The last Button results outOfMemory error

If I drop a view object which is created on a many rows table as form(read-only or input) and as navagation buttons on a jsp ,the last button always results a outOfMemory error .How can I solve it?
Thank u very much.

Check out Steve's article:
http://radio.weblogs.com/0118231/stories/2003/03/26/viewObjectTuningTipsForBestPerformance.html
Thanks.
Sung

Similar Messages

Unable to switch between tuners on HD DVR. The `Last' button doesn't do it.

FiOs was installed yesterday and I was disappointed to learn that the remote won't swap tuners, allowing me to watch a program on one tuner and then watch another on the second tuner. Spent time on the phone with the tech reps, but they didn't seem to understand the problem. They thought the `Last' button served the purposed. It doesn't. I switched from Comcast, which offered that feature. The Comcast remote has a 'Last' button and a 'Swap' button. The 'Swap' button is missing from the Verizon/Philips remote. Here's the difference: If I'm watching Channels 10 and 20 with either service, the 'Last' button switches between those channels. The tuner doesn't change. The 'Swap' function on the Comcast remote switches the DVR to Tuner 2, where I can select other channels. If I'm watching Channel 10 on Tuner 1 and then press the `Swap' key, the television doesn't switch to Channel 20 as it would with the `Last' key, It switches to whatever channel I'm watching on Tuner 2. An easy way to test this is to press the rewind key. As I'm watching Tuner 1, whatever is playing on Tuner 2 is buffered for 5 or 10 minutes or longer. When I switch on the Comcast service, I can rewind and see what I missed on either tuner. The `Last' key doesn't do this on either service. The Verizon sales people assured me this feature was available with FiOs. It's not so far. Hoping there will be a software upgrade. The `Swap' key is wonderful.

missingtivo and oldsarge, dont feel bad about it not working. it doesnt work for a lot of people. According to the Verizon info that was originally posted on the web site, it said that the Verizon DVR's did not have two live buffers. Now the new info on the page says nothing about it one way or the other. Hence all the confusion between those of us that say they cannot switch buffers and those that say you can. The problem is that there is no way to tell which DVR's can and which cannot, and Verizon has said that it is NOT a feature and it is NOT supported. That having been said, many like Justin get it to work just fine. Since it works for them, it is assumed that it will work for everyone. Unfortunately, this is not true. While a lot of people do have this work for them, there are many of us that it does not work at all and it is not something that Verizon considers as an issue. When I asked for mine to be replaced because it does not work, I was told that it is not an advertised feature and not one guaranteed to work, therefore their "official" word on the subject is that the dual live tuners is not a feature on the Verizon service. If it works for you...Great more power to you. If it doesn't... OH WELL, its not a feature anyway. I've tried both the 7216 and the 6416, and my neighbors 6416 and it does not work on any of them.
For those that may be reading this after our long discussion on the other thread, an update. Since we were unable to get mine to work. Even following the directions provided by everyone here on the board that said it worked perfectly. I contacted Verizon Tech support and was informed about the "not a supported option" that I posted above. That is why I said it in the way that I did. This was the "official" word from the tech support supervisor. And my buddy that works at Verizon Tech support says that they have been told to tell customers that the "dual live tuners" is not a feature of Verizon. That's why you have so much problems finding someone when you call for help on this issue. Just FYI
However, the new Cisco stb's that are supposed to be out sometime around the first of the year are supposedly to have many of these features that we want out of Verizon now. We will just have to wait and see.
====================================================================================
Error exists between keyboard and chair.

[Solved] Keep the last button pressed with a custom style

Hello,
I have a VBox with 20 buttons and I have this style applied (menu.css) (only for VBox wrapper):
.button:focused {
    -fx-background-color: #0768A9;
    -fx-text-fill: #FFFFFF;
But when I pressed other button outside the VBox the style disappears, because the other button get the focus.
I'm afraid I'm taking the wrong way.
How I can do to keep the last button pressed with a custom style? (Only for buttons containing the VBox).
Best regards

I created a simple method to change background colors in buttons:
    private void setSelectedBtnStyle(Button bboat) {
// Change style oldSelectedBoat
    selectedBoat.setStyle("-fx-background-color: white;-fx-text-fill: black;");
    // oldSelectedBoat var change to newSelectedBoat
    this.selectedBoat = bboat;
// Change style newSelectedBoat
    selectedBoat.setStyle("-fx-background-color: #0768A9;-fx-text-fill: #FFFFFF;");;
Surely not the best solution, but it works for me.
Best regards.

