HTMLDB 1.6 - 'Create Application' button results in Error

Hi,
I've downloaded and installed HTMLDB 1.6 from OTN and have followed the instructions from the OBE tutorial. After fighting with the dads.conf file and the HTTP server, I've managed to log in and complete the tutorial.
The problem I now have is that whenever I click on 'Create Application' in the OBE workspace, I get another page which says:
Error ERR-1014 Application not found.
application=4000 workspace=10
Also, Enterprise Manager reports that there are 23 invalid objects in the FLOWS_010600 schema,6 invalid objects in the FLOWS_FILES schema, and 6 invalid objects in the PUBLIC schema.
Much help would be appreciated.
Thanks
Bal

Hi Sergio,
Thank you for responding. I am running HTMLDB 1.6 on 10g(10.1.0.3.0) on Suse 9.1 I suspect the installation is at fault, therefore I am re-installing it. I'll keep you posted on my progress.
Thanks,
Bal

Similar Messages

The last Button results outOfMemory error

If I drop a view object which is created on a many rows table as form(read-only or input) and as navagation buttons on a jsp ,the last button always results a outOfMemory error .How can I solve it?
Thank u very much.

Check out Steve's article:
http://radio.weblogs.com/0118231/stories/2003/03/26/viewObjectTuningTipsForBestPerformance.html
Thanks.
Sung

Attempt to create a transformation results in error "transf. does not exist

Hello,
We're using BI 7.0 in my dept. I have a Data Store Object that I want to connect with a transformation to my DataSource. All objects are BI 7.0 objects, not 3.x. I right click my DataSource and select "create transformation" - as described in the BI documentation. I enter my DSO object as destination in the pop-up. As soon as I click on "execute" to confirm all entries in the pop-up, I get the error message "transformation does not exist, see long text". In the long text I find "The transformation specified by transformation ID , source and target , does not exist.". Well - of course my transformation doesn't exist yet, I wanted to create it! Does anyone share my unfortunate experience and found a way out?
Thanks for any tips you can give me! Annette

hi annette,
this is 1 of the possibility. i replicated the issue in my system and this is what i found out...
when you or whoever replicated the system (r/3 system connected with bw) he/she must have replicated the datasource as a 3x version and NOT as a 7x version. if that's the case, then you must have infosource inbetween (as 3x object you can't connect directly with datasource) and update rules (no transformation works). if that's what happened... then system will not allow you to create a transformation and will give you that error message. so please check if the datasource from r/3 got replicated properly (you have 2 options... replicate as 3x object OR replicate as datasource object 7x)
hope this helps...
regards,
sameer

Is there a way to create a button that links to a website?

Is there a way to create a button that links to a website?
I was reading up that it's possible to this with menus, and tracks but can you do it with a button and how?
I am hoping to create a button that people viewing my discs on a computer can click on the link and their web browser will pop up and take them to a website.
Any help is appreciated.
Thanks.
-Fraky

dvd@ccess questions are being asked once a week on this forum, so I'll repeat why it's useless:
- Mac users have to enable the feature in the preferences of DVD Player in order to for the links to work.
- PC users have to install a small application on their PC, and they have to reboot the PC in order for the links to work.
- On top of this, it's still unreliable, and may not work on some computers.
It's a dog: Don't use it.

Help trying to create a button in safari please.

trying to create a button that runs an applescript. I have been discussing it in 101 but cross posting it here because it's not getting much interest over there.
Any help would be nice. I have read Become an xCoder and it doesn't seem to answer my questions.
http://discussions.apple.com/thread.jspa?threadID=1514799&tstart=0

Is there no way to create an appcontroller that works like an applescript? Or get an applescript to be recognized so a new NSButton added to the Bookmark bar be activated?
i.e.
*tell application "System Events"*
* tell application "Safari" to activate*
* keystroke "n" using {command down}*
* delay 0.1*
* keystroke "l" using {command down, shift down}*
*end tell*
Or,
_Something Like:_
/ AppController /
*#import <Cocoa/Cocoa.h>*
*@interface AppController : NSObject*
*IBOutlet id NSButton;*
*-(IBAction) autoFill:,delay 0.1,checkSpelling:(id)sender*
@end
I really don't know if that AppController looks anything like it should or if it's even close.

