HTMLTree to display BW Hierarchy

Hi,
is there any way to to display bw hierarchy tree with <htmlb:tree>?
The structure of BW NODEs is like follows:
ID
TYPE
NAME
PARENT
CHILD
NEXT
TLEVEL
TLOCK
STATUS
INCLUDE
LINK
Thank you in advance!
ag

for the tree table use the table of type TVIEW2.
and the tlevel can be max 2 chars long.
to build the tree in BSP side, its enough if you pass the following fields.
status
childid
parentid
text
treeid
Regards
Raja

Similar Messages

No Display of Hierarchy in BI 7.0

Hi,
I have sucessfully loaded the Hierarchy for 0WBS_ELEMT IN BI 7.0.
However, when I run my BEx Report, the 0WBS_ELEMT does NOT display the hierarchy. Indeed it just accumulates the Key Figure values and displays in as '#'
The 0WBS_ELEMT Master Data is Active. In BEX, the Hierarchy has been assigned under properties. Also, upon inspection of the MultiProvider it does correctly show the assigned WBS ELEMENT.
Can some please advice ?
FYI, we are using BW 3.5 data sources but in BI 7.0 on Patch Level 8
Thanks

Few questions
1) Is it only the WBS hierarchy having problems ,are all other hiearchies working ??
2)Did you Try removing hiearchy from the properties tab of WBS_ELEMT and check if the data(Transaction) is populating first for WBS_ELEMT...put WBS_ELEMT in the ROW of query with your KEY FIGS.
3)If not check in the listcube for cube contents if you have any transaction data for WBS_ELEMT.
4)Did you Remove any filters if any ...
Hope it Helps
Chetan
@CP..

How to display the Hierarchy Node Level in BEx

Hi Folks,
In my report I have a Hierarchy. I have to display the Node level of the Hierarchy in the output.
For Eg:
If I have BB under AA root node then in the output it should display Level 1 for AA and Level 2 for BB.
Thanks in Advance.
Regards,
Srikanth N

I don't think it is possble to display the hierarchy level in the report itself.
However, if you go to properties of the characteristic where you have the hierarchy defined, there you can expand the hierarchy to a pre-defined level...I guess you know that.
AT

Display of Hierarchy Nodes as Medium Text in Web Report

Hello everyone,
Does anybody know how to display the hierarchy nodes as medium text instead of short text (default) in web report?
I know it is possible to change the display setting directly (by right clicking on hierarchy node > properties) from the web report.
However, I would love to know if there is any other way to change the settings such as through Query designer or Hierarchy maintenance in SAP GUI so that users do not need to change the display settings every time they view the web report.
Your help is kindly appreciated.

Thank you Shabar for you quick reply.
What if a Hierarchy is created under an InfoObject? How can I change the Text view of each name of the Hierarchy nodes?
In Query Designer, I tried to change the Text View to Long but it only affects the text of the InfoObject but not the Hierarchy nodes.
I tried the 2nd suggestion too. I only can find the BEx description for the InfoObject but not the Hierarchy nodes.
It would be great if anyone could tell me how to do so.
Thanks in advance.

Control display level for "display as hierarchy" in BI 7 Query Designer ?

Hi
I'm using BI 7.0 query designer and I can see there's an additional difference between BI 3.5 and BI 7.0 in rows/columns behavior, in the "display as hierarchy" functionality.
In BW 3.5 one could specify till what level the expand needed to be by default. So it could be 0 for totally collapsed. This is seems not possible anymore in BI 7.0 query designs anymore. Only on natural/technical hierarchies (cost center etc ...) this option is still there.
Is there a way (javascript or other) to have the hierarchies created by "display as hierarchy" also fully collapsed by default ?
Thanks.
Geert

HI, thanks for the reply.
But this is not about the standard InfoObject 'hierarchy" tab, with all it's options on default expand levels etc.
This is about a "pseudo structure" hierarchy which is defined at designtime (in Query Designer) and generated/shown at runtime (so bad for performance, I know). It's based on the real transaction data, not on a pre-created hierarchy as in normal hierarchies. It creates a tree view of otherwise unrelated InfoObjects, displays it in an collapsible/expandable tree shape.
it's a bit hidden in version 7 Query Designer, compared to version 3.5. In 3.5 one had a larger set of options, including the -now lacking- default expand-to level. But in Version 7, most options are dropped. Probably due to the move from the ABAP to the java backend, lots of other stuff got culled in that move as well.
For more info, look at the posts from Larry in this thread : [Display as Hierarchy|Display as Hierarchy]
I know it's an option not used a lot but can be handy in certain cases.
I really would like some help in getting a default query result with the "display as Hierarchy" collapsed.
Thanks,
Geert

'Display as hierarchy' in the Query Designer

Hi,
Can anyone highlight some points or importance of 'display as hierarchy' in either rows or columns in the query designer. Also could someone put some thoughts on the 'new structure' in the query designer, is it just that we can create some new selection and new formula from the structure or is there any other explanation for its existence. Any kind of explanation would be greatly appreciated.
Thanks,
Anjali.

Hi Anjali,
display as Hierarchies:
simply enables you to select and use hierarchies for that InfoObject if available.
Structures:
you can create structures with or without keyfigures. Structures give you a great deal of flexibility and consistancy in your reports. Eg. you can create a structure that gives you a drilldown on char selections that are different for each line or column. We use that to "simulate" divisions in a drilldown that we don't have backed up by masterdata.
Also structures enable you to keep reports consistant by using the same global structure eg. for all Contribution margin reports
Hope that helped,
regards,
michael

Display organization hierarchy Oracle HR in columns

Dear gurus,
I need to display organization hierarchy Oracle HR in columns not in rows. like this
NAME1 NAME2 NAME3 NAME4
Directorate of Finance Accounting Sub Dir Financial Acc Div Exp Acc Dept
Directorate of Finance Accounting Sub Dir Financial Acc Div Revenue Dept
Directorate of Finance Business Cont Sub Dir Budget Div HO Budget Dept
Is there any ever do this ? I hope somebody could give me the queries
rdgs,

within a custom plsql function you can concatenate the organizations to construct the line as required.