Im trying to burn a lp from itunes, but it keeps cancelling at the last minute and saying error 4000

im trying to burn a lp from itunes, but it keeps cancelling at the last minute and saying error 4000

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
-Griff W.

Using LOV with Validation on the Numeric Fields results in Error

Dear JHeadstart Team,
During my work with lov I encountered another problem. I defined a lov and attached the lov to a numeric field and check the LOV for validation. Now when I use LOV using the LOV button it works fine but when I enter some numbers and then press tab the LOV was not shown correctly and resulted in the following errors and the worst thing is that you can not navigate to any other pages and all try to navigate to other pages results in errors too. When we put the same LOV on a string field (which is not desirable for us) it worked fine.
It seems to me like a bug. Am I right? Is ther any solution or workaround for this problem?
Thanks in advance,
Navid
16:31:29 DEBUG (LovItemBean) -Cleared value of item HrTrainingCourseSchedulesTitle
16:31:29 DEBUG (LovItemBean) -Cleared value binding #{bindings.HrTrainingCourseSchedulesTitle.inputValue} of item HrTrainingCourseSchedulesTitle
16:31:29 ERROR (ApplyRequestValuesPhase) -java.lang.ClassCastException: java.lang.Long
javax.faces.el.EvaluationException: java.lang.ClassCastException: java.lang.Long
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130)
     at oracle.adf.view.faces.component.UIXComponentBase.__broadcast(UIXComponentBase.java:1079)
     at oracle.adf.view.faces.component.UIXEditableValue.broadcast(UIXEditableValue.java:247)
     at oracle.adf.view.faces.component.UIXSelectInput.broadcast(UIXSelectInput.java:215)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:249)
     at javax.faces.component.UIViewRoot.processDecodes(UIViewRoot.java:307)
     at com.sun.faces.lifecycle.ApplyRequestValuesPhase.execute(ApplyRequestValuesPhase.java:79)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at com.pooya.controller.jsf.PooyaAuthenticationFilter.doFilter(PooyaAuthenticationFilter.java:256)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: java.lang.Long
     at oracle.jheadstart.controller.jsf.bean.LovItemBean.validateWithLov(LovItemBean.java:101)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
     ... 31 more

Hi Navid,
We ran into the same bug and have the next workaround for it:
We extended the JHeadstart class 'LovItemBean' and we have overridden the method 'validateWithLov(...)' with:
public void validateWithLov(ValueChangeEvent valueChangeEvent)
    Object newValue = valueChangeEvent.getNewValue();
    if(newValue != null && !(newValue instanceof String))
      newValue = newValue.toString();
      ValueChangeEvent newEvent = new ValueChangeEvent(valueChangeEvent.getComponent(), valueChangeEvent.getOldValue(), newValue);
      newEvent.setPhaseId(valueChangeEvent.getPhaseId());
      super.validateWithLov(newEvent);
    else
      super.validateWithLov(valueChangeEvent);
}Next step is to use a custom template in your JHeaedstart Application Structure file for 'LOV_ITEM_BEAN'. In this custom template you should use your own class as 'managed-bean-class' instead of the default JHeadstart one.
Now you can safely generate LOV with validation of number fields.
Maybe something the JHeadstart can pcik up in the next release of JHeadstart :-)
Hope this helps.
Pascal

Whenever I try to install things the install button results in nothing

So it started with one program, then another, and today I decided to install Lion I get up to clicking the "install" button and nothing happens. It registers the click and thats it, nothing. I was used to saying stuff like this on windows but not on a mac, any ideas?