How to create text buttons that link to video?

I've finally gotten around to trying DVD SP, and even though I read the whole manual, it's not at all clear if, or how, you can create text buttons that link to the video you want to play, without displaying a clip of that video in the button itself.
I have no problem creating a text button, but I can't change the font, and editing is counter-intuitive, unlike iDVD. I'd use iDVD, but it doesn't accept .m2v files, and it seems to think that my 6 videos of about 43 minutes each are too large for a DVD+DL disc, so it won't let me burn it or save it as a disc image.
Does anyone have a way out of this conundrum, or am I SOL?
Mulder

It really isn't that hard!
As Drew said, go into your menu and click and drag to create a button rectangle. With the button highlighted, look in the property inspector at the bottom and type in the text that you want to use. Ensure that you 'include in button highlight' and then set the colour choice for selected and activated.
What you get is a simple line of text which illuminates when you roll over it, and changes colour when you click on it.
Once that is done, click on the button area again and set the target to go to the piece of video that you want to have play back.
You should also set the menu call and end jump on that track to make sure your viewer can get back to the menu.
Once that is done the menu will show as a simple piece of text (more buttons means more bits of text, and the first button will be highlighted by default) and no video will play until the button is activated.
DVDSP is definitely a steeper learning curve than iDVD but for very good reasons. You get far greater control and access to far more advanced features in DVDSP. This means that some things will seem harder, whereas in fact they are just different and the process for achieving the result you want is different. Much of what you want to know is in the manual and also in the tutorials which came with the app. Failing that there are several good online spaces where you can find a lot more information... not least of which is right here, of course!

Can I use stylesheets to create multiple button styles?

I am trying to create a custom look-and-feel within UIX to get it as close as possible to
our existing application's look-and-feel.
As part of this, I customized the UIX button by overriding the following named style:
ButtonServerText
and also by providing my own icons for:
buttonStart
buttonEnd
buttonTopBackground
buttonBottomBackground
The good news is that I was able to get the button component to look exactly like our existing
application buttons.
The bad news is that we have different types of buttons in our application
for different purposes. (i.e. the image used for the button can be completely different based on the context e.g.
yellow button for important actions and light-blue buttons for secondary actions)
It seems like there is no way in which I can use this stylesheet mechanism to create different types of buttons
and use them within my application. (sometimes different types of buttons can appear on the same page)
Please let me know if there is a way.
This is in fact a general question regarding overriding a stylesheet for customizing look-and-feel.
Lets say I customize the "contentContainer" component using the stylesheet. This change would then be global.
But I do want to have different types of contentContainers in the application. I would be forced to create my own custom
UIX elements similar to contentContainer and write my own renderers.
(I know contentContainer does have the light, medium and dark styles. I used this just as an example.)
Please let me know what my options are.
Thanks,
Jayesh Kapoor

Hi Jayesh -
The good news is that I was able to get the button
component to look exactly like our existing
application buttons.Cool - I'm glad to hear you were able to get this working!
The bad news is that we have different types of
buttons in our applicationRight. This is a fundamental limitation of our look and feel customization functionality - we only support global customizations, not instance-specific customizations. I agree that there are many cases where instance-level customization would be useful, but this just instance supported yet.
The only solution that I can think of for your button dilemma would be to use static images. It's pretty easy to wire up an image to behave like a button - just embed the image in a link and use <fireAction> as the link's primaryClientAction.
Obviously, the downside of this approach is that you need to create the button images manually - which also isn't ideal if you are planning to translate your applications. One possible solution here might be to use UIX to pre-generate your button images. The idea would be to create custom LAFs for each style of button, then create a UIX page for each button style, including <button> instances for each translated value. Then, you could configure UIX to run in the desired look and feel, hit the corresponding page, and UIX will generate the required buttons into your image cache. Again, not ideal, but this might be easier than creating the buttons by hand.
This is in fact a general question regarding
overriding a stylesheet for customizing
look-and-feel.
Lets say I customize the "contentContainer" component
using the stylesheet. This change would then be
global.
But I do want to have different types of
contentContainers in the application. I would be
forced to create my own custom
UIX elements similar to contentContainer and write my
own renderers.Right - this is a generic problem. But for some components, like content containers, an easier solution might be to leverage UIX's templating mechanism. Remember, you can embed arbitrary HTML contents in a UIX page/template by setting the namespace to "http://www.w3.org/TR/REC-html40". You can then reference these templates from your other UIX contents as if they were in fact UIX components. I'd recommend that you explore UIX's template support to see if this will meet your needs.
Andy

