HTML5 Extensions for Bridge

Many other Adobe products are moving to HTML5-based panels (http://blogs.adobe.com/cssdk/2013/09/introducing-html5-extensions.html), is there any way to find out if Bridge will do this too?
Thanks

Would love to know that too! Very much hope it will.

Similar Messages

Q: How can I install extensions for Bridge CS6?

Because Bridge CS6 is not supported by Extension Manager anymore, you have to install them manually.
For MXP extension, you can convert it to ZXP extensions with Extension Manager CS6. Then try steps below.
For ZXP extension, use utility software such as 7-zip, WinZip or WinRAR to extract it to a folder.If there is no mxi file after extraction, then it is a CSXS extension.
For CSXS ZXP extension, move the folder to following folder.
Windows: "C:\Program Files (x86)\Common Files\Adobe\CS6ServiceManager\extensions\"
Mac: "/Library/Application Support/Adobe/CS6ServiceManager/extensions/"
For non-CSXS ZXP extension, check the content of the MXI file. Copy all source files defined in "..." to the corresponding destination folders manually. If you are not sure where these files should be copied, please paste the mxi file here.

I just want to correct one comment made here that said that Extension Mnager did not support extensions for Bridge. In fact it is Bridge CS6 (not Extension Manager CS6) that does not support CS Extensions (or Flash Extensions).

HTML5 Extensions for Photoshop CS5 and above ?

Hi guys,
I am trying to get into developing HTML5 extensions for Photoshop, and I'm a little confused about the compatibility of this kind of extension across the different versions.
I have downloaded this starting point code (hallodom/photoshop-extension-example · GitHub) and it runs without problems on Photoshop CC. I just added the manifest.xml file in a CSXS folder, based on what I got from a dummy projet I created with Extension Builder 3.
Now I have tried to make this work in CC 2014, without success. All I did is move the extension from the CEPServiceManager4 folder to simply CEP, and update this part of the manifest.xml :
<HostList>
<Host Name="PHSP" Version="[15.0,15.9]" />
<Host Name="PHXS" Version="[15.0,15.9]" />
</HostList>
The extension appears in the Extensions menu, but when I launch it, the panel appears but is empty, and I get the following error message :
Cannot complete command because the extension could not be loaded.
Also I wanted to know if this kind of extension can be used on CS5, CS6 ? I really would like to make an extension that works at least from CS5 and above.
Thanks for your help!

Hi,
You should probably set the Debug Flag for CC 2014 too, see instruction here:
undavide/PS-Panels-Boilerplate · GitHub
(PS: HTML extensions are for CC onwards, not CS6 and previous versions)
Regards
Davide Barranca
www.davidebarranca.com
www.cs-extensions.com

JS-Linter,a static javascript analysis extension for HTML5 Canvas documents in Flash Pro CC

JSLinter is a extension for Flash Pro CC for static code analysis of timeline javascript in ’HTML5 Canvas’ docs.It helps to detect errors and potential problems in your timeline javascript code .
You can download the extension form my blog here
http://hemanthkumarr.wordpress.com/2013/12/05/js-lintera-static-javascript-analysis-extens ion-for-html5-canvas-documents-in-flash-pro-cc/

Checked just now .It is working for me and i can download the extension.
Can you just verify again and let me know?
-Hemanth

Trying to install the output module for Bridge CC but there is no extensions folder for Windows

I am trying to install the output module for Bridge CC on a Windows system, but there is not an extensions folder in my Bridges CC folder. I have seen several discussions about this issue for Mac's but nothing on a PC. Suggestions that I could use to remedy this situation? - Thanks!

For installing it please download the package as listed in the below mentioned link and follow the install instructions.
http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html
Make sure that you have the most recent version of Bridge CC(6.0.1) installed.
Please follow the below mentioned steps:
Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location as mentioned:
Windows 64-bit:                Go to C:\Program Files (x86)\Common Files\Adobe\Bridge CC ExtensionsWindows 32-bit:
               Go to C:\Program Files\Common Files\Adobe\Bridge CC Extensions
2.   Copy the AdobeOutputModule.workspace file into the Workspaces folder under the Bridge CC Extensions folder (location as mentioned in Step 1).
Do let me know if this helps.
Regards,
Ashutosh

Bridge Extension for Elements 6.0?

I used to have Elements 5.0 and when I double-clicked a photo in Bridge, it'd open in Camera Raw in Elements.
But now I've upgraded (lol) to Elements 6.0 and when I double-click a photo, it asks if I want to open in Windows Viewer/Gallery/whatever. I noticed that when I go into Manage Extensions in Bridge, there is an extension for Fireworks, but no longer one for Elements.
I've tried to search for how to add one, but it either expects me to already know, or takes me round and round in circles.
Does anyone know how to fix this?
Thanks for any advice you have!