Do you mean you're trying to install applications, and when you click on the Install button, nothing happens at all? Not even an error message saying that you must be a system administrator to install the application(s)?
Usually, there are two ways to install applications on a Mac, depending on how system-wide their working preferences are going to be. Some will require you to enter your admin password, because they'll be available to all the users registered on your machine, and/or they'll install kernel extensions that will launch when the system boots up.
Other applications simply require that you drag-and-drop them in your Application folder to be installed. Are you sure you're not operating under a guest account?

My iPhone 4S will not update it will start and at the last hour it says error what can I do

Everytime I try and update my iPhone 4S to ios7 it will start to download and at the last hour it will say error update failed i have tried everyday for the last week

You either need to go somewhere with a MUCH stronger and faster WiFi signal or do the update using your computer and iTunes.
On my PC the download took 10 minutes,

HTMLDB 1.6 - 'Create Application' button results in Error

Hi,
I've downloaded and installed HTMLDB 1.6 from OTN and have followed the instructions from the OBE tutorial. After fighting with the dads.conf file and the HTTP server, I've managed to log in and complete the tutorial.
The problem I now have is that whenever I click on 'Create Application' in the OBE workspace, I get another page which says:
Error ERR-1014 Application not found.
application=4000 workspace=10
Also, Enterprise Manager reports that there are 23 invalid objects in the FLOWS_010600 schema,6 invalid objects in the FLOWS_FILES schema, and 6 invalid objects in the PUBLIC schema.
Much help would be appreciated.
Thanks
Bal

Hi Sergio,
Thank you for responding. I am running HTMLDB 1.6 on 10g(10.1.0.3.0) on Suse 9.1 I suspect the installation is at fault, therefore I am re-installing it. I'll keep you posted on my progress.
Thanks,
Bal

[CS3] Extending the Document Object Results an Error

I'm trying to extend the Document object:
Document.prototype.myOwnMethod = function() {
/* some code here */
but I'm getting a Document is undefined error in Illustrator CS3
I tried extending the Application object:
Application.prototype.myOwnMethod = function() {
but I don't get any error.
How can I resolve this?
Thanks in advance....
-- Jeff

very old post, but not answered.
PathItem.prototype.nick ="pfad"
will work if a single Path is initialized before:
var p =activeDoc.selection.. or something
,otherwise not
to solve this i create my own obj.:
function Pfad(obj){
this.nick = "bla";
this.ai = obj; // to store the original Obj
var p = new Pfad(pathItem);
//then :
p.nick;
p.ai.fillColor;
my question is: is this the best solution or could it be done better?
thank you
Chris

How can I set the highlighted button according to the last chapter viewed?

I have a main menu with four buttons, each one of which takes me to a different chapter of track 1. When I press the MENU button on the remote and return to the main menu, I would like for the highlighted button to be the one corresponding to the last chapter viewed. How can I do this?
Page 247 of the DVDSP manual says the following:
Highlight Condition: Provides an alternative method to the Default Button setting for determining which button to highlight. When Highlight Condition is set to Default, the Default Button setting supplies the button highlight setting. When Highlight Condition is set to one of its stream settings (audio, subtitle, camera angle), the number of the stream last played determines the button to highlight. This setting can be overridden by any element that jumps to this menu, based on its jump setting.
I know that SPRM 7 contains the value of the current chapter, so when returning to the main menu I would like to use SPRM 7 to set the Highlight Condition, but I don't see a way to do that, since the only options for Highlight Condition are audio stream, subtitle stream, and camera angle.

