept for this report.
How can i do that?
Thanks in advance.
Regards,
Smith

To preserve heading on each page for a HTML table you can use the THEADER, TFOOTER and TBODY tags (see example). To force page breaks, try experimenting with these style attributes:
<STYLE TYPE="text/css">
tr.breakhere {page-break-before: always}
</STYLE>
<tr class="breakhere">Table Example:
htp.tableopen;
htp.print('<THEAD style="display:table-header-group">');
... your table headers here
htp.print('</THEAD>');
htp.print('<TFOOT style="display:table-footer-group"><TR><TD></TFOOT>');
htp.print('<TBODY>');
... your rows here
htp.print('</TBODY>');
htp.tableclose;Edited by: crokitta on Apr 8, 2009 2:07 PM

HTML dynamic content email bursting (no attachment)

Similar Messages

Maybe you are looking for