When we click on any image in Bridge usually that image is opened in Adobe Photoshop .There is no communication between Elements and Bridge. Can you explain the scenario in more detail?

Is there a linux script for packaging HTML5 extensions

I am looking for a way to package an HTML5 extension in a linux environment. The available downloads don't seem to include a linux compatible executable.
http://labs.adobe.com/downloads/extensionbuilder3.html

You can use the following in a script if you don't mind exposing your
password:
java weblogic.Admin t3://myhost:myport SHUTDOWN system <password> <seconds>
Guy
In weblogic.developer.interest.environment Gaurav Khanna <[email protected]> wrote:
Hi,
Is there a stop script for weblogc 4.5.1 on NT?? There is one for starting
the server.
Thanks

How to read write file in HTML5 extension

Hi,
I think it could be very generic question since moving from Flex to HTML5 extension is loosing ability to read write a file in local file system.
I'm trying to write a log file within extension space but It throws error as 'TypeError: Illegal constructor'
new File(csInterface.getSystemPath(SystemPath.EXTENSION)+"/log/Log_"+.getCurrentDateString+".txt");
does someone have solve for this.
Thanks in advance
MM

Yeah, It could be a reason for nested error but I got the error right before executing "getCurrentDateString". But I kind of figured it out as Javascript looses ability to read write file in user file system except Crome browser, you can read more here. However Adobe has added fs API within CEP which allows user to read and write file in user system.
Here is some peace of code on how to do it, complete API reference check here :
var result = window.cep.fs.writeFile(logFilepath, "Your data goes here");
if(result.err != 0)
throw new Error("Result object has error");
However still this does not provide any method to append the content in existing file as a result if you wanted to write kind of log file, every time you need to first read the file and then concatenate your content to file data then write data again to new file. sound hefty to append content?
I'm hoping if any Adobe staff has any comment on this.
Thanks
MM

Do we need to create distinct extensions for CC and CC2014

I am not using Extension Builder.
If I am creating an HTML5 extension, do I need to create two distinct .zxps and manifest files for CC and CC2014? (Presuming there will be some users who continue to use CC for whatever reason).
I guess I can specify a broad version range for the Host elements in the HostList in the manifest e.g. <Host Name="PHXS" Version="[14.0,15.9]"/>
But looking at the RequiredRuntime:Version and ExtensionManager:Version in the manifests - I'm not quite sure what they mean and whether they preclude using a single manifest for both CC and CC2014.
Thanks for any ideas.

You can support CC and CC2014 but you need to develop for the earlier version e.g. CC and RequiredRuntime:Version 4.0. You are correct to extend the version range of the application to include both CC and CC2014 versions. We have many manifest examples that work for both CC and CC 2014 at: https://github.com/Adobe-CEP/Samples

Extension for adobe edge

Hey,
Any plans to support extension on edge anytime soon?
Thanks,
Maor

We have an extension for creating, managing and uploading flash assets(swf) to our online platform.
With the imminent demise of flash we would like to rebuild our extension to support HTML5 assets.
since adobe have several tools capable of creating these assets, one of them being adobe Egde, we would like to know if there is any possibility of writing an extension for this tool(using extension builder or any other tool)

Looking for Developers / Freelancers to Migrate Flash Panel to HTML5 Panel for new CC 2014

In need of a developer / freelancer who can create an HTML5 based panel extension for the new Photoshop CC 2014. My flash extension panel used in CC (64-bit) will not work in CC 2014, so I need to find someone to migrate it to HTML5 for CC 2014. Please comment or link.

In need of a developer / freelancer who can create an HTML5 based panel extension for the new Photoshop CC 2014. My flash extension panel used in CC (64-bit) will not work in CC 2014, so I need to find someone to migrate it to HTML5 for CC 2014. Please comment or link.

Passing unicode characters from ExtendScript to HTML5 extension

I need to pass some Japanese text from ExtendScript to the HTML5 extension. But when I receive the string from the extension it's broken in the middle.
Is there a way to fix this?

Hi Mylenium,
The program just loads useless to use your words when I try to pass a file from Illustrator to Photoshop and when I click anywhere in Illustrator I get Program "Not responding" it doesn't crashes (stops) it stais opened but it doesn't do anything so I need to close it by force from task manager because I can't do anything with it.... Once I left it over night to save an important file and just in the morning I managed to do that so after a while it comes round but all the time there are different periouds of pending. Anyway this is not normal and I should be able to use the program in normal parameters with a powerful system.
I don't have any processor over load in the task manager I don't have anything unusual that indicates an over load of information, that's my problem. My guess is that I have a system incompatibility but I don't know where so that's why I asked for Adobe's help. Again I didn't had this problem using the same pack (CS5) with a less powerful system...
If there are any creash logs pelase tell me where can I find them ?