Ah. Pre-scripts.
I would do this by tracking the menu, certainly, but I'd do that by using a set of scripts not as prescripts. So, if your main menu is the start up item for the disc, create a script that reads:
mov GPRM0, 1
Jump main menu
and set that as the start up item instead. Now create a second script:
mov GPRM0, 2
Jump Menu2
and use both of these scripts on any button that goes to a menu. For example, on the Main Menu you'll have a button that links to menu2... point that button to script 2 instead of the menu itself. Similarly, on the chapter menu if you've got a button that takes you back to the main menu, point that button to the first script.
For your menu call script you can now do this:
mov GPRM1, SPRM8
div GPRM1, 1024
Jump Main menu \[GPRM1\] if (GPRM0 = 1)
Jump Menu2 \[GPRM1\] if (GPRM0 = 2)
This could also be the end jump script for both tracks, too.
Now, Main menu will have three buttons, one for track 1, one for track 2 and one to go to the second script. Track 1 menu call and end jump goes to the last script, track 2 does the same. On the chapter select menu you point each button to the relevant chapter in track 1 and let the scripts do their job whenever a menu call is made or the track ends. The script will see you were on Menu2 and send you there, and SPRM8 will get you back to the button you last selected.
If, instead of this, you want to go to the button that represents the last chapter played on the chapter menu, and not the last button pressed, but still be able to get to the last button on the main menu then the script changes a bit:
Goto 5 if (GPRM0 = 2)
mov GPRM1, SPRM8
div GPRM1, 1024
Jump Main menu \[GPRM1\]
mov GPRM1, SPRM7
Jump Menu2 \[GPRM1\]
This sends you to the button relevant to the last chapter played if you came from the chapter menu, by jumping through the script to the bit that deals with Menu2, else it will work out the last button selected (and we assume this must have been on the Main menu because GPRM0 !=2 in that case), and send you to the main menu with that button highlighted.
If you've got any more scripts than that running, you've got too many... and get rid of the pre-scripts - they are more trouble than not, and don't work if you are using GPRM based button jumps anyway.

Dynamic button change color on click and reset the unclicked buttons

Hi,
I have have 3 buttons created dynamically from JSON file.
When I click on any of them the color is changed to red. (this is good).
But when I am going to click another button the previous red that I have clicked earlier doesn't change to it's grey statement, except from the last button which is the only one that works (is changing between red and grey).
If for the JSON make variable for the index e.g.(0,1,2) is working, but I want to make it work without index it. I want to make it with symbol's attr.
here is the files if someone can give it a try.
Dropbox - hover.rar

At stageCreationComplete I have it as a function, but it doesn't work correct.
I want to know why.
The problem is that when I use getJSON, it creates the ChildSymbols and keeps in memory only the last record (index).
So, I believe that I need to count the indexes of the JSON files and store it perhaps.
What I mean.
My JSON structure:
{     "title" : "Central",
        "category": "",
    "image": "images/thumbs/models/central.png",
    "large": "auto-2f-kent-large/0.png",
        "frame": "frames-large/0.png",
         "jsonf": "auto2fk.json"
{     "title" : "Telescopic",
        "category": "",
    "image": "images/thumbs/models/telescopic.png",
    "large": "auto-2f-til-large/0.png",
        "frame": "frames-large/0.png",
         "jsonf": "auto2ft.json"
{     "title" : "Glass",
        "category": "",
    "image": "images/thumbs/models/glass.png",
    "large": "auto-glass-large/0.png",
        "frame": "frames-large/0.png",
         "jsonf": "autoglass.json"
it has 3 index. And on ChildSymbol I give the attr as .attr("id", item.title);
If I make index.length it will give me 3 as number.
But if I make item.title.length it will count the letters of its Word, the result will be (7,10,5).
How Can I make it to count the word itself an give me 3 as a result?

