Http authentication failing on all sites, does not even prompt me for user/pass
Hi,
After an apt-get update, sites that use HTTP authentication do not prompt for credentials and go straight to HTTP:401. It is only affecting this browser, others have no issues. I also updated a FF in Windows, no issues there after the update.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Similar Messages
-
Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Website: g01cdwascl002.ahe.pok.ibm.com
Owner: This web site does not supply ownership information.
Verified by: Not specified
Technical Details:
Connection not encryptedYou can set the pref <b>browser.urlbar.trimURLs</b> to <i>false</i> on the <b>about:config</b> page to see the http: protocol.
You can set the pref <b>browser.urlbar.formatting.enabled</b> to <i>false</i> on the <b>about:config</b> page to disable the highlighting of the domain and see the full URL more clearly.
*http://kb.mozillazine.org/about:config
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
Today, when I tried to open web sites in Firefox from my Bookmarks, I could not. I continually received the following error message: This web site does not supply identity information.
I noticed that when I put the cursor on the box to the left of the address, that message appears. There is also '''no''' https:// before the address.
Can anyone help correct this problem? I believe sometime last week I may have fiddled with the Secutity settings in the Tools/Security option box and may have screwed up something trying not to have sites use cookies to track me?
Thanks,
BobYou can set the pref <b>browser.urlbar.trimURLs</b> to <i>false</i> on the <b>about:config</b> page to see the http: protocol.
You can set the pref <b>browser.urlbar.formatting.enabled</b> to <i>false</i> on the <b>about:config</b> page to disable the highlighting of the domain and see the full URL more clearly.
*http://kb.mozillazine.org/about:config
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
I cleared the cache and my site does not update! What's the secret?
I cleared the cache and my site does not update! What's the secret? I created a second website and bought a domain name. You can get to the site by it's mac name or the purchased domain name. I linked the domain name and with my server and it works. The site comes up wither way. BUT, either way, I cannot get my changes to appear. I had realized that my links were not working because I had placed them within the header. So, I moved the links out of the header, republished, and now the new pages (with links in body of website) will not load. Here are the two ways to get to see the site. Both show the old way (links in header). What is up with me not being able to see the changes in either Firefox or Safari?
http://www.frankysoldiesbutgoodies.com/
http://web.mac.com/musbegin/iWeb/OldiesButGoodies/OldiesButGoodies.html
Thanks,
musicalbeginningshello mccormick.lee, please try downloading the full setup file for the current firefox version from https://www.mozilla.org/firefox/all/ and install it on top of your current installation.
-
My e mail keeps coming back with a message saying failed because the server does not allow relaying. Please help
Check the suggestions at this website. They may help you get email working all the time.
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/ -
Site does not show correct on Samsung Tablet
Hi all,
I've seen a few questions regarding Muse sites not being displayed correct on a Samsung Tablet. My problem is similar but still different. The site is displaying correct on the desktop/ipad/iphone but not on the Samsung Tablet.
In the previewt his is not shown. Now I also know that the preview more or less simulates how a site should look.
This is the site: www.uwpersoonlijkeoptieadviseur.nl (a dutch site).
I have looked at the links and they seem to be ok. I mean all the links link to the Tablet version.
cheers,
LarryHi sanjit, the thing is that on a samsung tablet from around 3 years old the problem occurs. But on a samsung tablet almost a year /2years old the site displays correct.
Both of them has got android 4.04
See the image with the specs in which it loads correct.(white background)
And here the specs of a older one (dark grey one And arround 3 years old)
And this problem occurs:
So on a newer tablet it shows correct.
Verstuurd vanaf mijn iPhone
Op 1 apr. 2014 om 17:22 heeft Sanjit_Das <[email protected]> het volgende geschreven:
Re: Site does not show correct on Samsung Tablet
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi Larry
Please let me know if there is any specific page element not showing up correctly on Tablet.
Also which browser are you using , browser version would help. Do you see the same problem with any other browser on same tablet.
The device details would also help.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6261109#6261109
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6261109#6261109
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6261109#6261109. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
I have inserted a java script web wiget on my web site by copy and paste. It works fine in IE (shows, updates data etc). In FFox it does not even show up and no error messages are given. If I look at the code in FFox, it is shown. Is there a problem with my web site or am I short something in FFox?
To avoid confusion:
*http://kb.mozillazine.org/JavaScript_is_not_Java -
I am trying to open a service request and the site does not work.
I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.
I just went through several screens and had no problems. Try clearing your browser's cache and/or history.
-
Site does not load after some minutes of creation or after restart the server
Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, ConfiguringHi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring -
Hello all,
I have what so far appears to be a fairly unique problem. We are running a multilingual SharePoint 2010 environment with English as the default language and French as the secondary. We have setup the sites in a variance relationship, but the
issue I am discussing happens outside of a variant as well.
We have created a library outside the variant (but within the collection) that the two sites must share. A list view web part was created via Designer to add to each site to provide a quick view into the list. If we are in the libary and switch
to French, then update the column label it will remember the setting (because of the resource file) and maintain it as the language is flipped back and forth. Where it doesn't work is as a web part in a variant or where the language is different.
If the language is different, the out of the box columns work find, but the custom columns (all site columns not library\list columns) remain as the english label. It doesn't matter if within a variant or outside with the browser language changed.
It always reverts back to English. It's like it isn't using the same resource file that was used in the list itself.