How can i create a button with richText display instead of label

Hi All,
I'm trying to create a button that will look exactly as the regular spark button but will have more than one color in his label (Like attached 'buttonPic.jpg')
I have tried to create a new button skin and new button component that will replace the label text and will to the job, but still it looks like the button original class overides the richText definitions. (Code attached)
Maybe there is other solution?
This is my extra code in the MyButtonSkin
 
 
 <s:Label id="labelDisplay"
 visible="false">
 </s:Label>
 <s:RichText id="exLabelDisplay"
 color="0x900000"
 textFlow="{TextConverter.importToFlow(htmlTextAsHTML, TextConverter.TEXT_FIELD_HTML_FORMAT)}"
 left="7" right="7" top="2" bottom="2">
 </s:RichText>
 <fx:Declarations>
 <fx:String id="htmlTextAsHTML"><![CDATA[0+]]></fx:String>
 </fx:Declarations>

Hi mewk,
probably it was a catch due to eyes that actually got a bit of sleep
anyway small test app
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/halo" minWidth="1024" minHeight="768">
<fx:Script>
<![CDATA[
protected function updateBtn_clickHandler(event:MouseEvent):void
richbtn.label=mytext.text;
]]>
</fx:Script>
<s:Button id="richbtn" x="69" y="58" width="169" height="83" skinClass="ButtonSkin1" label="hellogoodbye"/>
<s:Button x="70" y="333" label="Update rich button" id="updateBtn" click="updateBtn_clickHandler(event)"/>
<s:TextArea x="69" y="174" id="mytext" text="hellobold"/>
</s:Application>
and a skin with minimal change
<?xml version="1.0" encoding="utf-8"?>
<s:SparkSkin xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:fb="http://ns.adobe.com/flashbuilder/2009" minWidth="21" minHeight="21" alpha.disabled="0.5">
 <fx:Metadata>
 <![CDATA[
 [HostComponent("spark.components.Button")]
 ]]>
 </fx:Metadata>
 <fx:Script fb:purpose="styling">
 <![CDATA[
import flashx.textLayout.conversion.TextConverter;
 static private const exclusions:Array = ["labelDisplay"];
override public function get colorizeExclusions():Array {return exclusions;}
 override protected function initializationComplete():void
 useBaseColor = true;
 super.initializationComplete();
override protected function updateDisplayList(unscaledWidth:Number, unscaledHeight:Number) : void
 var cr:Number = getStyle("cornerRadius");
 if (cornerRadius != cr)
 cornerRadius = cr;
 shadow.radiusX = cornerRadius;
 fill.radiusX = cornerRadius;
 lowlight.radiusX = cornerRadius;
 highlight.radiusX = cornerRadius;
 border.radiusX = cornerRadius;
 if (highlightStroke) highlightStroke.radiusX = cornerRadius;
 super.updateDisplayList(unscaledWidth, unscaledHeight);
 private var cornerRadius:Number = 2;
 ]]>
 </fx:Script>
 
 <s:states>
 <s:State name="up" />
 <s:State name="over" />
 <s:State name="down" />
 <s:State name="disabled" />
 </s:states>
 
 <s:Rect id="shadow" left="-1" right="-1" top="-1" bottom="-1" radiusX="2">
 <s:fill>
 <s:LinearGradient rotation="90">
 <s:GradientEntry color="0x000000"
 color.down="0xFFFFFF"
 alpha="0.01"
 alpha.down="0" />
 <s:GradientEntry color="0x000000"
 color.down="0xFFFFFF"
 alpha="0.07"
 alpha.down="0.5" />
 </s:LinearGradient>
 </s:fill>
 </s:Rect>
 
