HTML view does not load first time?

All,
I have two HTML views on my Visual Composer model which both have 'Start' connectors going into them with the URL's defined (and correct), but when the page first loads the HTML views just show as gray boxes.
To get the HTML views to display the user needs to refresh the page then they appear!?
Has anyone also experienced this? If so how did you resolve this problem, because this is unacceptable to the user?
Thanks
Conrad

Hi Antonio,
thanks for your reply.
The problem that we seem to be having now is that 90% of the time the html views load but some times they don't, they just remain as gray boxes.
I tried the simple demo that you suggested and it worked for me also, but as i said the problem only sometimes occurs.
It maybe as you said a problem because i have lots of epcm events flying about and JavaScripts.
I will try and get a consistent failure, take it from there and keep you posted.
Thanks
Conrad

Similar Messages

JSP / HTML page does not load correctly in IE

I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. None of the people in my team were able to solve this issue.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.
In case you need an HTML version of the code, please do mail me at [email protected]

Jaison_Sabu wrote:
I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. Why would you be sending large amounts of data to a JSP? Sounds fishy to me.
None of the people in my team were able to solve this issue.Well if you provided your team with the same amount (none) of information you provided here, then I would understand.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.Personally, I think it's the flux capacitor.
In case you need an HTML version of the code, please do mail me at [email protected]
Hope you're ready for some spam.

Flash file not loading first time but loads on refresh

I have a problem where a flash program is not loading when
the webpage is first visited, it will get stuck on the loading
screen. Now for this file to finish loading, it needs to load in
another file. Once that file is done loading then the program will
continue. But like I said the first time the program gets stuck on
the loading screen and never continues. If you hit refresh in the
browser then the program will continue past the loading screen.
I've checked the code and everything seems fine there. Could
this be a security issue? The two files are on the same domain. Or
if anyone has any insight into this problem, it would be
appreciated.

"Dusarn" <[email protected]> wrote in
message news:e3b9i7$qup$[email protected]..
>I have a problem where a flash program is not loading
when the webpage is first
> visited, it will get stuck on the loading screen. Now
for this file to finish
> loading, it needs to load in another file. Once that
file is done loading then
> the program will continue. But like I said the first
time the program gets
> stuck on the loading screen and never continues. If you
hit refresh in the
> browser then the program will continue past the loading
screen.
>
> I've checked the code and everything seems fine there.
Could this be a
> security issue? The two files are on the same domain. Or
if anyone has any
> insight into this problem, it would be appreciated.
That is almost always caused by a faulty preloader code. Post
your preloader code or a link to the website so it can be checked.
tralfaz

Hierarchy Viewer does not load after clicking on the + icon

Premise: I have a hierarchy viewer with multiple levels of master-detail with different VOs.
The inputs to the taskflow containing this page are the key and VO type. The tree should render until that VO which matches the type and key and all the next level children under it. The user can expand the nodes under these children at will to drill further.
Issue: I am able to render the tree with results. When I click on the + icon to drill on the children, I see that the backend code for fetching the children is called. But, the tree does not display. It shows the loading icon forever.
Example:
Organization - PO - POItem - Vendor - VendorSite -VendorAddress
                                                       - Responsible - ContactDetails
                    - Project - SubProject - Location
TaskFlow Input: Vendor, 12345
The tree should dispaly Organization - PO - POItem - Vendor(12345) - VendorSite(for 12345)
                                                                                                    -Responsible(for 12345)
If the user expands any of the VendorSites, the VendorAddresses should be shown
Technical Details: JDeveloper Version: 11.1.2.1.0
Code: To filter the children, I am overriding the CreateViewLinkAccessorRS in the VOImpls. I am passing bind variables to the VO criterion to check the paths.