I created a custom view and modified it with xslt as per
http://sharepoint.stackexchange.com/questions/50004/how-to-change-column-title-for-a-view-but-not-modify-the-list but this only worked within the list and did not occur in the list view either.
I can't be the first that has come across it, either I am not performing my searches properly, no one has ever documented a fix for this or this is something we just can't fix with OOTB tools. That's the other thing, the solution has to be accomplised
OOTB or with minor client side changes. I can't fire up Visual Studio because they are piloting Office 365 and have put a "No custom code" mandate on for migration.
Thank you all in advance.Ok, I have come up with a solution. I edited the XSLT for the web part on the page. I did the following:
1. Create the variants in the Site Ccollection
2. Create the library outside of the variants.
3. Add all the columns you require for the library. It is very important all the columns are there before you move on.
4. Create a French and English view.
5. Create the list view web part via designer.
6. Add the list view web part to each site selecting the appropriate view to use.
7. Edit the page in SharePoint Designer 2010.
8. Place cursor in the column you wish to modify.
9. Click Design in the List View Tools on the ribbon.
10. Then click Customize XSLT and select Customize Item. Select this option otherwise you will generate a **LOT** of unnecessary XSL code.
11. You are looking for a piece that resembles the following:
<xsl:with-param name="fieldtitle">
<xsl:value-of select="@DisplayName"/>
</xsl:with-param>
12. Modify it by typing in the actual column name you want. You should end up with something like this:
<xsl:with-param name="fieldtitle">
New Column Name.
</xsl:with-param>
13. Now, for this page only, the column will be renamed.
There are some caveats:
1. Doesn’t appear to work in a publishing portal. I think this has to do with how SP stores the pages in this case. In a publishing portal you can only modify the page layout which won’t work as we need to modify the content.
2. If you add another column, you will need to repeat the XSLT modification
Anyways, I hope this helps out any others with the same issue or need as I had. -
Error - The site does not contain a default keywords termstore
Getting the "The site does not contain a default keywords termstore" error in mysites (SharePoint 2010). The "This service application is
the default storage location for Keywords." box is already checked. Which from my Googling, is normally the fix.
Any ideas on what else i can try?Hi,
According to your post, my understanding is that you get an error in SharePoint 2010 My site.
Do you have more than one managed metadata service applications set as the default for the same web application?
If you have more than one managed metadata service applications, you can try to uncheck the “This service application is the default storage location for keywords” option for other managed metadata service applications.
If you have only one managed metadata service applications, you can try to delete this managed metadata service application and create a new one to test if it works.
For more information, you can refer to:
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://technet.microsoft.com/en-us/library/gg750250(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ee530391(v=office.14).aspx
Best Regards,
Yumi Fu -
Mysite Error - The site does not contain a default keywords termstore
I know this error has to do with the Managed Metadata Service. I recently had to delete my User Profile Service and Search Service, and then recreate new ones. Do I need to connect them to the existing Managed Metadata Service somehow?
I get this error when trying to change certain user profile columns in Mysites.Go to the list of shared services in Central admin, highlight the Managed Metadata Service Proxy and select the properties button from the Ribbon. You'll see four checkboxes. Make sure the one labeled 'This service application is the default
storage location for Keywords' is checked. Depending on the order of installation of services or if the Managed Metadata service is deleted and recreated this sometimes doesn't happen.
http://social.technet.microsoft.com/Forums/en-US/3cba2f1a-c1c7-4aed-b46e-6247f6a14e88/after-setting-everything-up-successfully-error-the-site-does-not-contain-a-default-keywords?forum=sharepointadminlegacy
http://technet.microsoft.com/en-us/library/gg750250%28v=office.14%29.aspx
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://www.deliveron.com/blog/post/Define-the-default-Term-store-for-New-keywords-in-SharePoint-2010.aspx -
My computer has been acting weird lately. Shuts itself off, the mouse goes off in all directions, does not go into sleep mode sometimes, instead shows a gray screen with word definitions in large 3" letters that continuosly flows across the screen. Do I have a virus?
Doesn't really sound like a virus.
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
How many of these you can answer...
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?
Maybe you are looking for
-
Hello All... I am having many issues with BEx Broadcaster when it comes to scheduling. Thought someone may be able to give me some advice here. Ok, so I am scheduling about 20 web templates to output into PDF and be broadcasted over to the portal in
-
Why can I not upload any images from my iPhone 4 to my Macbook Pro? Please help!
Hi all, I'm pretty much tearing my hair out with this one, I don't know what to do - I simply cannot upload any photos from iPhone 4 to Macbook Pro. This problem appeared out of the blue. I am trying to upload to iPhoto - not working. I have clearing
-
Webkit JS Core Bug in Math operation
https://bugs.webkit.org/show_bug.cgi?id=40367 When will Apple push out official Safari updates to fix this bug in Safari 4.1 and Safari 5.
-
A week or two ago, I got home from work, opened up iTunes to listen to some music, and the blayback is INCREDIBLY jumpy. It's to the point where it's unlistenable. I called Apple Support, who weren't the greatest deal of help, and they told me to uni
-
Problem with one time where clause
Hi All, I am working with Oracle Forms 10g. I have developed A new custom with Find window in that form. When we open the form First the find window will come first, and i have 10 fields in that form. For example PO number, supplier name,supplier sit