 <s:Rect id="fill" left="1" right="1" top="1" bottom="1" radiusX="2">
 <s:fill>
 <s:LinearGradient rotation="90">
 <s:GradientEntry color="0xFFFFFF"
 color.over="0xBBBDBD"
 color.down="0xAAAAAA"
 alpha="0.85" />
 <s:GradientEntry color="0xD8D8D8"
 color.over="0x9FA0A1"
 color.down="0x929496"
 alpha="0.85" />
 </s:LinearGradient>
 </s:fill>
 </s:Rect>
 
 <s:Rect id="lowlight" left="1" right="1" bottom="1" height="9" radiusX="2">
 <s:fill>
 <s:LinearGradient rotation="90">
 <s:GradientEntry color="0x000000" alpha="0.0099" />
 <s:GradientEntry color="0x000000" alpha="0.0627" />
 </s:LinearGradient>
 </s:fill>
 </s:Rect>
 
 <s:Rect id="highlight" left="1" right="1" top="1" height="9" radiusX="2">
 <s:fill>
 <s:SolidColor color="0xFFFFFF"
 alpha="0.33"
 alpha.over="0.22"
 alpha.down="0.12" />
 </s:fill>
 </s:Rect>
 
 <s:Rect id="highlightStroke" left="1" right="1" top="1" bottom="1" radiusX="2" excludeFrom="down">
 <s:stroke>
 <s:LinearGradientStroke rotation="90" weight="1">
 <s:GradientEntry color="0xFFFFFF" alpha.over="0.22" />
 <s:GradientEntry color="0xD8D8D8" alpha.over="0.22" />
 </s:LinearGradientStroke>
 </s:stroke>
 </s:Rect>
 
 <s:Rect left="1" top="1" bottom="1" width="1" includeIn="down">
 <s:fill>
 <s:SolidColor color="0x000000" alpha="0.07" />
 </s:fill>
 </s:Rect>
 <s:Rect right="1" top="1" bottom="1" width="1" includeIn="down">
 <s:fill>
 <s:SolidColor color="0x000000" alpha="0.07" />
 </s:fill>
 </s:Rect>
 <s:Rect left="2" top="1" right="2" height="1" includeIn="down">
 <s:fill>
 <s:SolidColor color="0x000000" alpha="0.25" />
 </s:fill>
 </s:Rect>
 <s:Rect left="1" top="2" right="1" height="1" includeIn="down">
 <s:fill>
 <s:SolidColor color="0x000000" alpha="0.09" />
 </s:fill>
 </s:Rect>
 
 <s:Rect id="border" left="0" right="0" top="0" bottom="0" width="69" height="20" radiusX="2">
 <s:stroke>
 <s:LinearGradientStroke rotation="90" weight="1">
 <s:GradientEntry color="0x000000"
 alpha="0.5625"
 alpha.down="0.6375" />
 <s:GradientEntry color="0x000000"
 alpha="0.75"
 alpha.down="0.85" />
 </s:LinearGradientStroke>
 </s:stroke>
 </s:Rect>
 
<s:RichText id="LabelDisplay"
color="0x900000"
textFlow="{TextConverter.importToFlow(hostComponent.label, TextConverter.TEXT_FIELD_HTML_FORMAT)}"
left="7" right="7" top="2" bottom="2">
</s:RichText>
</s:SparkSkin>

How to create SAVE button in Workbook using BI IP Functionality

Hi All,
I have Real-time Infocube (ZCUBSDID) with me. Planning has been done on the cube using BI-IP (like Aggregation level, filter, planning function and planning sequence are present there).
As an Input i have everything in Quality system like I can access query in Bex Anlyzer (Input Ready Query) and also i have workbook associated with the query. SAVE button is also present on workbook which is giving result based on fiscal year and version.
Now my task is to create workbook on Development system with the same functionality as Quality System.
I have same Query available on DEV system also. I created new Workbook but SAVE button is not available in my workbook.
Can anyone suggest how to create SAVE button in my new workbook.
I am new in IP side so please let me know if i can get any help from workbook which is already present in Quality system.
Which type of analysis i should do to come out with solution.....otherwise let me know step by step procedure to create SAVE button on workbook using BI-IP functionality.
It will be great help. My advance thanks goes to you people.
Thanks,
Rupali Singh