Solman_admin password changes results in errors during managed system setup

Hello all,
I am trying to get Solman 4.0 EHP 1 to work, but get numberous problems.
Currently I have 6 messages at SAP, but no solution yet.
Situation:
Solman 4.0
SAP_BASIS     701     0003
SAP_ABA     701     0003
ST-PI     2008_1_700     0000
PI_BASIS     701     0003
SAP_BW     701     0003
CRMUIF     500     0001
SAP_AP     700     0014
BBPCRM     500     0013
CPRXRPM     400     0014
BI_CONT     704     0002
ST     400     0019
ST-A/PI     01L_CRM570     0000
ST-ICO     150_700     0016
ST-SER     701_2008_2     0002
So, it is uptodate.
The problem:
Changing the solman_admin password results in errors during connecting a managed system.
In the inital setup the solman_admin is created with a pasword.
After the basic setup I setup some managed systems.
In the meantime I had to change the password of solman_admin
I am logged in with solman_admin and do solman_setup to setup the managed system.
During the setup a process tries to logon back to the solman using solman_admin and the incorrect password.
This is the logging:
Step SSO Details
Found SID for SSO ACL entry : MSD
Found login.ticket_client for SSO ACL entry : 000
The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (823 bytes)
A failure occured while connecting to ABAP stack on localhost sys=70 client=300 user=SOLMAN_ADMIN
!! Exception : Password logon no longer possible - too many failed attempts
A failure occured while importing ABAP SSO ticket certificate in ABAP stack
!! Exception : java.lang.NullPointerException
Java SSO ticket certificate of MSD was imported in ABAP PSE of kswv024.mob.local (client 300)
The Java SSO ticket certificate was successfully imported in ABAP System PSE, and the ACL updated accordingly (SID=MSD LoginTicketClient=000)
Anyone else has this problem?
gr
Sander

Just for clarification it's Solman 7.0 EHP1 correct?
Also you may want to unlock the following user:
localhost sys=70 client=300 user=SOLMAN_ADMIN
Then if you navigate (in solution manager) to TCode solman_workcenter -> "Root Cause Analysis" tab ->"Agent Administration" menu item on the left -> "Applications Configuration" tab -> under the Agent Applications - Configuration menu on the left select "com.sap.smd.agent.application.global.configuration" -> Change the "Scope" drop down in the frame to the right to the SMD agent that you are using for "localhost sys=70 client=300" -> Click the "edit" button to the right of the Scope drop down box -> now find the entry below that lists "SOLMAN_ADMIN" as the user and find the corresponding password entry and update it with the new password that you changed it to -> click save and try the managed setup again.
Hope this helps, please let me know and we can go from there.

Last Run Result Email Alert from Scheduled Task

Hi All,
Ive a newly require need to move 3 files from a local server to a remote server via FTP each evening.
Local server is a Server 2008 box.
I have setup WinSCP to transfer the files over successfully via a Scheduled Task
Now i need alerting!!
Ive setup the email function in Task Scheduler and it does send me an email but a pretty pointless one at that as it doesn't tell you the Last Run Result status code.
So all i know is the job has run but i don't know if with errors etc.
Each morning ill have to FTP to the remote server and manually check the time and date stamps myself to make sure the copy was successful.
Ive checked the event log and it writes an Event ID 201 to the Task Scheduler Event Log and that has all the info i need in the description, but i cant attach that event to my scheduled task as there are lots of 201's for all different scheduled tasks that
run that by the OS.
Anybody know how i can get the last Run Result in the body of the email or the subject line at least - so i know if it is a 0x0 the job has been successul and anything other than 0x0 that there has been a problem.
Any suggestions?
Thanks in advance.

Here is what a failed task looks like. Note the non-zero result code: EventID
203 / Level 'Error' / ResultCode=2147942667
Log Name: Microsoft-Windows-TaskScheduler/Operational
Source: Microsoft-Windows-TaskScheduler
Date: 10/26/2013 7:50:22 PM
Event ID: 203
Task Category: Action failed to start
Level: Error
Keywords:
User: SYSTEM
Computer: WTest
Description:
Task Scheduler failed to launch action "C:\Program Files\Acer Incorporated\HID Monitor\HIDMonitor.exe" in instance "{ad897acd-b254-459c-b246-bee11d4b87f2}" of task "\HIDMonitor". Additional Data: Error Value: 2147942667.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-TaskScheduler" Guid="{DE7B24EA-73C8-4A09-985D-5BDADCFA9017}" />
<EventID>203</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>203</Task>
<Opcode>101</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-10-26T23:50:22.438999200Z" />
<EventRecordID>230110</EventRecordID>
<Correlation ActivityID="{AD897ACD-B254-459C-B246-BEE11D4B87F2}" />
<Execution ProcessID="768" ThreadID="2632" />
<Channel>Microsoft-Windows-TaskScheduler/Operational</Channel>
<Computer>W8Test</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="ActionLaunchFailure">
<Data Name="TaskName">\HIDMonitor</Data>
<Data Name="TaskInstanceId">{AD897ACD-B254-459C-B246-BEE11D4B87F2}</Data>
<Data Name="ActionName">C:\Program Files\Acer Incorporated\HID Monitor\HIDMonitor.exe</Data>
<Data Name="ResultCode">2147942667</Data>
</EventData>
</Event>
¯\_(ツ)_/¯