@Arunkumar: Yes, I ran the AM tester and I am able to see the results properly for all the VOs and levels.
I created a sample on the HR Schema and tested. I see that when I click on the Employee node for expansion(can be checked with the data or the short description), it hangs with the load icon.
I do not see anything in the log other than:
<RegionRenderer> <encodeAll> The region component with id: r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
I do not see any upload options here to give my testcase. So, I uploaded to this link: https://www.dropbox.com/s/vybip3owzuziz86/HRHierarchyViewer.zip
Please let me know if I can do this elsewhere for easy access.
Message was edited by: Divya Bellamkonda

JSFF CSS not loading first time

Hi everyone,
My JSFF refers to a CSS when the jsff starts the first time it doesn't show any styles but when I press F5 the styles are shown
this is my jsff
<ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                xmlns:f="http://java.sun.com/jsf/core">
    <af:resource type="css" source="/recursos/css/utiles.css"/>
...etc...QUESTION 2:
Is there a way to set a hint for an <af:inputtext> ??
just like there is in amx for web mobile? HINT TEXT ?
THANKS!!!

Sorry for the late response,
Yes is inside the public_html, because I have my css and js inside a folder in the webcontent
when my jsff loads no styles or js behavior loaded, then I press F5 and the styles are shown and what the javascript does also y noted
here is my code.
<?xml version='1.0' encoding='UTF-8'?>
<ui:composition xmlns:ui="http://java.sun.com/jsf/facelets"
                xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                xmlns:f="http://java.sun.com/jsf/core"
                xmlns:adfsilat="/webapp/untitled1.taglib">
                <af:resource type="css" source="/recursos/css/utiles.css"/>
                <af:resource type="javascript" source="/recursos/js/tagscript.js"/>
...

UI configuration not loaded first time when view is enhanced

Hi,
I did enhancement on the view BP_SALES/CorpAccountShippingEF in component BP_SALES
There are UI configuration to be loaded based on the condition (life cycle stage) and for which enhancement has been done in spot CRM_UIU_BP_ENHANCEMENT.
All works fine untill I simply create a enhancement for the above mentioned view. Once I do the enhancement, without making any further changes, the UI config that should get loaded doesn't load and is loaded with the default one.
However on pressing enter, the desired config get loaded and all the mandatory fields show up.
If I delete the enhancement for this view, then it works fine.However I need to enhance the view to default some values.
Does anyone know why this is happening?
Many thanks in advance for your help.
Cheers,
Rakesh

Hi,
Probably,when you enhance,some particular field ,which decides the runtime configuration to be loaded,is not getting its proper value.
You can test this by putting a brkpoint in the method DO_CONFIG_DETERMINATION of your class.
Do this wihout the enhancement first.
So when you test,you would be able to see which configuration is loading for the 1st time,and also why.
After this test it with the enhancement.This will help you to differentiate between the 2 scenarios,and probably also help you to identify the issue.
Suvidha

Every time I open creative cloud it does not load. Is there anything I can do to fix it.

Every time I open creative cloud it does not load. Is there anything I can do to fix it.

Hi Tahmid,
Please refer to the threads below where this issue has been addressed:
New Creative Cloud App unusable: it's blank!
creative cloud is blank window why?
Re: Creative Cloud app opening blank
Regards,
Sheena

Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

My iphoto library, located on time capsule ( +/- 50G) does not load at all after upgrade to OSX to Yosemite ?

Dear all,
I am guessing, this is not the end for accessing to my iphoto (last update) library, my life memories, but after upgrade to OSX Yosemite, my iphoto library, located on time capsule (+/- 50G) does not load at all. I have sent the report to Apple.
I am, worried to save or see my pictures back.
Thanks fo your help.
Clémentine

eurclem wrote:
Hi Larry,
Sorry, for the delay, in the meantime I have restored my previous OS.
But to answer you, basically , I use the time capsule as both a backup volume and an external drive.
It's a 1 To Capacity.
Best Regards,
Clémentine
That is a bad idea
1 - since you have files on the same disk as your backup you have no backup for those files which apparently includes you photos - having no b means it is just a matter of time until you lose them
2 - The TimeMachine backup grows until it fills the volume it is on - when the TC is full iphoto (and maybe other programs) will stop workig due to lack of space
You need at least two external hard drives - one for the iPhoto library (this one needs to be directly connected with a fast wired connection like Thungrbolt, Firewire or USB and be formatted Mac OS extended (journaled) ) and a separate EHD for you TM backup
LN

Upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tryed to reinstall still asking for reboot still does not load

Question
upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tried to reinstall still asking for reboot still does not load
what can i do cannot uninstall either
thank you

Question
upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tried to reinstall still asking for reboot still does not load
what can i do cannot uninstall either
thank you

Applet does not load on app server when Free Design Layout

Hi,
I have to embed a an applet in a webpage of an web application. Before I go on to anything.. let me first tell you, I am using Netbeans 6.0
As shown in the tuorial:
[http://www.netbeans.org/kb/articles/tutorial-applets-40.html]
1. I first made the "Applet" source say HelloApplet. java. After compiling and running it I get the HelloApplet.jar.
2. I created a WebApplication and then from the properties -> packaging -> I "Add Project" HelloApplet.jar.
3. Then I a webpage I "embeded" the applet.
4. I run the web app and the applet gets loaded and everything is just fine.
But before I go on I must tell you that the applet was designed in Null Layout. Now I edited the applet source once again and changed the layout to Free Design Layout*. ( this is available from Netbeans..on the HelloApplet.java .. go to the design view.. right click on the form and from the context menu you can change the layout to FreeDesign or whatever you might want).
When I expand the "Libraries" node I see the that the library Swing Layout Extensions - swing-layout-1.0.3.jar has been added.
When I "run" the "HelloApplet.java" file, the applet is shown in the appletviewer. No problems with that.
But!
When I try to Clean & Build and Run the WebApplication, the applet does not get loaded. On inspecting the java console I see the following error:
java.lang.NoClassDefFoundError: org/jdesktop/layout/GroupLayout$Group
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
at java.lang.Class.getConstructor0(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: org.jdesktop.layout.GroupLayout$Group
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
... 10 moreIt clearly shows that the Free Design Layout has something to do with the GroupLayout which can be found by expanding the "Swing Layout Extensions - swing-layout-1.0.3.jar". Now when the HelloApplet.jar is created only the HelloApplet.class file gets included together with some other data but NOT the swing extensions. Hence when I run the web app the class file looks for the GroupLayout.class definition but can find it in the jar as its not included when the HelloApplet.jar is created.
But with null layout there isint a problem because null layout takes the definitions from the JRE on the machine.. and so it runs without a hitch.
My Question is : How can I run the applet with Free Design Layout? or is it possible to package the swing layout extensions in the HelloApplet.jar?<</u>
Thanks for all your replies.
Cheers.
Edited by: arijit_datta on May 15, 2008 4:07 PM

Solved.
Here is the solution:
[http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html|http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html]
Cheers..
Edited by: arijit_datta on May 16, 2008 7:41 AM

Scheduling error causing - ORA-00942: table or view does not exist

Hello
I have the following problem, I created an scenario that its supposed to run every 1 hour, it has an interface that moves an amount of records from one table to another (the amount of records is not fixed it changes). The problem arises when the amount of data to move is so big that the hour between executions is not enough and the scenario is still running when a second execution of the same scenario starts to run (as scheduled), so in the interface when the second process is trying to run the loading step it fails and I got the error ODI-1228 Caused By: java.sql.BatchUpdateException: ORA-00942: table or view does not exists. So the scenario fails and it logs this error. I think the error is due to the table in stage being locked by the first execution of the scenario.
I don't want to change the amount of time between executions because it is usually enough, I just want to avoid the execution of a scenario when there is another execution of the same scenario still running, is there any way to do this?.
Thanks
LJ

Hello
Thanks for your answer, I already have the "Interval between repetitions" property set to 1 hour, but when one execution takes more than one hour the scheduler starts another and I have 2 processes accessing the same table and it is when I have a concurrence error on the staging table.
How can I ensure that I wont have two or more executions of the same scenario running at the same time?.
Thanks,
LJ