Use of the "Display file hierarchy" for docmentation purposes

In teststand 4.1 the Display file hierarchy was introduced. I want to use the generated call graph and legend for documentation purposes (preferably in an automated mode). I have modfied the doc_gen seqence provided with Teststand to suite most of my needs, but I cannot find any methods to access the call graph
Anyone does this before or have additional information on how to to this
Regards Øyvind Standal

A method to retrieve the call graph would be great!
I just discovered that NI Idea Exchange only has a forum for LabVIEW. Maybe it's time to add TestStand the the Idea Exchange. Where do I suggest this idea?!
Message Edited by Phillip Brooks on 08-19-2009 01:56 PM
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Display territory hierarchy

Hi,
I want to display territory hierarchy in the portal. Is there any standard BSP to do the same?
Is this hierarchy is available in CRM business package?
Thanks in advance.

Vinit,
Try to use BAPI "BAPI_TERRITORY_GETDETAIL".Even you can see SAP Note 683127 if it helpful
Raja T
Message was edited by:
Raja T

Displaying ALV hierarchy at a certain level

Hi all,
I have an ALV report that shows a hierarchy. This ALV hierarchy is created using std class CL_GUI_ALV_TREE.
The number of hierarchy levels is dynamic and only determined during run time. However I would like to be able to either display all nodes expanded or only the last node unexpanded. In other words I would like to control which hierarhcy level is expanded when the report is first displayed.
Can anyone suggest a way to do this please?
Thanks

If you want to display the sum for a given hierarchy level, you should use CUBESET function.
e.g.
=IF(B2="all",CUBESET("mycube","[Location].[Location Hierarchy].[Department].&[DEPT 07]","all"),Cubemember("MyCube","[Location].[Location Hierarchy].[Department].&[DEPT 07].&["&B1&"]"))
Hope it helps.

Problem in displaying sub-totals using a structure displayed as hierarchy

In a report, i'd like to display in rows a characteristic and a structure. All of that displayed as a 2 levels hierarchy.
Results on structure rows doesnt aggregate themselves on characteristic rows. I have no result on my first level of hierarchy?

Hi,
   Write as :
   loop at <internal_table> ....
      V_TBL2 = V_TBL2 + SBL1.
      V_PTBL2 = V_PTBL2 + PSBL1.
      if....
      ELSEIF ( PSCH EQ 'N' OR PSCH EQ 'O' OR PSCH EQ 'P' ).
       AT END OF SG.
          TBL2 = V_TBL2 .
          PTBL2 = V_PTBL2 .
          clear : V_TBL2 , V_PTBL2.
       ENDAT.
   ENDIF.
ENDLOOP.
Regards,
Srini.

Display tree hierarchy in adobe print form scenario

Hi
Can someone suggest what is the best way to create a tree structure in adobe print scenario ? can we display icon also next to the text in the tree. For example I want to get folder and file icons also along with their names in hierarchial manner.
Regards
vishal

hi,
to populate the dropdown list you can do it...
1). manually or
2). by code
1). <b>manually</b> go to interactive form->edit
     go to Object tab->field tab ->
     you must see something like
     List Items :
     Text     + x
     click on the green + sign...
     it promps you to type. type in the value press enter... and so on...
2) <b>by Code...</b>
    //set up contents of a drop down list dynamically...
    IWDAttributeInfo countryInfo = wdContext.nodeTravelData().getNodeInfo().
            getAttributeInfo().getAttribute("DestinationCountry");
    ISimpleTypeModifiable countryType =
            countryInfo.getModifiableSimpleType();
    IModifiableSimpleValueSet countryValueSet =
            countryType.getSVServices().getModifiableSimpleValueSet();
    countryValueSet.put("1","Germany");
    countryValueSet.put("2","UK");
This will work....
regards,
-amol gupta

How to change the display of Hierarchy in EVDRE

I want to change the display of the hierarchy as first child and then parent. instead of first parent then child.
I mean when i see the report, I have to see the values for the members and then node total .
How can i achieve this ??
Thanks in advance
Regards
KK

You may find the article I wrote for SAP Financials Expert online of interest since it explains this concept. The link is given below, but you must be a subscriber to view the entire article.
http://www.financialsexpertonline.com/article.cfm?session=&id=4558
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP BusinessObjects
Enterprise Performance Management
Regional Implementation Group

How to display a Hierarchy node for level 2 without parent and description

Hi,
How to display a node at level two at the query the first node is CLASS where hierarchy is maintained and the second node is
subclass where hierarchy is not maintained, Now I want to display the subclass in the row where it has to display its child node in one column & text in the other.

Hi,
I dont think this would be feasible to display in different columns.
-Vikram

Display No hierarchy for Funds Center in a report painter

Dear Gurus
I would like know how can I display a NO HIERARCHY although I already choose a '0SAP' Hierarchy as a characteristic in a report painter.
We are upgrading from 4.0 to ECC 6.0 and there in former version I could display that but not now in version 6.0.When a type in Hierarachy Seletion doesnu2019t appear an option No Hierachy as we would like . Only appear a message u201CHierachy u20180SAPu2019 chosen for characteristic u2018Funds centeru2019u201D.
Could anybody give me any tip in order I could display an option NO HIERACHY?
Thks in advance, Jose Higino

Thank you Minghong, it works.
Chiheb

HTMLTree to display BW Hierarchy

Similar Messages

Maybe you are looking for