Trouble adding in extensions into Bridge cc

I'm not showing an extension folder in bridge. I downloaded extensions for output PDF and can't seem to find where to add them. Please help

You can't use the extension manager for this, you have to put it manual in the correct locations as described in this document:
http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html
Read it carefully before acting, the extension folder you need is in the library of your system and the workspace you need to replace is in the user library which by default is hidden. Use menu Go with option to reveal.
It is not difficult but you must read and try to find the correct locations first before acting.

Introducing HTML5 Extensions

When Creative Cloud was launched in June 2013, we added support for HTML5-based panels in several Adobe products. These new panels open up the world of panel development to a wider range of developers who may be more comfortable working with HTML/JavaScript and CSS. Since June, support for HTML5-based panels has been added to more Adobe products. As of now Photoshop CC, Illustrator CC, Premiere Pro CC and Prelude CC support HTML5-based panels.
A preview of Adobe Extension Builder 3, a new developer tool that supports creating HTML5-based extensions, was launched in June at Adobe Labs. You can download it for free from here: http://labs.adobe.com/technologies/extensionbuilder3/
Starting in the middle of 2014 we will begin removing Flash-based extension support in Creative Cloud products, starting with Photoshop CC. We encourage all developers to start planning and migrating to the new extensibility framework based on HTML5.
HTML5-based panels allow developers to leverage the rich ecosystem of existing JavaScript frameworks and tools when creating their panels. HTML5-based panels share the same technology with web applications, which opens up exciting opportunities for integration with web services.
Check out these videos to see how to build and debug HTML5 Extensions.

You do realize that the goals and interests of Adobe and those of the developer community are somewhat diametrical. Adobe wants to sell its latest products or recently to get people to sign up for creative cloud. The developer community wants to offer their products to a broad audience. That is we do care to support at least a couple of software versions into the past. Supporting only CC would really narrow our group of potential customers especially with the group existing that despise of the "software as a service" route of recent days. Now adding new features to PS CC is great, please keep doing that. HTML5 panels seem like an interesting idea, too.
But removing features from PS CC is a bad idea! In that you do two things. You force developers to develop two panel versions – one Flex based for CS4 through CS6 and one HTML5 based for the future PS CC. By removing support for the flash based panels you have been propagating for the last years you bring your customers into a predicament, too. They can’t use stuff they bought and that uses panels. They will not necessarily get free upgrades to any such products nor will such updates even necessarily be available. In the old perpetual license world that would have been no problem. You could keep you PS CSx (where “x” is any version) installed paralelly and be happy with it.
Today - if you don’t also own CSx - can you keep multiple versions of PS CC installed? I think not. Therefore removing functionality from PS CC that once was in PS CC is a really bad idea in my opinion. Especially since the Flash stuff is Adobe’s own technology it seems kind of nonsensical to kill its support.

HTML5 Extensions

As you may be aware of, when Creative Cloud was launched in June 2013, we added support for HTML5-based panels in several Adobe products. These new panels open up the world of panel development to a wider range of developers who may be more comfortable working with HTML/JavaScript and CSS. Since June, support for HTML5-based panels has been added to more Adobe products. As of now Photoshop CC, Illustrator CC, Premiere Pro CC and Prelude CC support HTML5-based panels.
A preview of Adobe Extension Builder 3, a new developer tool that supports creating HTML5-based extensions, was launched in June at Adobe Labs. You can download it for free from here: http://labs.adobe.com/technologies/extensionbuilder3/
Starting in the middle of 2014 we will begin removing Flash-based extension support in Creative Cloud products, starting with Photoshop CC. We encourage all developers to start planning and migrating to the new extensibility framework based on HTML5.
HTML5-based panels allow developers to leverage the rich ecosystem of existing JavaScript frameworks and tools when creating their panels. HTML5-based panels share the same technology with web applications, which opens up exciting opportunities for integration with web services.
Check out these videos to see how to build and debug HTML5 Extensions.

That sounds nice! I already tried out the demo from Extension Builder 3 Preview and am now trying to go beyond that with an extension panel for Premiere Pro CC 7.0 but somehow I'm not able to find or load the DOM into the objectmodel-viewer of the Extendscript Toolkit CC. According to the JavaScript Tools Guide CC it should be available after application launch or target selection in the Toolkit. Also I couldn't find a host adapter for it. Any hints on that?
Best regards,
Filip

HTML5 Extensions for Bridge

Similar Messages

Maybe you are looking for