Drive Utility Help Viewer "does not know how to handle selected URL"

I have Drive Utility 10.5.6, according to . I'm trying to reformat a FAT32 partition on an external drive to Mac OS X Ext. Journaled in preparation for using SuperDuper to back up my Mac HD boot partition. For a time, which seems to have passed, now that erasing the partition has been done. The Disk Utility Help wouldn't work. Instead of putting up topic information, I got a message saying "Help Viewer does not know how to handle selected URL", followed by an reference to an html file that allegedly existed inside a set of folders inside the app. Where, of course, Finder cannot see. Once the erasing was done, Help seems to have come back. I tried Apple Support, but could only get a reference to OS 9 Appleworks macros not working in OS X. No help at all. Is this a question? I don't know. Help is working now. But for a while it was very annoying. It must be one of those little windows glitches that no one ever bothered to fix.

In order to change a FAT or NTFS formatted drive for use with OS X you will need to do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you have an Intel Mac and can partition the drive using GUID then you can have FAT32 and OS X partitions on the same drive.
As for problems with the Help viewer see:
In most cases doing the following will restore the Help Viewer:
1. Trash the following three files, if extant:
/Home/Library/Preferences/com.apple.help.plist
/Home/Library/Preferences/com.apple.helpui.plist
/Home/Library/Preferences/com.apple.helpviewer.plist
2. Trash the /Home/Library/Caches/com.apple.helpui folder.
3. Empty the Trash and Restart.
Visit The XLab FAQs and read the FAQ on the Help Viewer for additional suggestions.

Css does not load

Hello,, I am a creative designer from the netherlands currently working on a project but for the first time i got a problem and cant fix it.
i am working on an website roestengineering.com but firefox does not load the css file but ie does.
please any help is welcome.

That is a problem with the encoding.<br />
Them main page is Unicode (UTF-16) encoded (BOM UTF-16, litte-endian and meta tag).
<pre><nowiki><meta http-equiv="Content-Type" content="text/html; charset=UTF-16">
</nowiki></pre>
The stylesheet is in UTF-8 encoding.<br />
Firefox doesn't like such a mixture and requires to have all the files in the same encoding, so you need to fix that and save the CSS file as well in UTF-8 or UTF-16 encoding in the editor and re-upload the file.<br />
It is probably best to save both files as UTF-8 and make sure not to add a byte order mark when saving the file.

Firefox does not load pages, comes back with server not found

First I thought this was a problem with Firefox 4 beta but now I am having the same issue with 3.6.16
About 70% of the times, Firefox does not open the web page and comes back with "Server not found" message. Interesting thing is it comes back with this message on the first 2 tries and then on the third try for the same link it will display the page. Always, 2 fails and 3rd time it works. Now during the first two times, internet commnection is working and if I try the same URL on IE it works without any issues. This started happening after I tried Firefox 4 beta. 4 is not uninstalled and I am back to 3.6.16. But the issue remains.
I am using Win 7 64 Home Premium, SP1 is not applied yet but all updates are in place.

Well, I'm using Firefox 4.0 and have the same problem. I tried to open my private homepage and my *.net-domain comes back with the "Server not found" message (my *.com-domain loads without any problem - same contents on both websites)
I also tried to open my net-domain in FF portable - without any problems.
Clearing the cache, deleting the cookies etc in FF4 does not help either.
I also had the experience that FF4 does not load CSS5 websites (e.g. deviantart) properly (CSS does not work, website shows simply the html-version, a disgusting look). With FF portable the problem does not exist.
I tried this on different machines (e.g. Windows XP Pro SP3 (office PC), Win7 Pro 64, Win Vista SP2... (home PCs) and there I'm experiencing the same issues with FF4 and various websites.

HTML view does not load first time?

Similar Messages

Maybe you are looking for