Check points 19 & 20 on this link http://help.sap.com/saphelp_nw2004s/helpdata/en/43/a033e0f56e21b5e10000000a1553f6/frameset.htm.
Command to be called on SAVE button is SAVE_AREA as explained in the point 20.
Regards,
Deepti

Error when create application - apex 4.0

hi all,
i have problem when create new project in apex.
my step to create project :
1. in oracle from i create simple form ,in form just textA - textB and button arithmetic.
2. in command prompt, i'm type iff2xml90 (form_name)
3. run apex like http://localhost:8080/apex/ and login
4. i'm click Application Builder icon
5. click Migration on the right side of the page
6. on the Application Migration page, i'm click Create Project
7. i'm enter thr project detail and upload Forms Module XML File (i'm made in point 1)
8. project successful i'm created
9. i'm create Application and show Generate Application and enter the detail,next
but in point 9 have error when i'm Create Application.
the error is _"1 error has occurred * The project, "Penjumlahan" does not contain any Blocks associated with database objects."_
how fix the problem?
thx :):):)

Hi Beny,
I think it would be better to post this question to another forum: {forum:id=137}
Thanks,
Udo
P.S.: Please mark this thread as answered anyway.

How to create command button called 'Remarks' and Check box in ALV GRID?

Hi, Experts,
Requirement is: in the ALVE GRID report output, user select a record by clicking the check box and pressing the button 'Remarks' it will take me into other transaction from the output list.
Please help me out.
Reward points.
Sekhar