Is there a way to recover my tabs after using the Firefox "Forget the last" feature?

Hi,
So I'm a big dummy and used the "Forget the last" button on Firefox (I'm using version 34.0.5) without fully understanding what it does (note: I only selected it to forget the last five minutes, if that helps anything). It exited my session and restarted with a clean Firefox window, but now I can't access my tabs anymore. I've been reading some of the similar questions about recovering tabs and tried their solutions but this case seems to be different and so I am lost.
Here's what I did:
*Made sure that all file types were now visible
*Went to my Firefox profile folder and made a copy of everything as soon as I could
*Tried looking through the files that were there (the only relevant ones that seem to be there are recovery.bak and recovery.js)
*Couldn't find any useful information in these files. There was certainly no list of tabs for me to use
*Still haven't exited the Firefox session since it restarted and wiped away everything. I see that in some support tickets here that closing Firefox is necessary, but honestly right now I'm too nervous to try that
*Become increasingly frustrated, open a Mozilla support account and post this
I'm quite reliant on my tabs. Have I done something wrong here? Is there any way to restore them, or am I just screwed in this particular case? I made certain to look at this forum and do everything the solutions to similar problems said to do.
For what it's worth, Firefox has crashed a few times over the last week and had to start up again, so maybe that backed up a version somewhere? I would even be alright with a somewhat older version of tabs (I have some dating back to months ago and that contain information I would very much like to access again).
Any help would be very much appreciated, and I would be happy to provide more information if it's needed.

The sessionstore.js file only exists while Firefox is closed. During shutdown, Firefox writes out that file based (I think) on recovery.js as of that point. When Firefox starts back up again, it reads sessionstore.js and deletes it. So if Firefox is running, it's normal not to see sessionstore.js. Anyway, sessionstore.js is going to be empty now.
Shadow Explorer might already have done this for you, but just in case...
You could try the previous versions feature. This is harder to get to on Windows 8 and 8.1, but I have read about a roundabout way. I can't test this myself, but here's what you do:
Let's say you have a Windows Explorer window open to your current Firefox profile folder. This is something like (with your username and semi-random profile folder name):
C:\Users\''username''\AppData\Roaming\Mozilla\Firefox\Profiles\blahblah
Click in the address bar and change the C: to
\\localhost\c$
to yield (with your username and semi-random profile folder name)
\\localhost\c$\Users\''username''\AppData\Roaming\Mozilla\Firefox\Profiles\blahblah
Press Enter to reload the folder contents that way.
Now when you right-click recovery.js, recovery.bak, backup.js or sessionstore.js and choose Properties, there should be a Previous Versions tab. Usually the most recent previous version dates back to the last time Windows created a restore point (e.g., system update or possibly scheduled on a more frequent basis).

Can Not Use LAST Button to go Back to DVR Recording

My LAST button works fine from chanell to channel. I can be watching a DVR recording, and the box will go back to the live channel I was watcing when I hit LAST. If the LASt button is pressed again, it does NOT go back to DVR. I know with Comcast, the LAST button would go back and forth from live to DVR recordings.
Anyone found a work around for this? We be nice to go back and forth from DVR to live TV with just using the LAST button.

This is one of the few things I miss from Comcast. Monday nights I'll be watching 24 and recording Raw. I would always switch over to wrestling during the commercials on 24. A previous easy button press now requires navigating menus.

The last Button results outOfMemory error

Similar Messages

Maybe you are looking for