Hi Chandra Shekar,
Check the following sample program. 2 things to remember.
1. Check the callback subroutine PF_STATUS_SET and create PF status for the program.and also ur REMARKS button in the application tool. Comments are made every where wherever those are needed. After creating Pf status execute the report.
2.Once you select records by selecting checkboxes, u have to press on Refresh button( that is there on application toolbar), then only for selected records, CHECK field in the internal is updated. After that press on REMARKS button .
REPORT zvenkat_alv_grid.
TABLES:t001.
"Types
TYPES:
 BEGIN OF t_1001,
 check TYPE c,
 bukrs TYPE t001-bukrs,
 butxt TYPE t001-butxt,
 ort01 TYPE t001-ort01,
 land1 TYPE t001-land1,
 END OF t_1001.
"Work area
DATA:
 w_t001 TYPE t_1001.
"Internal table
DATA:
 i_t001 TYPE STANDARD TABLE OF t_1001.
" ALV Declarations
* Types Pools
TYPE-POOLS:
 slis.
* Types
TYPES:
 t_fieldcat TYPE slis_fieldcat_alv,
 t_events TYPE slis_alv_event,
 t_layout TYPE slis_layout_alv.
* Workareas
DATA:
 w_fieldcat TYPE t_fieldcat,
 w_events TYPE t_events,
 w_layout TYPE t_layout.
* Internal Tables
DATA:
 i_fieldcat TYPE STANDARD TABLE OF t_fieldcat,
 i_events TYPE STANDARD TABLE OF t_events.
*& start of selection
START-OF-SELECTION.
 PERFORM get_data.
*& end-of-selection.
END-OF-SELECTION.
 PERFORM build_fieldcatlog.
 PERFORM build_events.
 PERFORM build_layout.
 PERFORM list_display.
*& Form get_data
FORM get_data .
 SELECT bukrs
 butxt
 ort01
 land1
 FROM t001
 INTO CORRESPONDING FIELDS OF TABLE i_t001
 UP TO 30 ROWS.
ENDFORM. " get_data
*& Form build_fieldcatlog
FORM build_fieldcatlog .
 CLEAR:w_fieldcat,i_fieldcat[].
 PERFORM build_fcatalog USING:
 'CHECK' 'I_T001' ' ',
 'BUKRS' 'I_T001' 'BUKRS',
 'BUTXT' 'I_T001' 'BUTXT',
 'ORT01' 'I_T001' 'ORT01',
 'LAND1' 'I_T001' 'LAND1'.
ENDFORM. "BUILD_FIELDCATLOG
*& Form BUILD_FCATALOG
FORM build_fcatalog USING l_field l_tab l_text.
 w_fieldcat-fieldname = l_field.
 w_fieldcat-tabname = l_tab.
 w_fieldcat-seltext_m = l_text.
 IF l_field = 'CHECK'..
 w_fieldcat-checkbox = 'X'.
 w_fieldcat-edit = 'X'.
 ENDIF.
 APPEND w_fieldcat TO i_fieldcat.
 CLEAR w_fieldcat.
ENDFORM. " build_fieldcatlog
*& Form build_events
* text
FORM build_events.
 CLEAR :
 w_events, i_events[].
 w_events-name = 'TOP_OF_PAGE'."Event Name
 w_events-form = 'TOP_OF_PAGE'."Callback event subroutine
 APPEND w_events TO i_events.
 CLEAR w_events.
 w_events-name = 'USER_COMMAND' .
 w_events-form = 'USER_COMMAND' .
 APPEND w_events TO i_events.
 CLEAR w_events.
 w_events-name = 'PF_STATUS_SET' .
 w_events-form = 'PF_STATUS_SET' .
 APPEND w_events TO i_events.
 CLEAR w_events.
ENDFORM. "build_events
*& Form build_layout
FORM build_layout .
 w_layout-colwidth_optimize = 'X'.
 w_layout-zebra = 'X'.
ENDFORM. " build_layout
*& Form list_display
FORM list_display .
 DATA:
 l_program TYPE sy-repid.
 l_program = sy-repid.
 CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = l_program
 is_layout = w_layout
 it_fieldcat = i_fieldcat
 it_events = i_events
 TABLES
 t_outtab = i_t001
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDFORM. " list_display
*& Form top_of_page
FORM top_of_page.
 DATA :
 li_header TYPE slis_t_listheader,
 w_header LIKE LINE OF li_header.
 DATA:
 l_date TYPE char10.
 WRITE sy-datum TO l_date.
 w_header-typ = 'H'.
 CONCATENATE sy-repid ':' 'From Date' l_date INTO w_header-info SEPARATED BY space.
 APPEND w_header TO li_header.
 CLEAR w_header.
 w_header-typ = 'S'.
 w_header-info = sy-title.
 APPEND w_header TO li_header.
 CLEAR w_header.
 w_header-typ = 'A'.
 w_header-info = sy-uname.
 APPEND w_header TO li_header.
 CLEAR w_header.
 CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = li_header.
ENDFORM. "top_of_page
*& Form pf_status_set
FORM pf_status_set USING extab TYPE slis_t_extab.
 "Procedure to set own pf-status.
 "1.Goto Transaction code SE41
 "2.give program = SAPLKKBL and status = STANDARD_FULLSCREEN.
 "3.Click on Application toolbar STATUS button
 "4.Give ur program name Status name that is to be used in the program using SET pf-status statement
 "5.Create ur button REMARKS.
 SET PF-STATUS 'STATUS1' EXCLUDING extab.
ENDFORM. "pf_status_set
*& Form user_command
FORM user_command USING ucomm LIKE sy-ucomm
 selfield TYPE slis_selfield.
 CASE ucomm .
 WHEN 'REMARKS'."When u click on remarks button.
 LOOP AT i_t001 INTO w_t001 WHERE check = 'X'.
 WRITE :/ w_t001-bukrs, 'Checked'.
 ENDLOOP.
 ENDCASE.
ENDFORM. "user_command
I hope that it helps u .
Regards,
Venkat.O

How do you enable 'Create Content' button on 'Add Content' page?

How do you enable ‘Create Content’ button on ‘Add Content’ page?
There is new functionality to a ‘Layout’ type personalization page like ‘Sales Dashboard’.
Bug 4503123 INCONSISTENT WAY OF ADDING USER-DEFINED REGIONS ON WYSIWYG PAGE:
There’s no way to add custom content to a configurable page.
Add a “Create Content” button and let the user create a piece of content that extends to a region he creates.
It says: Fixed->11.5.10.3CU
In Oracle® Application Framework Personalization Guide Release 11i Part No. B25439-02 it says:
p 4-5
If you personalize a non-configurable page (a page that does not have the necessary metadata to personalize its layout) or when you run your application in Accessibility mode (profile option Self Service Accessibility Features (ICX_ACCESSIBILITY_FEATURES) is set to Standard Accessibility), you will not see the Page Layout Personalization page, as shown below. Instead, you will see the Page Hierarchy Personalization page, page 4-12, where you can perform the same personalization functions, using a descriptive tabular user interface.
It tried this and can’t get it to display.
Has anyone run accross this before?

user587952,
Can you describe your issue in detail forgetting those references for the time being. What exactly are you trying to do?
Check this from the dev guide:
In order to be able to take full advantage of page layout personalization capabilities, it is important when you create your configurable page, to use flexibleLayout and flexibleContent regions at all levels when you create the page hierarchy structure under your page layout region. In Oracle Applications, this is required, as it is the coding standard.
--Shiv

Hyperlink text not complete when using Create PDF button in Word

Hello -
I have Adobe Professional 9, and Microsoft office 2007. I'm trying to convert a word doc to a pdf using the Create PDF button but the resulting pdf always has incomplete hyperlinks. For instance, where it should say http://www.adobe.com, the output pdf will have : //www.adobe.com
When I hover over the link, the pop up label has the entire URL, and the links work, but I want the entire text to show. I've tried doing a repair with the install disc for adobe, but that didn't help. I've already checked the settings to ensure the Add Hyperlinks option is checked. I just did a complete uninstall/reinstall of all my Microsoft Office products and installed the service pack. I don't have this problem when I use the Create PDF button on my desktop computer, only when I use my laptop (Dell M4300). Any other suggestions?

I don't have my WORD 2007 on this machine. However, are you sure you are using the Adobe product and not the MS feature for creating the PDF? As for using PDF Maker, you should check the options/preferences in the Adobe menu. There should be a check box for conversion of links. Of course there is the question about whether the links are actually correct in WORD. The links only being partial is typical of the links not actually being transferred to the PDF, but simply Acrobat completing the link it thinks exists like WORD does.

Can't create Application Role in Obiee 11g Enterprise Manager

Hi All,
I was working on obiee11g enterprise manager. I created some of the groups in weblogic console. Now I wanted to create application roles in enterprise manager for those groups. I am surprised that, the "*Create*" button is inactive on the application role page of enterprise manager. I only i could see tthe actives ones "*Create Like*", "*Edit*" and "*Delete*".
Please assist shoud I need any additional configuration for the same.urgent!!
Thank you in advance,
BK.

Click on Create Like button
Then click cancel on the Create Like dialog box
Go back to the Create button, it now works
But if you log out and log back in, the Create button is disabled again
so may repeat the above process of accessing the 'Create Like' button first to enable the Create button
< Bug:13983399> CREATE BUTTON IS DISABLED IN FUSION MIDDLEWARE CONTROL IN OBIEE 11.1.1.6.0 ENV
Please mark helpful or correct if answered.
Thanks,
- A.Y

How to create a button with the drop-down menu?

I want to create a button with the drop-down menu, which is like the 'back' on the tollbar in IE. I heard JPopupMenu can reach the certain result, but the button hadn't a down arrow. Who can help me?

i have made something like this :
//======================================================================
package com.ju.guiutils
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.util.Vector;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.plaf.basic.BasicComboBoxUI;
* @version 1.0 14/04/02
* @author Syed Arshad Ali [email protected] 
* Usage : ButtonsCombo basically performs function button + JComboBox, if we have different options for
* same button then we can use this ButtonsCombo.
* By the way there is no button at all in ButtonsCombo
public class ButtonsCombo extends JComboBox {
//===================================================================================
* Create ButtonsCombo with default combobox model
public ButtonsCombo () {
super ();
init ();
//===================================================================================
* Creates a ButtonsCombo that takes it's items from an existing ComboBoxModel.
public ButtonsCombo ( ComboBoxModel model ) {
super ( model );
init ();
//===================================================================================
* Creates a ButtonsCombo that contains the elements in the specified array.
public ButtonsCombo ( Object [] items ) {
super ( items );
init ();
//===================================================================================
* Creates a ButtonsCombo that contains the elements in the specified Vector.
public ButtonsCombo ( Vector items ) {
super ( items );
init ();
//===================================================================================
private void init () {
setBorder ( BorderFactory.createBevelBorder ( BevelBorder.RAISED ) );
setRenderer ( new ComboRenderer() );
setUI ( new ComboUI() );
addMouseListener ( new ComboMouseListener() );
//===================================================================================
* Set items for ButtonsCombo in the specified array
public void setItems ( Object [] items ) {
setModel ( new DefaultComboBoxModel( items ) );
//```````````````````````````````````````````````````````````````````````````````````
* Set items for ButtonsCombo in the specified Vector
public void setItems ( Vector items ) {
setModel ( new DefaultComboBoxModel( items ) );
//```````````````````````````````````````````````````````````````````````````````````
* Get current items in a array
public Object [] getItemsArray () {
ComboBoxModel model = this.getModel ();
if ( model != null ) {
int size = model.getSize ();
if ( size > 0 ) {
Object [] items = new Object[ size ];
for ( int i = 0; i < size; i++ ) {
items[ i ] = model.getElementAt ( i );
return items;
return null;
//```````````````````````````````````````````````````````````````````````````````````
* Get current items in a Vector
public Vector getItemsVector () {
ComboBoxModel model = this.getModel ();
if ( model != null ) {
int size = model.getSize ();
if ( size > 0 ) {
Vector itemsVec = new Vector();
for ( int i = 0; i < size; i++ ) {
itemsVec.addElement ( model.getElementAt ( i ) );
return itemsVec;
return null;
//===================================================================================
class ComboMouseListener extends MouseAdapter {
public void mouseClicked ( MouseEvent me ) {
ButtonsCombo.this.hidePopup ();
public void mousePressed ( MouseEvent me ) {
ButtonsCombo.this.hidePopup ();
ButtonsCombo.this.setBorder ( BorderFactory.createBevelBorder ( BevelBorder.LOWERED ) );
public void mouseReleased ( MouseEvent me ) {
ButtonsCombo.this.hidePopup ();
ButtonsCombo.this.setBorder ( BorderFactory.createBevelBorder ( BevelBorder.RAISED ) );
//===================================================================================
class ComboRenderer extends JLabel implements ListCellRenderer {
//````````````````````````````````````````````````
public ComboRenderer () {
setOpaque ( true );
//````````````````````````````````````````````````
public Component getListCellRendererComponent ( JList list, Object value, int index, boolean isSelected, boolean cellHasFocus ) {
setBackground ( isSelected ? Color.cyan : Color.white );
setForeground ( isSelected ? Color.red : Color.black );
setText ( ( String )value );
return this;
//````````````````````````````````````````````````
//===================================================================================
// We have to use this class, otherwise we cannot stop JComboBox's popup to go down
class ComboUI extends BasicComboBoxUI {
public JButton createArrowButton () throws NullPointerException {
try {
URL url = getClass ().getResource ( "/images/comboarrow.gif" );
JButton b = new JButton( new ImageIcon( url ) );
b.addActionListener ( new ActionListener() {
public void actionPerformed ( ActionEvent ae ) {
return b;
} catch ( NullPointerException npe ) {
throw new NullPointerException( "/images/comboarrow.gif not found or /images folder not in classpath" );
catch ( Exception e ) {
e.printStackTrace ();
return null;
//======================================================================
you can cutomize this according to your requirement , okie ;)

HTMLDB 1.6 - 'Create Application' button results in Error

Similar Messages

Maybe you are looking for